From e9a03add0c6ed5341fc59ff9c76843c2888a33fa Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 3 Sep 2013 16:28:59 +0800 Subject: pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang Signed-off-by: Linus Walleij --- include/linux/platform_data/pinctrl-adi2.h | 40 ++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 include/linux/platform_data/pinctrl-adi2.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h new file mode 100644 index 000000000000..8f91300617ec --- /dev/null +++ b/include/linux/platform_data/pinctrl-adi2.h @@ -0,0 +1,40 @@ +/* + * Pinctrl Driver for ADI GPIO2 controller + * + * Copyright 2007-2013 Analog Devices Inc. + * + * Licensed under the GPLv2 or later + */ + + +#ifndef PINCTRL_ADI2_H +#define PINCTRL_ADI2_H + +#include +#include + +/** + * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data + * for ADI GPIO2 device. + * + * @port_gpio_base: Optional global GPIO index of the GPIO bank. + * 0 means driver decides. + * @port_pin_base: Pin index of the pin controller device. + * @port_width: PIN number of the GPIO bank device + * @pint_id: GPIO PINT device id that this GPIO bank should map to. + * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A + * GPIO bank can be mapped into either low 16 bits[0] or high 16 + * bits[1] of each PINT register. + * @pint_map: GIOP bank mapping code in PINT device + */ +struct adi_pinctrl_gpio_platform_data { + unsigned int port_gpio_base; + unsigned int port_pin_base; + unsigned int port_width; + u8 pinctrl_id; + u8 pint_id; + bool pint_assign; + u8 pint_map; +}; + +#endif -- cgit v1.2.3-71-gd317