From a7b8829d242b1a58107e9c02b09e93aec446d55c Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 5 Jul 2017 20:30:01 +0200 Subject: iio: accel: st_accel: add SPI-3wire support Add SPI Serial Interface Mode (SIM) register information in st_sensor_settings look up table to support devices (like LSM303AGR accel sensor) that allow just SPI-3wire communication mode. SIM mode has to be configured before any other operation since it is not enabled by default and the driver is not able to read without that configuration Whilst a fairly substantial patch, the actual logic is simple and it is better to have the generic fix than a band aid. Fixes: ddc05fa28606 (iio: st-accel: add support for lsm303agr accel) Signed-off-by: Lorenzo Bianconi Cc: Signed-off-by: Jonathan Cameron --- include/linux/platform_data/st_sensors_pdata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index 79b0e4cdb814..f8274b0c6888 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -17,10 +17,12 @@ * Available only for accelerometer and pressure sensors. * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). * @open_drain: set the interrupt line to be open drain if possible. + * @spi_3wire: enable spi-3wire mode. */ struct st_sensors_platform_data { u8 drdy_int_pin; bool open_drain; + bool spi_3wire; }; #endif /* ST_SENSORS_PDATA_H */ -- cgit v1.2.3-71-gd317 From 36acbd9e8377c27570b887e2332a5e1f0b140e16 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Fri, 14 Jul 2017 18:16:44 +0530 Subject: mmc: host: omap_hsmmc: remove unused platform callbacks Remove unused callbacks in the omap_hsmmc_platform_data structure Signed-off-by: Faiz Abbas Acked-by: Tony Lindgren Signed-off-by: Ulf Hansson --- drivers/mmc/host/omap_hsmmc.c | 11 ----------- include/linux/platform_data/hsmmc-omap.h | 10 ---------- 2 files changed, 21 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 7c12f3715676..04ff3c97a535 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -356,9 +356,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on, struct mmc_host *mmc = host->mmc; int ret = 0; - if (mmc_pdata(host)->set_power) - return mmc_pdata(host)->set_power(host->dev, power_on, vdd); - /* * If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. @@ -366,9 +363,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on, if (IS_ERR(mmc->supply.vmmc)) return 0; - if (mmc_pdata(host)->before_set_reg) - mmc_pdata(host)->before_set_reg(host->dev, power_on, vdd); - ret = omap_hsmmc_set_pbias(host, false, 0); if (ret) return ret; @@ -400,9 +394,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on, return ret; } - if (mmc_pdata(host)->after_set_reg) - mmc_pdata(host)->after_set_reg(host->dev, power_on, vdd); - return 0; err_set_voltage: @@ -469,8 +460,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) int ret; struct mmc_host *mmc = host->mmc; - if (mmc_pdata(host)->set_power) - return 0; ret = mmc_regulator_get_supply(mmc); if (ret == -EPROBE_DEFER) diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h index 8e981be2e2c2..0ff1e0dba720 100644 --- a/include/linux/platform_data/hsmmc-omap.h +++ b/include/linux/platform_data/hsmmc-omap.h @@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data { u32 caps; /* Used for the MMC driver on 2430 and later */ u32 pm_caps; /* PM capabilities of the mmc */ - /* use the internal clock */ - unsigned internal_clock:1; - /* nonremovable e.g. eMMC */ unsigned nonremovable:1; @@ -73,13 +70,6 @@ struct omap_hsmmc_platform_data { int gpio_cd; /* gpio (card detect) */ int gpio_cod; /* gpio (cover detect) */ int gpio_wp; /* gpio (write protect) */ - - int (*set_power)(struct device *dev, int power_on, int vdd); - void (*remux)(struct device *dev, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int power_on, int vdd); /* if we have special card, init it using this callback */ void (*init_card)(struct mmc_card *card); -- cgit v1.2.3-71-gd317 From 739a6d5d640a9811beef6a828253ee184dd431c5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 11 Aug 2017 16:49:12 +0300 Subject: drm: omapdrm: Remove omapdrm platform data The omapdrm platform data are not used anymore, remove them. Signed-off-by: Laurent Pinchart Reviewed-by: Tomi Valkeinen Signed-off-by: Tomi Valkeinen --- include/linux/platform_data/omap_drm.h | 53 ---------------------------------- 1 file changed, 53 deletions(-) delete mode 100644 include/linux/platform_data/omap_drm.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h deleted file mode 100644 index f4e4a237ebd2..000000000000 --- a/include/linux/platform_data/omap_drm.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * DRM/KMS platform data for TI OMAP platforms - * - * Copyright (C) 2012 Texas Instruments - * Author: Rob Clark - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see . - */ - -#ifndef __PLATFORM_DATA_OMAP_DRM_H__ -#define __PLATFORM_DATA_OMAP_DRM_H__ - -/* - * Optional platform data to configure the default configuration of which - * pipes/overlays/CRTCs are used.. if this is not provided, then instead the - * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to - * one manager, with priority given to managers that are connected to - * detected devices. Remaining overlays are used as video planes. This - * should be a good default behavior for most cases, but yet there still - * might be times when you wish to do something different. - */ -struct omap_kms_platform_data { - /* overlays to use as CRTCs: */ - int ovl_cnt; - const int *ovl_ids; - - /* overlays to use as video planes: */ - int pln_cnt; - const int *pln_ids; - - int mgr_cnt; - const int *mgr_ids; - - int dev_cnt; - const char **dev_names; -}; - -struct omap_drm_platform_data { - uint32_t omaprev; - struct omap_kms_platform_data *kms_pdata; -}; - -#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */ -- cgit v1.2.3-71-gd317