From 4065d1e7b2164cff4af57b58fac887df2fe75d2a Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 31 Jan 2012 00:18:00 -0800 Subject: Input: add Cypress TTSP capacitive multi-touch screen support Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/input/cyttsp.h | 58 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 include/linux/input/cyttsp.h (limited to 'include/linux/input') diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h new file mode 100644 index 000000000000..5af7c66f1fca --- /dev/null +++ b/include/linux/input/cyttsp.h @@ -0,0 +1,58 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) + * + */ +#ifndef _CYTTSP_H_ +#define _CYTTSP_H_ + +#define CY_SPI_NAME "cyttsp-spi" +#define CY_I2C_NAME "cyttsp-i2c" +/* Active Power state scanning/processing refresh interval */ +#define CY_ACT_INTRVL_DFLT 0x00 /* ms */ +/* touch timeout for the Active power */ +#define CY_TCH_TMOUT_DFLT 0xFF /* ms */ +/* Low Power state scanning/processing refresh interval */ +#define CY_LP_INTRVL_DFLT 0x0A /* ms */ +/* Active distance in pixels for a gesture to be reported */ +#define CY_ACT_DIST_DFLT 0xF8 /* pixels */ + +struct cyttsp_platform_data { + u32 maxx; + u32 maxy; + bool use_hndshk; + u8 act_dist; /* Active distance */ + u8 act_intrvl; /* Active refresh interval; ms */ + u8 tch_tmout; /* Active touch timeout; ms */ + u8 lp_intrvl; /* Low power refresh interval; ms */ + int (*init)(void); + void (*exit)(void); + char *name; + s16 irq_gpio; + u8 *bl_keys; +}; + +#endif /* _CYTTSP_H_ */ -- cgit v1.2.3-71-gd317 From b89529a10c954f14191367355da2a6053c49abb9 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 12 Jan 2012 19:40:34 +0100 Subject: Input: Use accessor for MT values The current MT accessor function does not distinguish between the MT values and the slot specification event. Add an accessor function for the values only, and use it where appropriate. Signed-off-by: Henrik Rydberg --- drivers/input/input.c | 2 +- include/linux/input/mt.h | 8 ++++++-- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'include/linux/input') diff --git a/drivers/input/input.c b/drivers/input/input.c index 1f78c957a75a..8921c6180c51 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -180,7 +180,7 @@ static int input_handle_abs_event(struct input_dev *dev, return INPUT_IGNORE_EVENT; } - is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST; + is_mt_event = input_is_mt_value(code); if (!is_mt_event) { pold = &dev->absinfo[code].value; diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index 318bb82325a6..f86737586e19 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -48,10 +48,14 @@ static inline void input_mt_slot(struct input_dev *dev, int slot) input_event(dev, EV_ABS, ABS_MT_SLOT, slot); } +static inline bool input_is_mt_value(int axis) +{ + return axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST; +} + static inline bool input_is_mt_axis(int axis) { - return axis == ABS_MT_SLOT || - (axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST); + return axis == ABS_MT_SLOT || input_is_mt_value(axis); } void input_mt_report_slot_state(struct input_dev *dev, -- cgit v1.2.3-71-gd317 From 1b8be32e6914ed862a5ce460c0a0b418ba85d2b7 Mon Sep 17 00:00:00 2001 From: Rachna Patil Date: Sun, 4 Mar 2012 08:11:57 -0800 Subject: Input: add support for TI Touchscreen controller This patch adds support for TI's touchscreen controller for a 4/5/8 wire resistive panel that is directly fed to the ADC. This touchscreen controller will be part of AM335x TI SoC. The TRM can be found at: http://www.ti.com/lit/ug/spruh73a/spruh73a.pdf Signed-off-by: Patil, Rachna Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/ti_tscadc.c | 486 ++++++++++++++++++++++++++++++++++ include/linux/input/ti_tscadc.h | 17 ++ 4 files changed, 516 insertions(+) create mode 100644 drivers/input/touchscreen/ti_tscadc.c create mode 100644 include/linux/input/ti_tscadc.h (limited to 'include/linux/input') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2b21a7066d36..5df719b591c3 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -460,6 +460,18 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. +config TOUCHSCREEN_TI_TSCADC + tristate "TI Touchscreen Interface" + depends on ARCH_OMAP2PLUS + help + Say Y here if you have 4/5/8 wire touchscreen controller + to be connected to the ADC controller on your TI AM335x SoC. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ti_tscadc. + config TOUCHSCREEN_ATMEL_TSADCC tristate "Atmel Touchscreen Interface" depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index d9acbdcda3d9..e748fb837759 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o +obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC) += ti_tscadc.o obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c new file mode 100644 index 000000000000..d229c741d544 --- /dev/null +++ b/drivers/input/touchscreen/ti_tscadc.c @@ -0,0 +1,486 @@ +/* + * TI Touch Screen driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_IRQEOI 0x020 +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_STEPCONFIG13 0x0C4 +#define REG_STEPDELAY13 0x0C8 +#define REG_STEPCONFIG14 0x0CC +#define REG_STEPDELAY14 0x0D0 +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +#define IRQWKUP_ENB BIT(0) +#define STPENB_STEPENB 0x7FFF +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) +#define STEPCONFIG_MODE_HWSYNC 0x2 +#define STEPCONFIG_SAMPLES_AVG (1 << 4) +#define STEPCONFIG_XPP (1 << 5) +#define STEPCONFIG_XNN (1 << 6) +#define STEPCONFIG_YPP (1 << 7) +#define STEPCONFIG_YNN (1 << 8) +#define STEPCONFIG_XNP (1 << 9) +#define STEPCONFIG_YPN (1 << 10) +#define STEPCONFIG_INM (1 << 18) +#define STEPCONFIG_INP (1 << 20) +#define STEPCONFIG_INP_5 (1 << 21) +#define STEPCONFIG_FIFO1 (1 << 26) +#define STEPCONFIG_OPENDLY 0xff +#define STEPCONFIG_Z1 (3 << 19) +#define STEPIDLE_INP (1 << 22) +#define STEPCHARGE_RFP (1 << 12) +#define STEPCHARGE_INM (1 << 15) +#define STEPCHARGE_INP (1 << 19) +#define STEPCHARGE_RFM (1 << 23) +#define STEPCHARGE_DELAY 0x1 +#define CNTRLREG_TSCSSENB (1 << 0) +#define CNTRLREG_STEPID (1 << 1) +#define CNTRLREG_STEPCONFIGWRT (1 << 2) +#define CNTRLREG_4WIRE (1 << 5) +#define CNTRLREG_5WIRE (1 << 6) +#define CNTRLREG_8WIRE (3 << 5) +#define CNTRLREG_TSCENB (1 << 7) +#define ADCFSM_STEPID 0x10 + +#define SEQ_SETTLE 275 +#define ADC_CLK 3000000 +#define MAX_12BIT ((1 << 12) - 1) +#define TSCADC_DELTA_X 15 +#define TSCADC_DELTA_Y 15 + +struct tscadc { + struct input_dev *input; + struct clk *tsc_ick; + void __iomem *tsc_base; + unsigned int irq; + unsigned int wires; + unsigned int x_plate_resistance; + bool pen_down; +}; + +static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg) +{ + return readl(ts->tsc_base + reg); +} + +static void tscadc_writel(struct tscadc *tsc, unsigned int reg, + unsigned int val) +{ + writel(val, tsc->tsc_base + reg); +} + +static void tscadc_step_config(struct tscadc *ts_dev) +{ + unsigned int config; + int i; + + /* Configure the Step registers */ + + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + case 5: + config |= STEPCONFIG_YNN | + STEPCONFIG_INP_5 | STEPCONFIG_XNN | + STEPCONFIG_YPP; + break; + case 8: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + } + + for (i = 1; i < 7; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN | + STEPCONFIG_INM | STEPCONFIG_FIFO1; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_YPP; + break; + case 5: + config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 | + STEPCONFIG_XNP | STEPCONFIG_YPN; + break; + case 8: + config |= STEPCONFIG_YPP; + break; + } + + for (i = 7; i < 13; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + /* Charge step configuration */ + config = STEPCONFIG_XPP | STEPCONFIG_YNN | + STEPCHARGE_RFP | STEPCHARGE_RFM | + STEPCHARGE_INM | STEPCHARGE_INP; + + tscadc_writel(ts_dev, REG_CHARGECONFIG, config); + tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY); + + config = 0; + /* Configure to calculate pressure */ + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP | + STEPCONFIG_XNN | STEPCONFIG_INM; + tscadc_writel(ts_dev, REG_STEPCONFIG13, config); + tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY); + + config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1; + tscadc_writel(ts_dev, REG_STEPCONFIG14, config); + tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); +} + +static void tscadc_idle_config(struct tscadc *ts_config) +{ + unsigned int idleconfig; + + idleconfig = STEPCONFIG_YNN | + STEPCONFIG_INM | + STEPCONFIG_YPN | STEPIDLE_INP; + tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig); +} + +static void tscadc_read_coordinates(struct tscadc *ts_dev, + unsigned int *x, unsigned int *y) +{ + unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT); + unsigned int prev_val_x = ~0, prev_val_y = ~0; + unsigned int prev_diff_x = ~0, prev_diff_y = ~0; + unsigned int read, diff; + unsigned int i; + + /* + * Delta filter is used to remove large variations in sampled + * values from ADC. The filter tries to predict where the next + * coordinate could be. This is done by taking a previous + * coordinate and subtracting it form current one. Further the + * algorithm compares the difference with that of a present value, + * if true the value is reported to the sub system. + */ + for (i = 0; i < fifocount - 1; i++) { + read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + diff = abs(read - prev_val_x); + if (diff < prev_diff_x) { + prev_diff_x = diff; + *x = read; + } + prev_val_x = read; + + read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + diff = abs(read - prev_val_y); + if (diff < prev_diff_y) { + prev_diff_y = diff; + *y = read; + } + prev_val_y = read; + } +} + +static irqreturn_t tscadc_irq(int irq, void *dev) +{ + struct tscadc *ts_dev = dev; + struct input_dev *input_dev = ts_dev->input; + unsigned int status, irqclr = 0; + unsigned int x = 0, y = 0; + unsigned int z1, z2, z; + unsigned int fsm; + + status = tscadc_readl(ts_dev, REG_IRQSTATUS); + if (status & IRQENB_FIFO1THRES) { + tscadc_read_coordinates(ts_dev, &x, &y); + + z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + + if (ts_dev->pen_down && z1 != 0 && z2 != 0) { + /* + * Calculate pressure using formula + * Resistance(touch) = x plate resistance * + * x postion/4096 * ((z2 / z1) - 1) + */ + z = z2 - z1; + z *= x; + z *= ts_dev->x_plate_resistance; + z /= z1; + z = (z + 2047) >> 12; + + if (z <= MAX_12BIT) { + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, z); + input_report_key(input_dev, BTN_TOUCH, 1); + input_sync(input_dev); + } + } + irqclr |= IRQENB_FIFO1THRES; + } + + /* + * Time for sequencer to settle, to read + * correct state of the sequencer. + */ + udelay(SEQ_SETTLE); + + status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS); + if (status & IRQENB_PENUP) { + /* Pen up event */ + fsm = tscadc_readl(ts_dev, REG_ADCFSM); + if (fsm == ADCFSM_STEPID) { + ts_dev->pen_down = false; + input_report_key(input_dev, BTN_TOUCH, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); + } else { + ts_dev->pen_down = true; + } + irqclr |= IRQENB_PENUP; + } + + tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr); + /* check pending interrupts */ + tscadc_writel(ts_dev, REG_IRQEOI, 0x0); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); + return IRQ_HANDLED; +} + +/* + * The functions for inserting/removing driver as a module. + */ + +static int __devinit tscadc_probe(struct platform_device *pdev) +{ + const struct tsc_data *pdata = pdev->dev.platform_data; + struct resource *res; + struct tscadc *ts_dev; + struct input_dev *input_dev; + struct clk *clk; + int err; + int clk_value, ctrl, irq; + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data.\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined.\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq ID is specified.\n"); + return -EINVAL; + } + + /* Allocate memory for device */ + ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts_dev || !input_dev) { + dev_err(&pdev->dev, "failed to allocate memory.\n"); + err = -ENOMEM; + goto err_free_mem; + } + + ts_dev->input = input_dev; + ts_dev->irq = irq; + ts_dev->wires = pdata->wires; + ts_dev->x_plate_resistance = pdata->x_plate_resistance; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to reserve registers.\n"); + err = -EBUSY; + goto err_free_mem; + } + + ts_dev->tsc_base = ioremap(res->start, resource_size(res)); + if (!ts_dev->tsc_base) { + dev_err(&pdev->dev, "failed to map registers.\n"); + err = -ENOMEM; + goto err_release_mem_region; + } + + err = request_irq(ts_dev->irq, tscadc_irq, + 0, pdev->dev.driver->name, ts_dev); + if (err) { + dev_err(&pdev->dev, "failed to allocate irq.\n"); + goto err_unmap_regs; + } + + ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick"); + if (IS_ERR(ts_dev->tsc_ick)) { + dev_err(&pdev->dev, "failed to get TSC ick\n"); + goto err_free_irq; + } + clk_enable(ts_dev->tsc_ick); + + clk = clk_get(&pdev->dev, "adc_tsc_fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get TSC fck\n"); + err = PTR_ERR(clk); + goto err_disable_clk; + } + + clk_value = clk_get_rate(clk) / ADC_CLK; + clk_put(clk); + + if (clk_value < 7) { + dev_err(&pdev->dev, "clock input less than min clock requirement\n"); + goto err_disable_clk; + } + /* CLKDIV needs to be configured to the value minus 1 */ + tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1); + + /* Enable wake-up of the SoC using touchscreen */ + tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); + + ctrl = CNTRLREG_STEPCONFIGWRT | + CNTRLREG_TSCENB | + CNTRLREG_STEPID; + switch (ts_dev->wires) { + case 4: + ctrl |= CNTRLREG_4WIRE; + break; + case 5: + ctrl |= CNTRLREG_5WIRE; + break; + case 8: + ctrl |= CNTRLREG_8WIRE; + break; + } + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + tscadc_idle_config(ts_dev); + tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES); + tscadc_step_config(ts_dev); + tscadc_writel(ts_dev, REG_FIFO1THR, 6); + + ctrl |= CNTRLREG_TSCSSENB; + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + input_dev->name = "ti-tsc-adc"; + input_dev->dev.parent = &pdev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + + /* register to the input system */ + err = input_register_device(input_dev); + if (err) + goto err_disable_clk; + + platform_set_drvdata(pdev, ts_dev); + return 0; + +err_disable_clk: + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); +err_free_irq: + free_irq(ts_dev->irq, ts_dev); +err_unmap_regs: + iounmap(ts_dev->tsc_base); +err_release_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input_dev); + kfree(ts_dev); + return err; +} + +static int __devexit tscadc_remove(struct platform_device *pdev) +{ + struct tscadc *ts_dev = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(ts_dev->irq, ts_dev); + + input_unregister_device(ts_dev->input); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(ts_dev->tsc_base); + release_mem_region(res->start, resource_size(res)); + + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); + + kfree(ts_dev); + + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver ti_tsc_driver = { + .probe = tscadc_probe, + .remove = __devexit_p(tscadc_remove), + .driver = { + .name = "tsc", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(ti_tsc_driver); + +MODULE_DESCRIPTION("TI touchscreen controller driver"); +MODULE_AUTHOR("Rachna Patil "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h new file mode 100644 index 000000000000..b10a527a92a4 --- /dev/null +++ b/include/linux/input/ti_tscadc.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_TI_TSCADC_H +#define __LINUX_TI_TSCADC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; +}; + +#endif -- cgit v1.2.3-71-gd317 From 2cd36877ad1c61429e00c099b6903ebcd936ca00 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 13 Mar 2012 21:35:51 -0700 Subject: Input: of_keymap - add device tree bindings for simple key matrices This adds a simple device tree binding for simple key matrix data and a helper to fill in the platform data. Signed-off-by: Olof Johansson Acked-by: Stephen Warren Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/matrix-keymap.txt | 19 +++++ drivers/input/Kconfig | 4 + drivers/input/Makefile | 1 + drivers/input/keyboard/Kconfig | 1 + drivers/input/of_keymap.c | 87 ++++++++++++++++++++++ include/linux/input/matrix_keypad.h | 19 +++++ 6 files changed, 131 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/matrix-keymap.txt create mode 100644 drivers/input/of_keymap.c (limited to 'include/linux/input') diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.txt b/Documentation/devicetree/bindings/input/matrix-keymap.txt new file mode 100644 index 000000000000..3cd8b98ccd2d --- /dev/null +++ b/Documentation/devicetree/bindings/input/matrix-keymap.txt @@ -0,0 +1,19 @@ +A simple common binding for matrix-connected key boards. Currently targeted at +defining the keys in the scope of linux key codes since that is a stable and +standardized interface at this time. + +Required properties: +- linux,keymap: an array of packed 1-cell entries containing the equivalent + of row, column and linux key-code. The 32-bit big endian cell is packed + as: + row << 24 | column << 16 | key-code + +Optional properties: +Some users of this binding might choose to specify secondary keymaps for +cases where there is a modifier key such as a Fn key. Proposed names +for said properties are "linux,fn-keymap" or with another descriptive +word for the modifier other from "Fn". + +Example: + linux,keymap = < 0x00030012 + 0x0102003a >; diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 001b147c7f95..332597980817 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -25,6 +25,10 @@ config INPUT if INPUT +config INPUT_OF_MATRIX_KEYMAP + depends on USE_OF + bool + config INPUT_FF_MEMLESS tristate "Support for memoryless force-feedback devices" help diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 0c789490e0b3..b173a13a73ca 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/ obj-$(CONFIG_INPUT_MISC) += misc/ obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o +obj-$(CONFIG_INPUT_OF_MATRIX_KEYMAP) += of_keymap.o diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index cdc385b2cf7d..3371954c979b 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -394,6 +394,7 @@ config KEYBOARD_NOMADIK config KEYBOARD_TEGRA tristate "NVIDIA Tegra internal matrix keyboard controller support" depends on ARCH_TEGRA + select INPUT_OF_MATRIX_KEYMAP if USE_OF help Say Y here if you want to use a matrix keyboard connected directly to the internal keyboard controller on Tegra SoCs. diff --git a/drivers/input/of_keymap.c b/drivers/input/of_keymap.c new file mode 100644 index 000000000000..061493d57682 --- /dev/null +++ b/drivers/input/of_keymap.c @@ -0,0 +1,87 @@ +/* + * Helpers for open firmware matrix keyboard bindings + * + * Copyright (C) 2012 Google, Inc + * + * Author: + * Olof Johansson + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, + const char *propname) +{ + struct matrix_keymap_data *kd; + u32 *keymap; + int proplen, i; + const __be32 *prop; + + if (!np) + return NULL; + + if (!propname) + propname = "linux,keymap"; + + prop = of_get_property(np, propname, &proplen); + if (!prop) + return NULL; + + if (proplen % sizeof(u32)) { + pr_warn("Malformed keymap property %s in %s\n", + propname, np->full_name); + return NULL; + } + + kd = kzalloc(sizeof(*kd), GFP_KERNEL); + if (!kd) + return NULL; + + kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL); + if (!kd->keymap) { + kfree(kd); + return NULL; + } + + kd->keymap_size = proplen / sizeof(u32); + + for (i = 0; i < kd->keymap_size; i++) { + u32 tmp = be32_to_cpup(prop + i); + int key_code, row, col; + + row = (tmp >> 24) & 0xff; + col = (tmp >> 16) & 0xff; + key_code = tmp & 0xffff; + keymap[i] = KEY(row, col, key_code); + } + + return kd; +} +EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap); + +void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) +{ + if (kd) { + kfree(kd->keymap); + kfree(kd); + } +} +EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap); diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index fe7c4b9ae270..6c07ced0af81 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -3,6 +3,7 @@ #include #include +#include #define MATRIX_MAX_ROWS 32 #define MATRIX_MAX_COLS 32 @@ -106,4 +107,22 @@ matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, __clear_bit(KEY_RESERVED, keybit); } +#ifdef CONFIG_INPUT_OF_MATRIX_KEYMAP +struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname); + +void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd); +#else +static inline struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname) +{ + return NULL; +} + +static inline void +matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) +{ +} +#endif + #endif /* _MATRIX_KEYPAD_H */ -- cgit v1.2.3-71-gd317 From 043916608c4b309e98a1650520ed4e88ec5e9123 Mon Sep 17 00:00:00 2001 From: Christopher Hudson Date: Fri, 16 Mar 2012 22:47:47 -0700 Subject: Input: kxtj9 - who_am_i check value and initial data rate fixes Several fixes based on customer feedback: * WHO_AM_I value has changed since preliminary parts used for initial testing; * Output of le16_to_cpu must be saved to memory before shifting to preserve sign; * Initial data rate was not extracted from data control register init. This was causing the initial data rate to be set to maximum until it was changed. To fix this problem, it made more sense to specify initial data rate and extract the register mask from that. Signed-off-by: Chris Hudson Signed-off-by: Dmitry Torokhov --- drivers/input/misc/kxtj9.c | 22 +++++++++++++++++----- include/linux/input/kxtj9.h | 11 +---------- 2 files changed, 18 insertions(+), 15 deletions(-) (limited to 'include/linux/input') diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c index 783597a9a64a..21edaba489be 100644 --- a/drivers/input/misc/kxtj9.c +++ b/drivers/input/misc/kxtj9.c @@ -41,6 +41,14 @@ #define PC1_ON (1 << 7) /* Data ready funtion enable bit: set during probe if using irq mode */ #define DRDYE (1 << 5) +/* DATA CONTROL REGISTER BITS */ +#define ODR12_5F 0 +#define ODR25F 1 +#define ODR50F 2 +#define ODR100F 3 +#define ODR200F 4 +#define ODR400F 5 +#define ODR800F 6 /* INTERRUPT CONTROL REGISTER 1 BITS */ /* Set these during probe if using irq mode */ #define KXTJ9_IEL (1 << 3) @@ -116,9 +124,13 @@ static void kxtj9_report_acceleration_data(struct kxtj9_data *tj9) if (err < 0) dev_err(&tj9->client->dev, "accelerometer data read failed\n"); - x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]) >> tj9->shift; - y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]) >> tj9->shift; - z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]) >> tj9->shift; + x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]); + y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]); + z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]); + + x >>= tj9->shift; + y >>= tj9->shift; + z >>= tj9->shift; input_report_abs(tj9->input_dev, ABS_X, tj9->pdata.negate_x ? -x : x); input_report_abs(tj9->input_dev, ABS_Y, tj9->pdata.negate_y ? -y : y); @@ -487,7 +499,7 @@ static int __devinit kxtj9_verify(struct kxtj9_data *tj9) goto out; } - retval = retval != 0x06 ? -EIO : 0; + retval = (retval != 0x07 && retval != 0x08) ? -EIO : 0; out: kxtj9_device_power_off(tj9); @@ -537,7 +549,7 @@ static int __devinit kxtj9_probe(struct i2c_client *client, i2c_set_clientdata(client, tj9); tj9->ctrl_reg1 = tj9->pdata.res_12bit | tj9->pdata.g_range; - tj9->data_ctrl = tj9->pdata.data_odr_init; + tj9->last_poll_interval = tj9->pdata.init_interval; if (client->irq) { /* If in irq mode, populate INT_CTRL_REG1 and enable DRDY. */ diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h index f6bac89537b8..d415579b56fe 100644 --- a/include/linux/input/kxtj9.h +++ b/include/linux/input/kxtj9.h @@ -24,6 +24,7 @@ struct kxtj9_platform_data { unsigned int min_interval; /* minimum poll interval (in milli-seconds) */ + unsigned int init_interval; /* initial poll interval (in milli-seconds) */ /* * By default, x is axis 0, y is axis 1, z is axis 2; these can be @@ -52,16 +53,6 @@ struct kxtj9_platform_data { #define KXTJ9_G_8G (1 << 4) u8 g_range; - /* DATA_CTRL_REG: controls the output data rate of the part */ - #define ODR12_5F 0 - #define ODR25F 1 - #define ODR50F 2 - #define ODR100F 3 - #define ODR200F 4 - #define ODR400F 5 - #define ODR800F 6 - u8 data_odr_init; - int (*init)(void); void (*exit)(void); int (*power_on)(void); -- cgit v1.2.3-71-gd317 From 5c6a7a62c130afef3d61c1dee153012231ff5cd9 Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 16 Mar 2012 23:57:09 -0700 Subject: Input: ili210x - add support for Ilitek ILI210x based touchscreens The driver supports chipsets ILI2102, ILI2102s, ILI2103, ILI2103s and ILI2105. Such kind of controllers can be found in Amazon Kindle Fire devices. Reviewed-by: Jan Paesmans Reviewed-by: Henrik Rydberg Signed-off-by: Olivier Sobrie Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 15 ++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/ili210x.c | 360 ++++++++++++++++++++++++++++++++++++ include/linux/input/ili210x.h | 10 + 4 files changed, 386 insertions(+) create mode 100644 drivers/input/touchscreen/ili210x.c create mode 100644 include/linux/input/ili210x.h (limited to 'include/linux/input') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index fc087b3c95cf..97b31a0e0525 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -243,6 +243,21 @@ config TOUCHSCREEN_FUJITSU To compile this driver as a module, choose M here: the module will be called fujitsu-ts. +config TOUCHSCREEN_ILI210X + tristate "Ilitek ILI210X based touchscreen" + depends on I2C + help + Say Y here if you have a ILI210X based touchscreen + controller. This driver supports models ILI2102, + ILI2102s, ILI2103, ILI2103s and ILI2105. + Such kind of chipsets can be found in Amazon Kindle Fire + touchscreens. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ili210x. + config TOUCHSCREEN_S3C2410 tristate "Samsung S3C2410/generic touchscreen input driver" depends on ARCH_S3C2410 || SAMSUNG_DEV_TS diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index e748fb837759..3d5cf8cbf89c 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o +obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c new file mode 100644 index 000000000000..c0044175a921 --- /dev/null +++ b/drivers/input/touchscreen/ili210x.c @@ -0,0 +1,360 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_TOUCHES 2 +#define DEFAULT_POLL_PERIOD 20 + +/* Touchscreen commands */ +#define REG_TOUCHDATA 0x10 +#define REG_PANEL_INFO 0x20 +#define REG_FIRMWARE_VERSION 0x40 +#define REG_CALIBRATE 0xcc + +struct finger { + u8 x_low; + u8 x_high; + u8 y_low; + u8 y_high; +} __packed; + +struct touchdata { + u8 status; + struct finger finger[MAX_TOUCHES]; +} __packed; + +struct panel_info { + struct finger finger_max; + u8 xchannel_num; + u8 ychannel_num; +} __packed; + +struct firmware_version { + u8 id; + u8 major; + u8 minor; +} __packed; + +struct ili210x { + struct i2c_client *client; + struct input_dev *input; + bool (*get_pendown_state)(void); + unsigned int poll_period; + struct delayed_work dwork; +}; + +static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, + size_t len) +{ + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + } + }; + + if (i2c_transfer(client->adapter, msg, 2) != 2) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } + + return 0; +} + +static void ili210x_report_events(struct input_dev *input, + const struct touchdata *touchdata) +{ + int i; + bool touch; + unsigned int x, y; + const struct finger *finger; + + for (i = 0; i < MAX_TOUCHES; i++) { + input_mt_slot(input, i); + + finger = &touchdata->finger[i]; + + touch = touchdata->status & (1 << i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + x = finger->x_low | (finger->x_high << 8); + y = finger->y_low | (finger->y_high << 8); + + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + } + } + + input_mt_report_pointer_emulation(input, false); + input_sync(input); +} + +static bool get_pendown_state(const struct ili210x *priv) +{ + bool state = false; + + if (priv->get_pendown_state) + state = priv->get_pendown_state(); + + return state; +} + +static void ili210x_work(struct work_struct *work) +{ + struct ili210x *priv = container_of(work, struct ili210x, + dwork.work); + struct i2c_client *client = priv->client; + struct touchdata touchdata; + int error; + + error = ili210x_read_reg(client, REG_TOUCHDATA, + &touchdata, sizeof(touchdata)); + if (error) { + dev_err(&client->dev, + "Unable to get touchdata, err = %d\n", error); + return; + } + + ili210x_report_events(priv->input, &touchdata); + + if ((touchdata.status & 0xf3) || get_pendown_state(priv)) + schedule_delayed_work(&priv->dwork, + msecs_to_jiffies(priv->poll_period)); +} + +static irqreturn_t ili210x_irq(int irq, void *irq_data) +{ + struct ili210x *priv = irq_data; + + schedule_delayed_work(&priv->dwork, 0); + + return IRQ_HANDLED; +} + +static ssize_t ili210x_calibrate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + unsigned long calibrate; + int rc; + u8 cmd = REG_CALIBRATE; + + if (kstrtoul(buf, 10, &calibrate)) + return -EINVAL; + + if (calibrate > 1) + return -EINVAL; + + if (calibrate) { + rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); + if (rc != sizeof(cmd)) + return -EIO; + } + + return count; +} +static DEVICE_ATTR(calibrate, 0644, NULL, ili210x_calibrate); + +static struct attribute *ili210x_attributes[] = { + &dev_attr_calibrate.attr, + NULL, +}; + +static const struct attribute_group ili210x_attr_group = { + .attrs = ili210x_attributes, +}; + +static int __devinit ili210x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + const struct ili210x_platform_data *pdata = dev->platform_data; + struct ili210x *priv; + struct input_dev *input; + struct panel_info panel; + struct firmware_version firmware; + int xmax, ymax; + int error; + + dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + + if (!pdata) { + dev_err(dev, "No platform data!\n"); + return -EINVAL; + } + + if (client->irq <= 0) { + dev_err(dev, "No IRQ!\n"); + return -EINVAL; + } + + /* Get firmware version */ + error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, + &firmware, sizeof(firmware)); + if (error) { + dev_err(dev, "Failed to get firmware version, err: %d\n", + error); + return error; + } + + /* get panel info */ + error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel)); + if (error) { + dev_err(dev, "Failed to get panel informations, err: %d\n", + error); + return error; + } + + xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8); + ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + input = input_allocate_device(); + if (!priv || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + priv->client = client; + priv->input = input; + priv->get_pendown_state = pdata->get_pendown_state; + priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD; + INIT_DELAYED_WORK(&priv->dwork, ili210x_work); + + /* Setup input device */ + input->name = "ILI210x Touchscreen"; + input->id.bustype = BUS_I2C; + input->dev.parent = dev; + + __set_bit(EV_SYN, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + + /* Single touch */ + input_set_abs_params(input, ABS_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); + + /* Multi touch */ + input_mt_init_slots(input, MAX_TOUCHES); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); + + input_set_drvdata(input, priv); + i2c_set_clientdata(client, priv); + + error = request_irq(client->irq, ili210x_irq, pdata->irq_flags, + client->name, priv); + if (error) { + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", + error); + goto err_free_mem; + } + + error = sysfs_create_group(&dev->kobj, &ili210x_attr_group); + if (error) { + dev_err(dev, "Unable to create sysfs attributes, err: %d\n", + error); + goto err_free_irq; + } + + error = input_register_device(priv->input); + if (error) { + dev_err(dev, "Cannot regiser input device, err: %d\n", error); + goto err_remove_sysfs; + } + + device_init_wakeup(&client->dev, 1); + + dev_dbg(dev, + "ILI210x initialized (IRQ: %d), firmware version %d.%d.%d", + client->irq, firmware.id, firmware.major, firmware.minor); + + return 0; + +err_remove_sysfs: + sysfs_remove_group(&dev->kobj, &ili210x_attr_group); +err_free_irq: + free_irq(client->irq, priv); +err_free_mem: + input_free_device(input); + kfree(priv); + return error; +} + +static int __devexit ili210x_i2c_remove(struct i2c_client *client) +{ + struct ili210x *priv = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group); + free_irq(priv->client->irq, priv); + cancel_delayed_work_sync(&priv->dwork); + input_unregister_device(priv->input); + kfree(priv); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ili210x_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int ili210x_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, + ili210x_i2c_suspend, ili210x_i2c_resume); + +static const struct i2c_device_id ili210x_i2c_id[] = { + { "ili210x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); + +static struct i2c_driver ili210x_ts_driver = { + .driver = { + .name = "ili210x_i2c", + .owner = THIS_MODULE, + .pm = &ili210x_i2c_pm, + }, + .id_table = ili210x_i2c_id, + .probe = ili210x_i2c_probe, + .remove = __devexit_p(ili210x_i2c_remove), +}; + +module_i2c_driver(ili210x_ts_driver); + +MODULE_AUTHOR("Olivier Sobrie "); +MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/input/ili210x.h b/include/linux/input/ili210x.h new file mode 100644 index 000000000000..a5471245a13c --- /dev/null +++ b/include/linux/input/ili210x.h @@ -0,0 +1,10 @@ +#ifndef _ILI210X_H +#define _ILI210X_H + +struct ili210x_platform_data { + unsigned long irq_flags; + unsigned int poll_period; + bool (*get_pendown_state)(void); +}; + +#endif -- cgit v1.2.3-71-gd317