From 1e9d42194e4c8f0ba3f9d4f72b5f54050ddf7a39 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:07 +0200 Subject: i2c: gpio: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Tony Lindgren Acked-by: Lee Jones Acked-by: Robert Jarzmik Acked-by: Mauro Carvalho Chehab Acked-by: James Hogan Acked-by: Greg Ungerer --- include/linux/platform_data/i2c-gpio.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 include/linux/platform_data/i2c-gpio.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h new file mode 100644 index 000000000000..352c1426fd4d --- /dev/null +++ b/include/linux/platform_data/i2c-gpio.h @@ -0,0 +1,34 @@ +/* + * i2c-gpio interface to platform code + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _LINUX_I2C_GPIO_H +#define _LINUX_I2C_GPIO_H + +/** + * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio + * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz + * @timeout: clock stretching timeout in jiffies. If the slave keeps + * SCL low for longer than this, the transfer will time out. + * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin + * isn't actively driven high when setting the output value high. + * gpio_get_value() must return the actual pin state even if the + * pin is configured as an output. + * @scl_is_open_drain: SCL is set up as open drain. Same requirements + * as for sda_is_open_drain apply. + * @scl_is_output_only: SCL output drivers cannot be turned off. + */ +struct i2c_gpio_platform_data { + int udelay; + int timeout; + unsigned int sda_is_open_drain:1; + unsigned int scl_is_open_drain:1; + unsigned int scl_is_output_only:1; +}; + +#endif /* _LINUX_I2C_GPIO_H */ -- cgit v1.2.3-71-gd317 From 62ea22c4954f5b147488eefa644d668e843be6f7 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:08 +0200 Subject: i2c: mux: gpio: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Peter Korsgaard --- Documentation/i2c/muxes/i2c-mux-gpio | 4 +-- MAINTAINERS | 2 +- drivers/i2c/busses/i2c-i801.c | 2 +- drivers/i2c/muxes/i2c-mux-gpio.c | 2 +- include/linux/i2c-mux-gpio.h | 43 ------------------------------ include/linux/platform_data/i2c-mux-gpio.h | 43 ++++++++++++++++++++++++++++++ 6 files changed, 48 insertions(+), 48 deletions(-) delete mode 100644 include/linux/i2c-mux-gpio.h create mode 100644 include/linux/platform_data/i2c-mux-gpio.h (limited to 'include/linux/platform_data') diff --git a/Documentation/i2c/muxes/i2c-mux-gpio b/Documentation/i2c/muxes/i2c-mux-gpio index 7a8d7d261632..893ecdfe6e43 100644 --- a/Documentation/i2c/muxes/i2c-mux-gpio +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -30,12 +30,12 @@ i2c-mux-gpio uses the platform bus, so you need to provide a struct platform_device with the platform_data pointing to a struct i2c_mux_gpio_platform_data with the I2C adapter number of the master bus, the number of bus segments to create and the GPIO pins used -to control it. See include/linux/i2c-mux-gpio.h for details. +to control it. See include/linux/platform_data/i2c-mux-gpio.h for details. E.G. something like this for a MUX providing 4 bus segments controlled through 3 GPIO pins: -#include +#include #include static const unsigned myboard_gpiomux_gpios[] = { diff --git a/MAINTAINERS b/MAINTAINERS index 38760fcce99a..894f2bf9c9ba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5885,7 +5885,7 @@ M: Peter Korsgaard L: linux-i2c@vger.kernel.org S: Supported F: drivers/i2c/muxes/i2c-mux-gpio.c -F: include/linux/i2c-mux-gpio.h +F: include/linux/platform_data/i2c-mux-gpio.h F: Documentation/i2c/muxes/i2c-mux-gpio GENERIC HDLC (WAN) DRIVERS diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index e0d59e9ff3c6..bff160d1ce3f 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -106,7 +106,7 @@ #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI #include -#include +#include #endif /* I801 SMBus address offsets */ diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 1a9973ede443..15a7cc0459fb 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -10,7 +10,7 @@ #include #include -#include +#include #include #include #include diff --git a/include/linux/i2c-mux-gpio.h b/include/linux/i2c-mux-gpio.h deleted file mode 100644 index 4406108201fe..000000000000 --- a/include/linux/i2c-mux-gpio.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * i2c-mux-gpio interface to platform code - * - * Peter Korsgaard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _LINUX_I2C_MUX_GPIO_H -#define _LINUX_I2C_MUX_GPIO_H - -/* MUX has no specific idle mode */ -#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1) - -/** - * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio - * @parent: Parent I2C bus adapter number - * @base_nr: Base I2C bus number to number adapters from or zero for dynamic - * @values: Array of bitmasks of GPIO settings (low/high) for each - * position - * @n_values: Number of multiplexer positions (busses to instantiate) - * @classes: Optional I2C auto-detection classes - * @gpio_chip: Optional GPIO chip name; if set, GPIO pin numbers are given - * relative to the base GPIO number of that chip - * @gpios: Array of GPIO numbers used to control MUX - * @n_gpios: Number of GPIOs used to control MUX - * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used - */ -struct i2c_mux_gpio_platform_data { - int parent; - int base_nr; - const unsigned *values; - int n_values; - const unsigned *classes; - char *gpio_chip; - const unsigned *gpios; - int n_gpios; - unsigned idle; -}; - -#endif /* _LINUX_I2C_MUX_GPIO_H */ diff --git a/include/linux/platform_data/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h new file mode 100644 index 000000000000..4406108201fe --- /dev/null +++ b/include/linux/platform_data/i2c-mux-gpio.h @@ -0,0 +1,43 @@ +/* + * i2c-mux-gpio interface to platform code + * + * Peter Korsgaard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_I2C_MUX_GPIO_H +#define _LINUX_I2C_MUX_GPIO_H + +/* MUX has no specific idle mode */ +#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1) + +/** + * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio + * @parent: Parent I2C bus adapter number + * @base_nr: Base I2C bus number to number adapters from or zero for dynamic + * @values: Array of bitmasks of GPIO settings (low/high) for each + * position + * @n_values: Number of multiplexer positions (busses to instantiate) + * @classes: Optional I2C auto-detection classes + * @gpio_chip: Optional GPIO chip name; if set, GPIO pin numbers are given + * relative to the base GPIO number of that chip + * @gpios: Array of GPIO numbers used to control MUX + * @n_gpios: Number of GPIOs used to control MUX + * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used + */ +struct i2c_mux_gpio_platform_data { + int parent; + int base_nr; + const unsigned *values; + int n_values; + const unsigned *classes; + char *gpio_chip; + const unsigned *gpios; + int n_gpios; + unsigned idle; +}; + +#endif /* _LINUX_I2C_MUX_GPIO_H */ -- cgit v1.2.3-71-gd317 From 985ecf00375bde7d80be03a749f5b94d5ba77ac8 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:09 +0200 Subject: i2c: ocores: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Lee Jones --- Documentation/i2c/busses/i2c-ocores | 2 +- drivers/i2c/busses/i2c-ocores.c | 2 +- drivers/mfd/timberdale.c | 2 +- include/linux/i2c-ocores.h | 23 ----------------------- include/linux/platform_data/i2c-ocores.h | 23 +++++++++++++++++++++++ 5 files changed, 26 insertions(+), 26 deletions(-) delete mode 100644 include/linux/i2c-ocores.h create mode 100644 include/linux/platform_data/i2c-ocores.h (limited to 'include/linux/platform_data') diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores index c269aaa2f26a..c12fa9d3b050 100644 --- a/Documentation/i2c/busses/i2c-ocores +++ b/Documentation/i2c/busses/i2c-ocores @@ -18,7 +18,7 @@ Usage i2c-ocores uses the platform bus, so you need to provide a struct platform_device with the base address and interrupt number. The dev.platform_data of the device should also point to a struct -ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the +ocores_i2c_platform_data (see linux/platform_data/i2c-ocores.h) describing the distance between registers and the input clock speed. There is also a possibility to attach a list of i2c_board_info which the i2c-ocores driver will add to the bus upon creation. diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 8c42ca7107b2..d7da9adf7ee1 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index cd4a6d7d6750..118d7ef727e6 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h deleted file mode 100644 index 01edd96fe1f7..000000000000 --- a/include/linux/i2c-ocores.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * i2c-ocores.h - definitions for the i2c-ocores interface - * - * Peter Korsgaard - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef _LINUX_I2C_OCORES_H -#define _LINUX_I2C_OCORES_H - -struct ocores_i2c_platform_data { - u32 reg_shift; /* register offset shift value */ - u32 reg_io_width; /* register io read/write width */ - u32 clock_khz; /* input clock in kHz */ - bool big_endian; /* registers are big endian */ - u8 num_devices; /* number of devices in the devices list */ - struct i2c_board_info const *devices; /* devices connected to the bus */ -}; - -#endif /* _LINUX_I2C_OCORES_H */ diff --git a/include/linux/platform_data/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h new file mode 100644 index 000000000000..01edd96fe1f7 --- /dev/null +++ b/include/linux/platform_data/i2c-ocores.h @@ -0,0 +1,23 @@ +/* + * i2c-ocores.h - definitions for the i2c-ocores interface + * + * Peter Korsgaard + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef _LINUX_I2C_OCORES_H +#define _LINUX_I2C_OCORES_H + +struct ocores_i2c_platform_data { + u32 reg_shift; /* register offset shift value */ + u32 reg_io_width; /* register io read/write width */ + u32 clock_khz; /* input clock in kHz */ + bool big_endian; /* registers are big endian */ + u8 num_devices; /* number of devices in the devices list */ + struct i2c_board_info const *devices; /* devices connected to the bus */ +}; + +#endif /* _LINUX_I2C_OCORES_H */ -- cgit v1.2.3-71-gd317 From 79fc540fd543f47e77e1c7d407f2c082872a4625 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:10 +0200 Subject: i2c: omap: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Tony Lindgren --- MAINTAINERS | 4 +-- arch/arm/mach-omap1/common.h | 2 +- arch/arm/mach-omap1/i2c.c | 2 +- arch/arm/mach-omap2/common.h | 2 +- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 +- drivers/i2c/busses/i2c-omap.c | 2 +- include/linux/i2c-omap.h | 39 ------------------------------ include/linux/platform_data/i2c-omap.h | 39 ++++++++++++++++++++++++++++++ 14 files changed, 52 insertions(+), 52 deletions(-) delete mode 100644 include/linux/i2c-omap.h create mode 100644 include/linux/platform_data/i2c-omap.h (limited to 'include/linux/platform_data') diff --git a/MAINTAINERS b/MAINTAINERS index 894f2bf9c9ba..e4a6c963bdcf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10245,7 +10245,7 @@ F: arch/arm/mach-omap1/ F: arch/arm/plat-omap/ F: arch/arm/configs/omap1_defconfig F: drivers/i2c/busses/i2c-omap.c -F: include/linux/i2c-omap.h +F: include/linux/platform_data/i2c-omap.h OMAP2+ SUPPORT M: Tony Lindgren @@ -10277,7 +10277,7 @@ F: drivers/regulator/tps65218-regulator.c F: drivers/regulator/tps65910-regulator.c F: drivers/regulator/twl-regulator.c F: drivers/regulator/twl6030-regulator.c -F: include/linux/i2c-omap.h +F: include/linux/platform_data/i2c-omap.h ONION OMEGA2+ BOARD M: Harvey Hunt diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index d83ff257eaa8..c6537d2c2859 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -27,7 +27,7 @@ #define __ARCH_ARM_MACH_OMAP1_COMMON_H #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 5bdf3c4190f9..9250f263ac51 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -20,7 +20,7 @@ */ #include -#include +#include #include #include "soc.h" diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index fbe0b78bf489..ed1a7e2f176a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index fe66cf247874..d684fac8f592 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -13,7 +13,7 @@ * XXX these should be marked initdata for multi-OMAP kernels */ -#include +#include #include #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 74eefd30518c..abef9f6f9bf5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -13,7 +13,7 @@ * XXX these should be marked initdata for multi-OMAP kernels */ -#include +#include #include #include diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 53e1ac3724f2..c9483bc06228 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -14,7 +14,7 @@ * GNU General Public License for more details. */ -#include +#include #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 23336b6c7125..9c0953de24da 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -15,7 +15,7 @@ * XXX these should be marked initdata for multi-OMAP kernels */ -#include +#include #include #include diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index e4f8ae9cd637..9e4b4243fec7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index c72cd84b07ec..890c789485d3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 62352d1e6361..56b141fce973 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index b9172f08fd05..65d06a819307 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h deleted file mode 100644 index 3444265ee8ee..000000000000 --- a/include/linux/i2c-omap.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __I2C_OMAP_H__ -#define __I2C_OMAP_H__ - -#include - -/* - * Version 2 of the I2C peripheral unit has a different register - * layout and extra registers. The ID register in the V2 peripheral - * unit on the OMAP4430 reports the same ID as the V1 peripheral - * unit on the OMAP3530, so we must inform the driver which IP - * version we know it is running on from platform / cpu-specific - * code using these constants in the hwmod class definition. - */ - -#define OMAP_I2C_IP_VERSION_1 1 -#define OMAP_I2C_IP_VERSION_2 2 - -/* struct omap_i2c_bus_platform_data .flags meanings */ - -#define OMAP_I2C_FLAG_NO_FIFO BIT(0) -#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1) -#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2) -#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5) -#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6) -/* how the CPU address bus must be translated for I2C unit access */ -#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0 -#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7) -#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8) -#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7 - -struct omap_i2c_bus_platform_data { - u32 clkrate; - u32 rev; - u32 flags; - void (*set_mpu_wkup_lat)(struct device *dev, long set); -}; - -#endif diff --git a/include/linux/platform_data/i2c-omap.h b/include/linux/platform_data/i2c-omap.h new file mode 100644 index 000000000000..3444265ee8ee --- /dev/null +++ b/include/linux/platform_data/i2c-omap.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __I2C_OMAP_H__ +#define __I2C_OMAP_H__ + +#include + +/* + * Version 2 of the I2C peripheral unit has a different register + * layout and extra registers. The ID register in the V2 peripheral + * unit on the OMAP4430 reports the same ID as the V1 peripheral + * unit on the OMAP3530, so we must inform the driver which IP + * version we know it is running on from platform / cpu-specific + * code using these constants in the hwmod class definition. + */ + +#define OMAP_I2C_IP_VERSION_1 1 +#define OMAP_I2C_IP_VERSION_2 2 + +/* struct omap_i2c_bus_platform_data .flags meanings */ + +#define OMAP_I2C_FLAG_NO_FIFO BIT(0) +#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1) +#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2) +#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5) +#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6) +/* how the CPU address bus must be translated for I2C unit access */ +#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0 +#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7) +#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8) +#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7 + +struct omap_i2c_bus_platform_data { + u32 clkrate; + u32 rev; + u32 flags; + void (*set_mpu_wkup_lat)(struct device *dev, long set); +}; + +#endif -- cgit v1.2.3-71-gd317 From e5c7137793a754500e65ffd7477e88ff7a06ac53 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:11 +0200 Subject: i2c: pca-platform: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang --- arch/sh/boards/board-sh7785lcr.c | 2 +- drivers/i2c/busses/i2c-pca-platform.c | 2 +- include/linux/i2c-pca-platform.h | 10 ---------- include/linux/platform_data/i2c-pca-platform.h | 10 ++++++++++ 4 files changed, 12 insertions(+), 12 deletions(-) delete mode 100644 include/linux/i2c-pca-platform.h create mode 100644 include/linux/platform_data/i2c-pca-platform.h (limited to 'include/linux/platform_data') diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index d7d232dea33e..3cba60ff7aab 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index bc2707ffd409..de3fe6e828cb 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/include/linux/i2c-pca-platform.h b/include/linux/i2c-pca-platform.h deleted file mode 100644 index c37329432a8e..000000000000 --- a/include/linux/i2c-pca-platform.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef I2C_PCA9564_PLATFORM_H -#define I2C_PCA9564_PLATFORM_H - -struct i2c_pca9564_pf_platform_data { - int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */ - int timeout; /* timeout in jiffies */ -}; - -#endif /* I2C_PCA9564_PLATFORM_H */ diff --git a/include/linux/platform_data/i2c-pca-platform.h b/include/linux/platform_data/i2c-pca-platform.h new file mode 100644 index 000000000000..c37329432a8e --- /dev/null +++ b/include/linux/platform_data/i2c-pca-platform.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef I2C_PCA9564_PLATFORM_H +#define I2C_PCA9564_PLATFORM_H + +struct i2c_pca9564_pf_platform_data { + int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */ + int timeout; /* timeout in jiffies */ +}; + +#endif /* I2C_PCA9564_PLATFORM_H */ -- cgit v1.2.3-71-gd317 From 7072b75c15271cef07792f659eaf0cc7160f6442 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:12 +0200 Subject: i2c: xiic: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Lee Jones --- drivers/i2c/busses/i2c-xiic.c | 2 +- drivers/mfd/timberdale.c | 2 +- include/linux/i2c-xiic.h | 43 ---------------------------------- include/linux/platform_data/i2c-xiic.h | 43 ++++++++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+), 45 deletions(-) delete mode 100644 include/linux/i2c-xiic.h create mode 100644 include/linux/platform_data/i2c-xiic.h (limited to 'include/linux/platform_data') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index c80527816ad0..0ff36f6d7a57 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index 118d7ef727e6..33abf5a79f2b 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include diff --git a/include/linux/i2c-xiic.h b/include/linux/i2c-xiic.h deleted file mode 100644 index 4f9f2256a97e..000000000000 --- a/include/linux/i2c-xiic.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * i2c-xiic.h - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Xilinx IIC - */ - -#ifndef _LINUX_I2C_XIIC_H -#define _LINUX_I2C_XIIC_H - -/** - * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver - * @num_devices: Number of devices that shall be added when the driver - * is probed. - * @devices: The actuall devices to add. - * - * This purpose of this platform data struct is to be able to provide a number - * of devices that should be added to the I2C bus. The reason is that sometimes - * the I2C board info is not enough, a new PCI board can for instance be - * plugged into a standard PC, and the bus number might be unknown at - * early init time. - */ -struct xiic_i2c_platform_data { - u8 num_devices; - struct i2c_board_info const *devices; -}; - -#endif /* _LINUX_I2C_XIIC_H */ diff --git a/include/linux/platform_data/i2c-xiic.h b/include/linux/platform_data/i2c-xiic.h new file mode 100644 index 000000000000..4f9f2256a97e --- /dev/null +++ b/include/linux/platform_data/i2c-xiic.h @@ -0,0 +1,43 @@ +/* + * i2c-xiic.h + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Xilinx IIC + */ + +#ifndef _LINUX_I2C_XIIC_H +#define _LINUX_I2C_XIIC_H + +/** + * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver + * @num_devices: Number of devices that shall be added when the driver + * is probed. + * @devices: The actuall devices to add. + * + * This purpose of this platform data struct is to be able to provide a number + * of devices that should be added to the I2C bus. The reason is that sometimes + * the I2C board info is not enough, a new PCI board can for instance be + * plugged into a standard PC, and the bus number might be unknown at + * early init time. + */ +struct xiic_i2c_platform_data { + u8 num_devices; + struct i2c_board_info const *devices; +}; + +#endif /* _LINUX_I2C_XIIC_H */ -- cgit v1.2.3-71-gd317