From a288d648715bab6a1ab2b72cb1c1cc79cdc8cb43 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Fri, 23 May 2014 12:54:57 +0100 Subject: extcon: arizona: support inverted jack detect switch Add config option for inverted jack detect switch that opens when jack is inserted. Signed-off-by: Richard Fitzgerald [Acked by Lee Jones for MFD part] Acked-by: Lee Jones Signed-off-by: Chanwoo Choi --- include/linux/mfd/arizona/pdata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 12a5c135c746..4578c72c9b86 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -127,6 +127,9 @@ struct arizona_pdata { /** Internal pull on GPIO5 is disabled when used for jack detection */ bool jd_gpio5_nopull; + /** set to true if jackdet contact opens on insert */ + bool jd_invert; + /** Use the headphone detect circuit to identify the accessory */ bool hpdet_acc_id; -- cgit v1.2.3-71-gd317 From d0540f91cf74fab90e1143d8d40da8a5b5fabc8a Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Wed, 21 May 2014 08:52:47 +0200 Subject: mfd: max77693: Remove unnecessary wrapper functions This patch removes wrapper functions used to access regmap, and make driver using regmap_*() functions instead. Signed-off-by: Robert Baldyga Reviewed-by: Krzysztof Kozlowski Acked-by: Mark Brown Acked-by: Chanwoo Choi Signed-off-by: Lee Jones --- drivers/extcon/extcon-max77693.c | 32 ++++++++++----------- drivers/mfd/max77693-irq.c | 50 +++++++++++++++++++------------- drivers/mfd/max77693.c | 56 ++---------------------------------- drivers/regulator/max77693.c | 12 ++++---- include/linux/mfd/max77693-private.h | 8 ------ 5 files changed, 54 insertions(+), 104 deletions(-) (limited to 'include/linux') diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 2c7c3e191591..ba84a6e77e03 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -255,10 +255,10 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, case ADC_DEBOUNCE_TIME_10MS: case ADC_DEBOUNCE_TIME_25MS: case ADC_DEBOUNCE_TIME_38_62MS: - ret = max77693_update_reg(info->max77693->regmap_muic, + ret = regmap_update_bits(info->max77693->regmap_muic, MAX77693_MUIC_REG_CTRL3, - time << CONTROL3_ADCDBSET_SHIFT, - CONTROL3_ADCDBSET_MASK); + CONTROL3_ADCDBSET_MASK, + time << CONTROL3_ADCDBSET_SHIFT); if (ret) { dev_err(info->dev, "failed to set ADC debounce time\n"); return ret; @@ -286,15 +286,15 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, u8 val, bool attached) { int ret = 0; - u8 ctrl1, ctrl2 = 0; + unsigned int ctrl1, ctrl2 = 0; if (attached) ctrl1 = val; else ctrl1 = CONTROL1_SW_OPEN; - ret = max77693_update_reg(info->max77693->regmap_muic, - MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK); + ret = regmap_update_bits(info->max77693->regmap_muic, + MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); return ret; @@ -305,9 +305,9 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, else ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ - ret = max77693_update_reg(info->max77693->regmap_muic, - MAX77693_MUIC_REG_CTRL2, ctrl2, - CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); + ret = regmap_update_bits(info->max77693->regmap_muic, + MAX77693_MUIC_REG_CTRL2, + CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); return ret; @@ -969,8 +969,8 @@ static void max77693_muic_irq_work(struct work_struct *work) if (info->irq == muic_irqs[i].virq) irq_type = muic_irqs[i].irq; - ret = max77693_bulk_read(info->max77693->regmap_muic, - MAX77693_MUIC_REG_STATUS1, 2, info->status); + ret = regmap_bulk_read(info->max77693->regmap_muic, + MAX77693_MUIC_REG_STATUS1, info->status, 2); if (ret) { dev_err(info->dev, "failed to read MUIC register\n"); mutex_unlock(&info->mutex); @@ -1042,8 +1042,8 @@ static int max77693_muic_detect_accessory(struct max77693_muic_info *info) mutex_lock(&info->mutex); /* Read STATUSx register to detect accessory */ - ret = max77693_bulk_read(info->max77693->regmap_muic, - MAX77693_MUIC_REG_STATUS1, 2, info->status); + ret = regmap_bulk_read(info->max77693->regmap_muic, + MAX77693_MUIC_REG_STATUS1, info->status, 2); if (ret) { dev_err(info->dev, "failed to read MUIC register\n"); mutex_unlock(&info->mutex); @@ -1095,7 +1095,7 @@ static int max77693_muic_probe(struct platform_device *pdev) int delay_jiffies; int ret; int i; - u8 id; + unsigned int id; info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info), GFP_KERNEL); @@ -1204,7 +1204,7 @@ static int max77693_muic_probe(struct platform_device *pdev) enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR; - max77693_write_reg(info->max77693->regmap_muic, + regmap_write(info->max77693->regmap_muic, init_data[i].addr, init_data[i].data); @@ -1262,7 +1262,7 @@ static int max77693_muic_probe(struct platform_device *pdev) max77693_muic_set_path(info, info->path_uart, true); /* Check revision number of MUIC device*/ - ret = max77693_read_reg(info->max77693->regmap_muic, + ret = regmap_read(info->max77693->regmap_muic, MAX77693_MUIC_REG_ID, &id); if (ret < 0) { dev_err(&pdev->dev, "failed to read revision number\n"); diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c index 66b58fe77094..7d8f99f94f27 100644 --- a/drivers/mfd/max77693-irq.c +++ b/drivers/mfd/max77693-irq.c @@ -30,8 +30,9 @@ #include #include #include +#include -static const u8 max77693_mask_reg[] = { +static const unsigned int max77693_mask_reg[] = { [LED_INT] = MAX77693_LED_REG_FLASH_INT_MASK, [TOPSYS_INT] = MAX77693_PMIC_REG_TOPSYS_INT_MASK, [CHG_INT] = MAX77693_CHG_REG_CHG_INT_MASK, @@ -118,7 +119,7 @@ static void max77693_irq_sync_unlock(struct irq_data *data) continue; max77693->irq_masks_cache[i] = max77693->irq_masks_cur[i]; - max77693_write_reg(map, max77693_mask_reg[i], + regmap_write(map, max77693_mask_reg[i], max77693->irq_masks_cur[i]); } @@ -178,11 +179,11 @@ static irqreturn_t max77693_irq_thread(int irq, void *data) { struct max77693_dev *max77693 = data; u8 irq_reg[MAX77693_IRQ_GROUP_NR] = {}; - u8 irq_src; + unsigned int irq_src; int ret; int i, cur_irq; - ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_INTSRC, + ret = regmap_read(max77693->regmap, MAX77693_PMIC_REG_INTSRC, &irq_src); if (ret < 0) { dev_err(max77693->dev, "Failed to read interrupt source: %d\n", @@ -190,25 +191,34 @@ static irqreturn_t max77693_irq_thread(int irq, void *data) return IRQ_NONE; } - if (irq_src & MAX77693_IRQSRC_CHG) + if (irq_src & MAX77693_IRQSRC_CHG) { /* CHG_INT */ - ret = max77693_read_reg(max77693->regmap, MAX77693_CHG_REG_CHG_INT, - &irq_reg[CHG_INT]); + unsigned int data; + ret = regmap_read(max77693->regmap, + MAX77693_CHG_REG_CHG_INT, &data); + irq_reg[CHG_INT] = data; + } - if (irq_src & MAX77693_IRQSRC_TOP) + if (irq_src & MAX77693_IRQSRC_TOP) { /* TOPSYS_INT */ - ret = max77693_read_reg(max77693->regmap, - MAX77693_PMIC_REG_TOPSYS_INT, &irq_reg[TOPSYS_INT]); + unsigned int data; + ret = regmap_read(max77693->regmap, + MAX77693_PMIC_REG_TOPSYS_INT, &data); + irq_reg[TOPSYS_INT] = data; + } - if (irq_src & MAX77693_IRQSRC_FLASH) + if (irq_src & MAX77693_IRQSRC_FLASH) { /* LED_INT */ - ret = max77693_read_reg(max77693->regmap, - MAX77693_LED_REG_FLASH_INT, &irq_reg[LED_INT]); + unsigned int data; + ret = regmap_read(max77693->regmap, + MAX77693_LED_REG_FLASH_INT, &data); + irq_reg[LED_INT] = data; + } if (irq_src & MAX77693_IRQSRC_MUIC) /* MUIC INT1 ~ INT3 */ - max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1, - MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]); + regmap_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1, + &irq_reg[MUIC_INT1], MAX77693_NUM_IRQ_MUIC_REGS); /* Apply masking */ for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) { @@ -263,7 +273,7 @@ int max77693_irq_init(struct max77693_dev *max77693) struct irq_domain *domain; int i; int ret = 0; - u8 intsrc_mask; + unsigned int intsrc_mask; mutex_init(&max77693->irqlock); @@ -286,9 +296,9 @@ int max77693_irq_init(struct max77693_dev *max77693) if (max77693_mask_reg[i] == MAX77693_REG_INVALID) continue; if (i >= MUIC_INT1 && i <= MUIC_INT3) - max77693_write_reg(map, max77693_mask_reg[i], 0x00); + regmap_write(map, max77693_mask_reg[i], 0x00); else - max77693_write_reg(map, max77693_mask_reg[i], 0xff); + regmap_write(map, max77693_mask_reg[i], 0xff); } domain = irq_domain_add_linear(NULL, MAX77693_IRQ_NR, @@ -301,7 +311,7 @@ int max77693_irq_init(struct max77693_dev *max77693) max77693->irq_domain = domain; /* Unmask max77693 interrupt */ - ret = max77693_read_reg(max77693->regmap, + ret = regmap_read(max77693->regmap, MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask); if (ret < 0) { dev_err(max77693->dev, "fail to read PMIC register\n"); @@ -311,7 +321,7 @@ int max77693_irq_init(struct max77693_dev *max77693) intsrc_mask &= ~(MAX77693_IRQSRC_CHG); intsrc_mask &= ~(MAX77693_IRQSRC_FLASH); intsrc_mask &= ~(MAX77693_IRQSRC_MUIC); - ret = max77693_write_reg(max77693->regmap, + ret = regmap_write(max77693->regmap, MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask); if (ret < 0) { dev_err(max77693->dev, "fail to write PMIC register\n"); diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 7e05428c756d..a0308336adaf 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -49,58 +49,6 @@ static const struct mfd_cell max77693_devs[] = { { .name = "max77693-haptic", }, }; -int max77693_read_reg(struct regmap *map, u8 reg, u8 *dest) -{ - unsigned int val; - int ret; - - ret = regmap_read(map, reg, &val); - *dest = val; - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_read_reg); - -int max77693_bulk_read(struct regmap *map, u8 reg, int count, u8 *buf) -{ - int ret; - - ret = regmap_bulk_read(map, reg, buf, count); - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_bulk_read); - -int max77693_write_reg(struct regmap *map, u8 reg, u8 value) -{ - int ret; - - ret = regmap_write(map, reg, value); - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_write_reg); - -int max77693_bulk_write(struct regmap *map, u8 reg, int count, u8 *buf) -{ - int ret; - - ret = regmap_bulk_write(map, reg, buf, count); - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_bulk_write); - -int max77693_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask) -{ - int ret; - - ret = regmap_update_bits(map, reg, mask, val); - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_update_reg); - static const struct regmap_config max77693_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -117,7 +65,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct max77693_dev *max77693; - u8 reg_data; + unsigned int reg_data; int ret = 0; max77693 = devm_kzalloc(&i2c->dev, @@ -139,7 +87,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, return ret; } - ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2, + ret = regmap_read(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2, ®_data); if (ret < 0) { dev_err(max77693->dev, "device not found on this channel\n"); diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c index 653a58b49cdf..c67ff05fc1dd 100644 --- a/drivers/regulator/max77693.c +++ b/drivers/regulator/max77693.c @@ -31,6 +31,7 @@ #include #include #include +#include #define CHGIN_ILIM_STEP_20mA 20000 @@ -39,9 +40,9 @@ static int max77693_chg_is_enabled(struct regulator_dev *rdev) { int ret; - u8 val; + unsigned int val; - ret = max77693_read_reg(rdev->regmap, rdev->desc->enable_reg, &val); + ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); if (ret) return ret; @@ -57,12 +58,11 @@ static int max77693_chg_get_current_limit(struct regulator_dev *rdev) { unsigned int chg_min_uA = rdev->constraints->min_uA; unsigned int chg_max_uA = rdev->constraints->max_uA; - u8 reg, sel; + unsigned int reg, sel; unsigned int val; int ret; - ret = max77693_read_reg(rdev->regmap, - MAX77693_CHG_REG_CHG_CNFG_09, ®); + ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, ®); if (ret < 0) return ret; @@ -96,7 +96,7 @@ static int max77693_chg_set_current_limit(struct regulator_dev *rdev, /* the first four codes for charger current are all 60mA */ sel += 3; - return max77693_write_reg(rdev->regmap, + return regmap_write(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, sel); } /* end of CHARGER regulator ops */ diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 3e050b933dd0..80ec31d561c4 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -332,14 +332,6 @@ enum max77693_types { TYPE_MAX77693, }; -extern int max77693_read_reg(struct regmap *map, u8 reg, u8 *dest); -extern int max77693_bulk_read(struct regmap *map, u8 reg, int count, - u8 *buf); -extern int max77693_write_reg(struct regmap *map, u8 reg, u8 value); -extern int max77693_bulk_write(struct regmap *map, u8 reg, int count, - u8 *buf); -extern int max77693_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask); - extern int max77693_irq_init(struct max77693_dev *max77686); extern void max77693_irq_exit(struct max77693_dev *max77686); extern int max77693_irq_resume(struct max77693_dev *max77686); -- cgit v1.2.3-71-gd317 From 342d669c1ee421323f552a62729d3a3d0065093c Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Wed, 21 May 2014 08:52:48 +0200 Subject: mfd: max77693: Handle IRQs using regmap This patch modifies mfd driver to use regmap for handling interrupts. It allows to simplify irq handling process. This modifications needed to make small changes in function drivers, which use interrupts. Signed-off-by: Robert Baldyga Reviewed-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Signed-off-by: Lee Jones --- drivers/extcon/extcon-max77693.c | 3 +- drivers/mfd/Kconfig | 1 + drivers/mfd/Makefile | 2 +- drivers/mfd/max77693-irq.c | 346 ----------------------------------- drivers/mfd/max77693.c | 158 ++++++++++++++-- include/linux/mfd/max77693-private.h | 46 ++++- 6 files changed, 195 insertions(+), 361 deletions(-) delete mode 100644 drivers/mfd/max77693-irq.c (limited to 'include/linux') diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index ba84a6e77e03..c7278b1649da 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -1154,7 +1154,8 @@ static int max77693_muic_probe(struct platform_device *pdev) struct max77693_muic_irq *muic_irq = &muic_irqs[i]; unsigned int virq = 0; - virq = irq_create_mapping(max77693->irq_domain, muic_irq->irq); + virq = regmap_irq_get_virq(max77693->irq_data_muic, + muic_irq->irq); if (!virq) { ret = -EINVAL; goto err_irq; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ee8204cc31e9..2feac14d1085 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -384,6 +384,7 @@ config MFD_MAX77693 depends on I2C=y select MFD_CORE select REGMAP_I2C + select REGMAP_IRQ help Say yes here to add support for Maxim Semiconductor MAX77693. This is a companion Power Management IC with Flash, Haptic, Charger, diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8afedba535c7..8c6e7bba4660 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -116,7 +116,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77686) += max77686.o max77686-irq.o -obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o +obj-$(CONFIG_MFD_MAX77693) += max77693.o obj-$(CONFIG_MFD_MAX8907) += max8907.o max8925-objs := max8925-core.o max8925-i2c.o obj-$(CONFIG_MFD_MAX8925) += max8925.o diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c deleted file mode 100644 index 7d8f99f94f27..000000000000 --- a/drivers/mfd/max77693-irq.c +++ /dev/null @@ -1,346 +0,0 @@ -/* - * max77693-irq.c - Interrupt controller support for MAX77693 - * - * Copyright (C) 2012 Samsung Electronics Co.Ltd - * SangYoung Son - * - * This program is not provided / owned by Maxim Integrated Products. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This driver is based on max8997-irq.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static const unsigned int max77693_mask_reg[] = { - [LED_INT] = MAX77693_LED_REG_FLASH_INT_MASK, - [TOPSYS_INT] = MAX77693_PMIC_REG_TOPSYS_INT_MASK, - [CHG_INT] = MAX77693_CHG_REG_CHG_INT_MASK, - [MUIC_INT1] = MAX77693_MUIC_REG_INTMASK1, - [MUIC_INT2] = MAX77693_MUIC_REG_INTMASK2, - [MUIC_INT3] = MAX77693_MUIC_REG_INTMASK3, -}; - -static struct regmap *max77693_get_regmap(struct max77693_dev *max77693, - enum max77693_irq_source src) -{ - switch (src) { - case LED_INT ... CHG_INT: - return max77693->regmap; - case MUIC_INT1 ... MUIC_INT3: - return max77693->regmap_muic; - default: - return ERR_PTR(-EINVAL); - } -} - -struct max77693_irq_data { - int mask; - enum max77693_irq_source group; -}; - -#define DECLARE_IRQ(idx, _group, _mask) \ - [(idx)] = { .group = (_group), .mask = (_mask) } -static const struct max77693_irq_data max77693_irqs[] = { - DECLARE_IRQ(MAX77693_LED_IRQ_FLED2_OPEN, LED_INT, 1 << 0), - DECLARE_IRQ(MAX77693_LED_IRQ_FLED2_SHORT, LED_INT, 1 << 1), - DECLARE_IRQ(MAX77693_LED_IRQ_FLED1_OPEN, LED_INT, 1 << 2), - DECLARE_IRQ(MAX77693_LED_IRQ_FLED1_SHORT, LED_INT, 1 << 3), - DECLARE_IRQ(MAX77693_LED_IRQ_MAX_FLASH, LED_INT, 1 << 4), - - DECLARE_IRQ(MAX77693_TOPSYS_IRQ_T120C_INT, TOPSYS_INT, 1 << 0), - DECLARE_IRQ(MAX77693_TOPSYS_IRQ_T140C_INT, TOPSYS_INT, 1 << 1), - DECLARE_IRQ(MAX77693_TOPSYS_IRQ_LOWSYS_INT, TOPSYS_INT, 1 << 3), - - DECLARE_IRQ(MAX77693_CHG_IRQ_BYP_I, CHG_INT, 1 << 0), - DECLARE_IRQ(MAX77693_CHG_IRQ_THM_I, CHG_INT, 1 << 2), - DECLARE_IRQ(MAX77693_CHG_IRQ_BAT_I, CHG_INT, 1 << 3), - DECLARE_IRQ(MAX77693_CHG_IRQ_CHG_I, CHG_INT, 1 << 4), - DECLARE_IRQ(MAX77693_CHG_IRQ_CHGIN_I, CHG_INT, 1 << 6), - - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC, MUIC_INT1, 1 << 0), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC_LOW, MUIC_INT1, 1 << 1), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC_ERR, MUIC_INT1, 1 << 2), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC1K, MUIC_INT1, 1 << 3), - - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_CHGTYP, MUIC_INT2, 1 << 0), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_CHGDETREUN, MUIC_INT2, 1 << 1), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_DCDTMR, MUIC_INT2, 1 << 2), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_DXOVP, MUIC_INT2, 1 << 3), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_VBVOLT, MUIC_INT2, 1 << 4), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_VIDRM, MUIC_INT2, 1 << 5), - - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_EOC, MUIC_INT3, 1 << 0), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_CGMBC, MUIC_INT3, 1 << 1), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_OVP, MUIC_INT3, 1 << 2), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR, MUIC_INT3, 1 << 3), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, MUIC_INT3, 1 << 4), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_BAT_DET, MUIC_INT3, 1 << 5), -}; - -static void max77693_irq_lock(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - - mutex_lock(&max77693->irqlock); -} - -static void max77693_irq_sync_unlock(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - int i; - - for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) { - u8 mask_reg = max77693_mask_reg[i]; - struct regmap *map = max77693_get_regmap(max77693, i); - - if (mask_reg == MAX77693_REG_INVALID || - IS_ERR_OR_NULL(map)) - continue; - max77693->irq_masks_cache[i] = max77693->irq_masks_cur[i]; - - regmap_write(map, max77693_mask_reg[i], - max77693->irq_masks_cur[i]); - } - - mutex_unlock(&max77693->irqlock); -} - -static const inline struct max77693_irq_data * -irq_to_max77693_irq(struct max77693_dev *max77693, int irq) -{ - struct irq_data *data = irq_get_irq_data(irq); - return &max77693_irqs[data->hwirq]; -} - -static void max77693_irq_mask(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - const struct max77693_irq_data *irq_data = - irq_to_max77693_irq(max77693, data->irq); - - if (irq_data->group >= MAX77693_IRQ_GROUP_NR) - return; - - if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) - max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask; - else - max77693->irq_masks_cur[irq_data->group] |= irq_data->mask; -} - -static void max77693_irq_unmask(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - const struct max77693_irq_data *irq_data = - irq_to_max77693_irq(max77693, data->irq); - - if (irq_data->group >= MAX77693_IRQ_GROUP_NR) - return; - - if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) - max77693->irq_masks_cur[irq_data->group] |= irq_data->mask; - else - max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask; -} - -static struct irq_chip max77693_irq_chip = { - .name = "max77693", - .irq_bus_lock = max77693_irq_lock, - .irq_bus_sync_unlock = max77693_irq_sync_unlock, - .irq_mask = max77693_irq_mask, - .irq_unmask = max77693_irq_unmask, -}; - -#define MAX77693_IRQSRC_CHG (1 << 0) -#define MAX77693_IRQSRC_TOP (1 << 1) -#define MAX77693_IRQSRC_FLASH (1 << 2) -#define MAX77693_IRQSRC_MUIC (1 << 3) -static irqreturn_t max77693_irq_thread(int irq, void *data) -{ - struct max77693_dev *max77693 = data; - u8 irq_reg[MAX77693_IRQ_GROUP_NR] = {}; - unsigned int irq_src; - int ret; - int i, cur_irq; - - ret = regmap_read(max77693->regmap, MAX77693_PMIC_REG_INTSRC, - &irq_src); - if (ret < 0) { - dev_err(max77693->dev, "Failed to read interrupt source: %d\n", - ret); - return IRQ_NONE; - } - - if (irq_src & MAX77693_IRQSRC_CHG) { - /* CHG_INT */ - unsigned int data; - ret = regmap_read(max77693->regmap, - MAX77693_CHG_REG_CHG_INT, &data); - irq_reg[CHG_INT] = data; - } - - if (irq_src & MAX77693_IRQSRC_TOP) { - /* TOPSYS_INT */ - unsigned int data; - ret = regmap_read(max77693->regmap, - MAX77693_PMIC_REG_TOPSYS_INT, &data); - irq_reg[TOPSYS_INT] = data; - } - - if (irq_src & MAX77693_IRQSRC_FLASH) { - /* LED_INT */ - unsigned int data; - ret = regmap_read(max77693->regmap, - MAX77693_LED_REG_FLASH_INT, &data); - irq_reg[LED_INT] = data; - } - - if (irq_src & MAX77693_IRQSRC_MUIC) - /* MUIC INT1 ~ INT3 */ - regmap_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1, - &irq_reg[MUIC_INT1], MAX77693_NUM_IRQ_MUIC_REGS); - - /* Apply masking */ - for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) { - if (i >= MUIC_INT1 && i <= MUIC_INT3) - irq_reg[i] &= max77693->irq_masks_cur[i]; - else - irq_reg[i] &= ~max77693->irq_masks_cur[i]; - } - - /* Report */ - for (i = 0; i < MAX77693_IRQ_NR; i++) { - if (irq_reg[max77693_irqs[i].group] & max77693_irqs[i].mask) { - cur_irq = irq_find_mapping(max77693->irq_domain, i); - if (cur_irq) - handle_nested_irq(cur_irq); - } - } - - return IRQ_HANDLED; -} - -int max77693_irq_resume(struct max77693_dev *max77693) -{ - if (max77693->irq) - max77693_irq_thread(0, max77693); - - return 0; -} - -static int max77693_irq_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - struct max77693_dev *max77693 = d->host_data; - - irq_set_chip_data(irq, max77693); - irq_set_chip_and_handler(irq, &max77693_irq_chip, handle_edge_irq); - irq_set_nested_thread(irq, 1); -#ifdef CONFIG_ARM - set_irq_flags(irq, IRQF_VALID); -#else - irq_set_noprobe(irq); -#endif - return 0; -} - -static struct irq_domain_ops max77693_irq_domain_ops = { - .map = max77693_irq_domain_map, -}; - -int max77693_irq_init(struct max77693_dev *max77693) -{ - struct irq_domain *domain; - int i; - int ret = 0; - unsigned int intsrc_mask; - - mutex_init(&max77693->irqlock); - - /* Mask individual interrupt sources */ - for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) { - struct regmap *map; - /* MUIC IRQ 0:MASK 1:NOT MASK */ - /* Other IRQ 1:MASK 0:NOT MASK */ - if (i >= MUIC_INT1 && i <= MUIC_INT3) { - max77693->irq_masks_cur[i] = 0x00; - max77693->irq_masks_cache[i] = 0x00; - } else { - max77693->irq_masks_cur[i] = 0xff; - max77693->irq_masks_cache[i] = 0xff; - } - map = max77693_get_regmap(max77693, i); - - if (IS_ERR_OR_NULL(map)) - continue; - if (max77693_mask_reg[i] == MAX77693_REG_INVALID) - continue; - if (i >= MUIC_INT1 && i <= MUIC_INT3) - regmap_write(map, max77693_mask_reg[i], 0x00); - else - regmap_write(map, max77693_mask_reg[i], 0xff); - } - - domain = irq_domain_add_linear(NULL, MAX77693_IRQ_NR, - &max77693_irq_domain_ops, max77693); - if (!domain) { - dev_err(max77693->dev, "could not create irq domain\n"); - ret = -ENODEV; - goto err_irq; - } - max77693->irq_domain = domain; - - /* Unmask max77693 interrupt */ - ret = regmap_read(max77693->regmap, - MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask); - if (ret < 0) { - dev_err(max77693->dev, "fail to read PMIC register\n"); - goto err_irq; - } - - intsrc_mask &= ~(MAX77693_IRQSRC_CHG); - intsrc_mask &= ~(MAX77693_IRQSRC_FLASH); - intsrc_mask &= ~(MAX77693_IRQSRC_MUIC); - ret = regmap_write(max77693->regmap, - MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask); - if (ret < 0) { - dev_err(max77693->dev, "fail to write PMIC register\n"); - goto err_irq; - } - - ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "max77693-irq", max77693); - if (ret) - dev_err(max77693->dev, "Failed to request IRQ %d: %d\n", - max77693->irq, ret); - -err_irq: - return ret; -} - -void max77693_irq_exit(struct max77693_dev *max77693) -{ - if (max77693->irq) - free_irq(max77693->irq, max77693); -} diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index a0308336adaf..249c139ef04a 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -55,12 +55,95 @@ static const struct regmap_config max77693_regmap_config = { .max_register = MAX77693_PMIC_REG_END, }; +static const struct regmap_irq max77693_led_irqs[] = { + { .mask = LED_IRQ_FLED2_OPEN, }, + { .mask = LED_IRQ_FLED2_SHORT, }, + { .mask = LED_IRQ_FLED1_OPEN, }, + { .mask = LED_IRQ_FLED1_SHORT, }, + { .mask = LED_IRQ_MAX_FLASH, }, +}; + +static const struct regmap_irq_chip max77693_led_irq_chip = { + .name = "max77693-led", + .status_base = MAX77693_LED_REG_FLASH_INT, + .mask_base = MAX77693_LED_REG_FLASH_INT_MASK, + .mask_invert = false, + .num_regs = 1, + .irqs = max77693_led_irqs, + .num_irqs = ARRAY_SIZE(max77693_led_irqs), +}; + +static const struct regmap_irq max77693_topsys_irqs[] = { + { .mask = TOPSYS_IRQ_T120C_INT, }, + { .mask = TOPSYS_IRQ_T140C_INT, }, + { .mask = TOPSYS_IRQ_LOWSYS_INT, }, +}; + +static const struct regmap_irq_chip max77693_topsys_irq_chip = { + .name = "max77693-topsys", + .status_base = MAX77693_PMIC_REG_TOPSYS_INT, + .mask_base = MAX77693_PMIC_REG_TOPSYS_INT_MASK, + .mask_invert = false, + .num_regs = 1, + .irqs = max77693_topsys_irqs, + .num_irqs = ARRAY_SIZE(max77693_topsys_irqs), +}; + +static const struct regmap_irq max77693_charger_irqs[] = { + { .mask = CHG_IRQ_BYP_I, }, + { .mask = CHG_IRQ_THM_I, }, + { .mask = CHG_IRQ_BAT_I, }, + { .mask = CHG_IRQ_CHG_I, }, + { .mask = CHG_IRQ_CHGIN_I, }, +}; + +static const struct regmap_irq_chip max77693_charger_irq_chip = { + .name = "max77693-charger", + .status_base = MAX77693_CHG_REG_CHG_INT, + .mask_base = MAX77693_CHG_REG_CHG_INT_MASK, + .mask_invert = false, + .num_regs = 1, + .irqs = max77693_charger_irqs, + .num_irqs = ARRAY_SIZE(max77693_charger_irqs), +}; + static const struct regmap_config max77693_regmap_muic_config = { .reg_bits = 8, .val_bits = 8, .max_register = MAX77693_MUIC_REG_END, }; +static const struct regmap_irq max77693_muic_irqs[] = { + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC, }, + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC_LOW, }, + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC_ERR, }, + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC1K, }, + + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_CHGTYP, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_CHGDETREUN, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_DCDTMR, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_DXOVP, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_VBVOLT, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_VIDRM, }, + + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_EOC, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_CGMBC, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_OVP, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_MBCCHG_ERR, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_CHG_ENABLED, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_BAT_DET, }, +}; + +static const struct regmap_irq_chip max77693_muic_irq_chip = { + .name = "max77693-muic", + .status_base = MAX77693_MUIC_REG_INT1, + .mask_base = MAX77693_MUIC_REG_INTMASK1, + .mask_invert = true, + .num_regs = 3, + .irqs = max77693_muic_irqs, + .num_irqs = ARRAY_SIZE(max77693_muic_irqs), +}; + static int max77693_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -124,9 +207,45 @@ static int max77693_i2c_probe(struct i2c_client *i2c, goto err_regmap_muic; } - ret = max77693_irq_init(max77693); - if (ret < 0) - goto err_irq; + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_led_irq_chip, + &max77693->irq_data_led); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_regmap_muic; + } + + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_topsys_irq_chip, + &max77693->irq_data_topsys); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_irq_topsys; + } + + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_charger_irq_chip, + &max77693->irq_data_charger); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_irq_charger; + } + + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_muic_irq_chip, + &max77693->irq_data_muic); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_irq_muic; + } pm_runtime_set_active(max77693->dev); @@ -138,8 +257,14 @@ static int max77693_i2c_probe(struct i2c_client *i2c, return ret; err_mfd: - max77693_irq_exit(max77693); -err_irq: + mfd_remove_devices(max77693->dev); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic); +err_irq_muic: + regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger); +err_irq_charger: + regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys); +err_irq_topsys: + regmap_del_irq_chip(max77693->irq, max77693->irq_data_led); err_regmap_muic: i2c_unregister_device(max77693->haptic); err_i2c_haptic: @@ -152,7 +277,12 @@ static int max77693_i2c_remove(struct i2c_client *i2c) struct max77693_dev *max77693 = i2c_get_clientdata(i2c); mfd_remove_devices(max77693->dev); - max77693_irq_exit(max77693); + + regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_led); + i2c_unregister_device(max77693->muic); i2c_unregister_device(max77693->haptic); @@ -170,8 +300,11 @@ static int max77693_suspend(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct max77693_dev *max77693 = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) - irq_set_irq_wake(max77693->irq, 1); + if (device_may_wakeup(dev)) { + enable_irq_wake(max77693->irq); + disable_irq(max77693->irq); + } + return 0; } @@ -180,9 +313,12 @@ static int max77693_resume(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct max77693_dev *max77693 = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) - irq_set_irq_wake(max77693->irq, 0); - return max77693_irq_resume(max77693); + if (device_may_wakeup(dev)) { + disable_irq_wake(max77693->irq); + enable_irq(max77693->irq); + } + + return 0; } static const struct dev_pm_ops max77693_pm = { diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 80ec31d561c4..c466ff3e16b8 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -262,6 +262,41 @@ enum max77693_irq_source { MAX77693_IRQ_GROUP_NR, }; +#define LED_IRQ_FLED2_OPEN BIT(0) +#define LED_IRQ_FLED2_SHORT BIT(1) +#define LED_IRQ_FLED1_OPEN BIT(2) +#define LED_IRQ_FLED1_SHORT BIT(3) +#define LED_IRQ_MAX_FLASH BIT(4) + +#define TOPSYS_IRQ_T120C_INT BIT(0) +#define TOPSYS_IRQ_T140C_INT BIT(1) +#define TOPSYS_IRQ_LOWSYS_INT BIT(3) + +#define CHG_IRQ_BYP_I BIT(0) +#define CHG_IRQ_THM_I BIT(2) +#define CHG_IRQ_BAT_I BIT(3) +#define CHG_IRQ_CHG_I BIT(4) +#define CHG_IRQ_CHGIN_I BIT(6) + +#define MUIC_IRQ_INT1_ADC BIT(0) +#define MUIC_IRQ_INT1_ADC_LOW BIT(1) +#define MUIC_IRQ_INT1_ADC_ERR BIT(2) +#define MUIC_IRQ_INT1_ADC1K BIT(3) + +#define MUIC_IRQ_INT2_CHGTYP BIT(0) +#define MUIC_IRQ_INT2_CHGDETREUN BIT(1) +#define MUIC_IRQ_INT2_DCDTMR BIT(2) +#define MUIC_IRQ_INT2_DXOVP BIT(3) +#define MUIC_IRQ_INT2_VBVOLT BIT(4) +#define MUIC_IRQ_INT2_VIDRM BIT(5) + +#define MUIC_IRQ_INT3_EOC BIT(0) +#define MUIC_IRQ_INT3_CGMBC BIT(1) +#define MUIC_IRQ_INT3_OVP BIT(2) +#define MUIC_IRQ_INT3_MBCCHG_ERR BIT(3) +#define MUIC_IRQ_INT3_CHG_ENABLED BIT(4) +#define MUIC_IRQ_INT3_BAT_DET BIT(5) + enum max77693_irq { /* PMIC - FLASH */ MAX77693_LED_IRQ_FLED2_OPEN, @@ -282,6 +317,10 @@ enum max77693_irq { MAX77693_CHG_IRQ_CHG_I, MAX77693_CHG_IRQ_CHGIN_I, + MAX77693_IRQ_NR, +}; + +enum max77693_irq_muic { /* MUIC INT1 */ MAX77693_MUIC_IRQ_INT1_ADC, MAX77693_MUIC_IRQ_INT1_ADC_LOW, @@ -304,7 +343,7 @@ enum max77693_irq { MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, MAX77693_MUIC_IRQ_INT3_BAT_DET, - MAX77693_IRQ_NR, + MAX77693_MUIC_IRQ_NR, }; struct max77693_dev { @@ -319,7 +358,10 @@ struct max77693_dev { struct regmap *regmap_muic; struct regmap *regmap_haptic; - struct irq_domain *irq_domain; + struct regmap_irq_chip_data *irq_data_led; + struct regmap_irq_chip_data *irq_data_topsys; + struct regmap_irq_chip_data *irq_data_charger; + struct regmap_irq_chip_data *irq_data_muic; int irq; int irq_gpio; -- cgit v1.2.3-71-gd317 From 7d2a01b87f1682fde87461864e6682031bfaa0a9 Mon Sep 17 00:00:00 2001 From: Andreas Noever Date: Tue, 3 Jun 2014 22:04:09 +0200 Subject: PCI: Add pci_fixup_suspend_late quirk pass Add pci_fixup_suspend_late as a new pci_fixup_pass. The pass is called from suspend_noirq and poweroff_noirq. Using the same pass for suspend and hibernate is consistent with resume_early which is called by resume_noirq and restore_noirq. The new quirk pass is required for Thunderbolt support on Apple hardware. Signed-off-by: Andreas Noever Acked-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-driver.c | 18 ++++++++++++++---- drivers/pci/quirks.c | 7 +++++++ include/asm-generic/vmlinux.lds.h | 3 +++ include/linux/pci.h | 12 +++++++++++- 4 files changed, 35 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 3f8e3dbcaa7c..d04c5adafc16 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -582,7 +582,7 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) WARN_ONCE(pci_dev->current_state != prev, "PCI PM: Device state not saved by %pF\n", drv->suspend_late); - return 0; + goto Fixup; } } @@ -591,6 +591,9 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) pci_pm_set_unknown_state(pci_dev); +Fixup: + pci_fixup_device(pci_fixup_suspend_late, pci_dev); + return 0; } @@ -734,7 +737,7 @@ static int pci_pm_suspend_noirq(struct device *dev) if (!pm) { pci_save_state(pci_dev); - return 0; + goto Fixup; } if (pm->suspend_noirq) { @@ -751,7 +754,7 @@ static int pci_pm_suspend_noirq(struct device *dev) WARN_ONCE(pci_dev->current_state != prev, "PCI PM: State of device not saved by %pF\n", pm->suspend_noirq); - return 0; + goto Fixup; } } @@ -775,6 +778,9 @@ static int pci_pm_suspend_noirq(struct device *dev) if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI) pci_write_config_word(pci_dev, PCI_COMMAND, 0); +Fixup: + pci_fixup_device(pci_fixup_suspend_late, pci_dev); + return 0; } @@ -999,8 +1005,10 @@ static int pci_pm_poweroff_noirq(struct device *dev) if (pci_has_legacy_pm_support(to_pci_dev(dev))) return pci_legacy_suspend_late(dev, PMSG_HIBERNATE); - if (!drv || !drv->pm) + if (!drv || !drv->pm) { + pci_fixup_device(pci_fixup_suspend_late, pci_dev); return 0; + } if (drv->pm->poweroff_noirq) { int error; @@ -1021,6 +1029,8 @@ static int pci_pm_poweroff_noirq(struct device *dev) if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI) pci_write_config_word(pci_dev, PCI_COMMAND, 0); + pci_fixup_device(pci_fixup_suspend_late, pci_dev); + if (pcibios_pm_ops.poweroff_noirq) return pcibios_pm_ops.poweroff_noirq(dev); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d0f69269eb6c..03266af20d5f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3018,6 +3018,8 @@ extern struct pci_fixup __start_pci_fixups_resume_early[]; extern struct pci_fixup __end_pci_fixups_resume_early[]; extern struct pci_fixup __start_pci_fixups_suspend[]; extern struct pci_fixup __end_pci_fixups_suspend[]; +extern struct pci_fixup __start_pci_fixups_suspend_late[]; +extern struct pci_fixup __end_pci_fixups_suspend_late[]; static bool pci_apply_fixup_final_quirks; @@ -3063,6 +3065,11 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) end = __end_pci_fixups_suspend; break; + case pci_fixup_suspend_late: + start = __start_pci_fixups_suspend_late; + end = __end_pci_fixups_suspend_late; + break; + default: /* stupid compiler warning, you would think with an enum... */ return; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 471ba48c7ae4..47cd98656f9d 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -268,6 +268,9 @@ VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \ *(.pci_fixup_suspend) \ VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \ + VMLINUX_SYMBOL(__start_pci_fixups_suspend_late) = .; \ + *(.pci_fixup_suspend_late) \ + VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .; \ } \ \ /* Built-in firmware blobs */ \ diff --git a/include/linux/pci.h b/include/linux/pci.h index 466bcd111d85..295d3a9d8ffe 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1477,8 +1477,9 @@ enum pci_fixup_pass { pci_fixup_final, /* Final phase of device fixups */ pci_fixup_enable, /* pci_enable_device() time */ pci_fixup_resume, /* pci_device_resume() */ - pci_fixup_suspend, /* pci_device_suspend */ + pci_fixup_suspend, /* pci_device_suspend() */ pci_fixup_resume_early, /* pci_device_resume_early() */ + pci_fixup_suspend_late, /* pci_device_suspend_late() */ }; /* Anonymous variables would be nice... */ @@ -1519,6 +1520,11 @@ enum pci_fixup_pass { DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ suspend##hook, vendor, device, class, \ class_shift, hook) +#define DECLARE_PCI_FIXUP_CLASS_SUSPEND_LATE(vendor, device, class, \ + class_shift, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend_late, \ + suspend_late##hook, vendor, device, \ + class, class_shift, hook) #define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ @@ -1544,6 +1550,10 @@ enum pci_fixup_pass { DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ suspend##hook, vendor, device, \ PCI_ANY_ID, 0, hook) +#define DECLARE_PCI_FIXUP_SUSPEND_LATE(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend_late, \ + suspend_late##hook, vendor, device, \ + PCI_ANY_ID, 0, hook) #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); -- cgit v1.2.3-71-gd317 From 726526c3552c5718d5aba11ac2e914b0081a5c88 Mon Sep 17 00:00:00 2001 From: Sudeep Dutt Date: Fri, 11 Jul 2014 14:04:20 -0700 Subject: misc: mic: add a bus driver for virtual MIC devices This MIC virtual bus driver takes the responsibility of creating all the virtual devices connected to the PCIe device on the host and the platform device on the card. The MIC bus hardware operations provide a way to abstract certain hardware details from the base physical devices. Examples of devices added on the MIC virtual bus include host DMA and card DMA. This abstraction enables using a common DMA driver on host and card. Reviewed-by: Ashutosh Dixit Reviewed-by: Nikhil Rao Signed-off-by: Sudeep Dutt Signed-off-by: Siva Yerramreddy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mic/Kconfig | 17 ++++ drivers/misc/mic/Makefile | 1 + drivers/misc/mic/bus/Makefile | 5 + drivers/misc/mic/bus/mic_bus.c | 218 +++++++++++++++++++++++++++++++++++++++++ include/linux/mic_bus.h | 110 +++++++++++++++++++++ 5 files changed, 351 insertions(+) create mode 100644 drivers/misc/mic/bus/Makefile create mode 100644 drivers/misc/mic/bus/mic_bus.c create mode 100644 include/linux/mic_bus.h (limited to 'include/linux') diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig index 462a5b1d8651..ee1d2ac3cd09 100644 --- a/drivers/misc/mic/Kconfig +++ b/drivers/misc/mic/Kconfig @@ -1,3 +1,20 @@ +comment "Intel MIC Bus Driver" + +config INTEL_MIC_BUS + tristate "Intel MIC Bus Driver" + depends on 64BIT && PCI && X86 && X86_DEV_DMA_OPS + help + This option is selected by any driver which registers a + device or driver on the MIC Bus, such as CONFIG_INTEL_MIC_HOST, + CONFIG_INTEL_MIC_CARD, CONFIG_INTEL_MIC_X100_DMA etc. + + If you are building a host/card kernel with an Intel MIC device + then say M (recommended) or Y, else say N. If unsure say N. + + More information about the Intel MIC family as well as the Linux + OS and tools for MIC to use with this driver are available from + . + comment "Intel MIC Host Driver" config INTEL_MIC_HOST diff --git a/drivers/misc/mic/Makefile b/drivers/misc/mic/Makefile index 05b34d683a58..e9bf148755e2 100644 --- a/drivers/misc/mic/Makefile +++ b/drivers/misc/mic/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_INTEL_MIC_HOST) += host/ obj-$(CONFIG_INTEL_MIC_CARD) += card/ +obj-$(CONFIG_INTEL_MIC_BUS) += bus/ diff --git a/drivers/misc/mic/bus/Makefile b/drivers/misc/mic/bus/Makefile new file mode 100644 index 000000000000..d85c7f2a0af4 --- /dev/null +++ b/drivers/misc/mic/bus/Makefile @@ -0,0 +1,5 @@ +# +# Makefile - Intel MIC Linux driver. +# Copyright(c) 2014, Intel Corporation. +# +obj-$(CONFIG_INTEL_MIC_BUS) += mic_bus.o diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c new file mode 100644 index 000000000000..961ae90aae47 --- /dev/null +++ b/drivers/misc/mic/bus/mic_bus.c @@ -0,0 +1,218 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel MIC Bus driver. + * + * This implementation is very similar to the the virtio bus driver + * implementation @ drivers/virtio/virtio.c + */ +#include +#include +#include +#include + +/* Unique numbering for mbus devices. */ +static DEFINE_IDA(mbus_index_ida); + +static ssize_t device_show(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct mbus_device *dev = dev_to_mbus(d); + return sprintf(buf, "0x%04x\n", dev->id.device); +} +static DEVICE_ATTR_RO(device); + +static ssize_t vendor_show(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct mbus_device *dev = dev_to_mbus(d); + return sprintf(buf, "0x%04x\n", dev->id.vendor); +} +static DEVICE_ATTR_RO(vendor); + +static ssize_t modalias_show(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct mbus_device *dev = dev_to_mbus(d); + return sprintf(buf, "mbus:d%08Xv%08X\n", + dev->id.device, dev->id.vendor); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *mbus_dev_attrs[] = { + &dev_attr_device.attr, + &dev_attr_vendor.attr, + &dev_attr_modalias.attr, + NULL, +}; +ATTRIBUTE_GROUPS(mbus_dev); + +static inline int mbus_id_match(const struct mbus_device *dev, + const struct mbus_device_id *id) +{ + if (id->device != dev->id.device && id->device != MBUS_DEV_ANY_ID) + return 0; + + return id->vendor == MBUS_DEV_ANY_ID || id->vendor == dev->id.vendor; +} + +/* + * This looks through all the IDs a driver claims to support. If any of them + * match, we return 1 and the kernel will call mbus_dev_probe(). + */ +static int mbus_dev_match(struct device *dv, struct device_driver *dr) +{ + unsigned int i; + struct mbus_device *dev = dev_to_mbus(dv); + const struct mbus_device_id *ids; + + ids = drv_to_mbus(dr)->id_table; + for (i = 0; ids[i].device; i++) + if (mbus_id_match(dev, &ids[i])) + return 1; + return 0; +} + +static int mbus_uevent(struct device *dv, struct kobj_uevent_env *env) +{ + struct mbus_device *dev = dev_to_mbus(dv); + + return add_uevent_var(env, "MODALIAS=mbus:d%08Xv%08X", + dev->id.device, dev->id.vendor); +} + +static int mbus_dev_probe(struct device *d) +{ + int err; + struct mbus_device *dev = dev_to_mbus(d); + struct mbus_driver *drv = drv_to_mbus(dev->dev.driver); + + err = drv->probe(dev); + if (!err) + if (drv->scan) + drv->scan(dev); + return err; +} + +static int mbus_dev_remove(struct device *d) +{ + struct mbus_device *dev = dev_to_mbus(d); + struct mbus_driver *drv = drv_to_mbus(dev->dev.driver); + + drv->remove(dev); + return 0; +} + +static struct bus_type mic_bus = { + .name = "mic_bus", + .match = mbus_dev_match, + .dev_groups = mbus_dev_groups, + .uevent = mbus_uevent, + .probe = mbus_dev_probe, + .remove = mbus_dev_remove, +}; + +int mbus_register_driver(struct mbus_driver *driver) +{ + driver->driver.bus = &mic_bus; + return driver_register(&driver->driver); +} +EXPORT_SYMBOL_GPL(mbus_register_driver); + +void mbus_unregister_driver(struct mbus_driver *driver) +{ + driver_unregister(&driver->driver); +} +EXPORT_SYMBOL_GPL(mbus_unregister_driver); + +static void mbus_release_dev(struct device *d) +{ + struct mbus_device *mbdev = dev_to_mbus(d); + kfree(mbdev); +} + +struct mbus_device * +mbus_register_device(struct device *pdev, int id, struct dma_map_ops *dma_ops, + struct mbus_hw_ops *hw_ops, void __iomem *mmio_va) +{ + int ret; + struct mbus_device *mbdev; + + mbdev = kzalloc(sizeof(*mbdev), GFP_KERNEL); + if (!mbdev) + return ERR_PTR(-ENOMEM); + + mbdev->mmio_va = mmio_va; + mbdev->dev.parent = pdev; + mbdev->id.device = id; + mbdev->id.vendor = MBUS_DEV_ANY_ID; + mbdev->dev.archdata.dma_ops = dma_ops; + mbdev->dev.dma_mask = &mbdev->dev.coherent_dma_mask; + dma_set_mask(&mbdev->dev, DMA_BIT_MASK(64)); + mbdev->dev.release = mbus_release_dev; + mbdev->hw_ops = hw_ops; + mbdev->dev.bus = &mic_bus; + + /* Assign a unique device index and hence name. */ + ret = ida_simple_get(&mbus_index_ida, 0, 0, GFP_KERNEL); + if (ret < 0) + goto free_mbdev; + + mbdev->index = ret; + dev_set_name(&mbdev->dev, "mbus-dev%u", mbdev->index); + /* + * device_register() causes the bus infrastructure to look for a + * matching driver. + */ + ret = device_register(&mbdev->dev); + if (ret) + goto ida_remove; + return mbdev; +ida_remove: + ida_simple_remove(&mbus_index_ida, mbdev->index); +free_mbdev: + kfree(mbdev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(mbus_register_device); + +void mbus_unregister_device(struct mbus_device *mbdev) +{ + int index = mbdev->index; /* save for after device release */ + + device_unregister(&mbdev->dev); + ida_simple_remove(&mbus_index_ida, index); +} +EXPORT_SYMBOL_GPL(mbus_unregister_device); + +static int __init mbus_init(void) +{ + return bus_register(&mic_bus); +} + +static void __exit mbus_exit(void) +{ + bus_unregister(&mic_bus); + ida_destroy(&mbus_index_ida); +} + +core_initcall(mbus_init); +module_exit(mbus_exit); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) MIC Bus driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h new file mode 100644 index 000000000000..d5b5f76d57ef --- /dev/null +++ b/include/linux/mic_bus.h @@ -0,0 +1,110 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel MIC Bus driver. + * + * This implementation is very similar to the the virtio bus driver + * implementation @ include/linux/virtio.h. + */ +#ifndef _MIC_BUS_H_ +#define _MIC_BUS_H_ +/* + * Everything a mbus driver needs to work with any particular mbus + * implementation. + */ +#include +#include + +struct mbus_device_id { + __u32 device; + __u32 vendor; +}; + +#define MBUS_DEV_DMA_HOST 2 +#define MBUS_DEV_DMA_MIC 3 +#define MBUS_DEV_ANY_ID 0xffffffff + +/** + * mbus_device - representation of a device using mbus + * @mmio_va: virtual address of mmio space + * @hw_ops: the hardware ops supported by this device. + * @id: the device type identification (used to match it with a driver). + * @dev: underlying device. + * be used to communicate with. + * @index: unique position on the mbus bus + */ +struct mbus_device { + void __iomem *mmio_va; + struct mbus_hw_ops *hw_ops; + struct mbus_device_id id; + struct device dev; + int index; +}; + +/** + * mbus_driver - operations for a mbus I/O driver + * @driver: underlying device driver (populate name and owner). + * @id_table: the ids serviced by this driver. + * @probe: the function to call when a device is found. Returns 0 or -errno. + * @remove: the function to call when a device is removed. + */ +struct mbus_driver { + struct device_driver driver; + const struct mbus_device_id *id_table; + int (*probe)(struct mbus_device *dev); + void (*scan)(struct mbus_device *dev); + void (*remove)(struct mbus_device *dev); +}; + +/** + * struct mic_irq - opaque pointer used as cookie + */ +struct mic_irq; + +/** + * mbus_hw_ops - Hardware operations for accessing a MIC device on the MIC bus. + */ +struct mbus_hw_ops { + struct mic_irq* (*request_threaded_irq)(struct mbus_device *mbdev, + irq_handler_t handler, + irq_handler_t thread_fn, + const char *name, void *data, + int intr_src); + void (*free_irq)(struct mbus_device *mbdev, + struct mic_irq *cookie, void *data); + void (*ack_interrupt)(struct mbus_device *mbdev, int num); +}; + +struct mbus_device * +mbus_register_device(struct device *pdev, int id, struct dma_map_ops *dma_ops, + struct mbus_hw_ops *hw_ops, void __iomem *mmio_va); +void mbus_unregister_device(struct mbus_device *mbdev); + +int mbus_register_driver(struct mbus_driver *drv); +void mbus_unregister_driver(struct mbus_driver *drv); + +static inline struct mbus_device *dev_to_mbus(struct device *_dev) +{ + return container_of(_dev, struct mbus_device, dev); +} + +static inline struct mbus_driver *drv_to_mbus(struct device_driver *drv) +{ + return container_of(drv, struct mbus_driver, driver); +} + +#endif /* _MIC_BUS_H */ -- cgit v1.2.3-71-gd317 From 914b881f9452fd615cc597b434fd8c0e12a7dae2 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 22 May 2014 14:06:33 +0900 Subject: extcon: sm5502: Add support new SM5502 extcon device driver This patch add new SM5502 MUIC(Micro-USB Interface Controller) device by using EXTCON subsystem. The extcon-sm5502 driver is capable of identifying the type of the external power source and attached accessory. An external power sources, such as Deticated Charger or a standard USB port, are able to charge the battery in the smart phone via the connector. Signed-off-by: Chanwoo Choi --- drivers/extcon/Kconfig | 10 + drivers/extcon/Makefile | 1 + drivers/extcon/extcon-sm5502.c | 620 +++++++++++++++++++++++++++++++++++++++++ include/linux/extcon/sm5502.h | 264 ++++++++++++++++++ 4 files changed, 895 insertions(+) create mode 100644 drivers/extcon/extcon-sm5502.c create mode 100644 include/linux/extcon/sm5502.h (limited to 'include/linux') diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 9125eba6b3d6..6f2f4727de2c 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -70,4 +70,14 @@ config EXTCON_PALMAS Say Y here to enable support for USB peripheral and USB host detection by palmas usb. +config EXTCON_SM5502 + tristate "SM5502 EXTCON support" + select IRQ_DOMAIN + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the MUIC device of + Silicon Mitus SM5502. The SM5502 is a USB port accessory + detector and switch. + endif # MULTISTATE_SWITCH diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index e48abc6d230f..b38546eb522a 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o +obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c new file mode 100644 index 000000000000..9f318c222b89 --- /dev/null +++ b/drivers/extcon/extcon-sm5502.c @@ -0,0 +1,620 @@ +/* + * extcon-sm5502.c - Silicon Mitus SM5502 extcon drvier to support USB switches + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * Author: Chanwoo Choi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct muic_irq { + unsigned int irq; + const char *name; + unsigned int virq; +}; + +struct reg_data { + u8 reg; + unsigned int val; + bool invert; +}; + +struct sm5502_muic_info { + struct device *dev; + struct extcon_dev *edev; + + struct i2c_client *i2c; + struct regmap *regmap; + + struct regmap_irq_chip_data *irq_data; + struct muic_irq *muic_irqs; + unsigned int num_muic_irqs; + int irq; + bool irq_attach; + bool irq_detach; + struct work_struct irq_work; + + struct reg_data *reg_data; + unsigned int num_reg_data; + + struct mutex mutex; +}; + +/* Default value of SM5502 register to bring up MUIC device. */ +static struct reg_data sm5502_reg_data[] = { + { + .reg = SM5502_REG_CONTROL, + .val = SM5502_REG_CONTROL_MASK_INT_MASK, + .invert = false, + }, { + .reg = SM5502_REG_INTMASK1, + .val = SM5502_REG_INTM1_KP_MASK + | SM5502_REG_INTM1_LKP_MASK + | SM5502_REG_INTM1_LKR_MASK, + .invert = true, + }, { + .reg = SM5502_REG_INTMASK2, + .val = SM5502_REG_INTM2_VBUS_DET_MASK + | SM5502_REG_INTM2_REV_ACCE_MASK + | SM5502_REG_INTM2_ADC_CHG_MASK + | SM5502_REG_INTM2_STUCK_KEY_MASK + | SM5502_REG_INTM2_STUCK_KEY_RCV_MASK + | SM5502_REG_INTM2_MHL_MASK, + .invert = true, + }, + { } +}; + +/* List of detectable cables */ +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_USB_HOST, + EXTCON_CABLE_TA, + + EXTCON_CABLE_END, +}; + +static const char *sm5502_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_USB_HOST] = "USB-Host", + [EXTCON_CABLE_TA] = "TA", + NULL, +}; + +/* Define supported accessory type */ +enum sm5502_muic_acc_type { + SM5502_MUIC_ADC_GROUND = 0x0, + SM5502_MUIC_ADC_SEND_END_BUTTON, + SM5502_MUIC_ADC_REMOTE_S1_BUTTON, + SM5502_MUIC_ADC_REMOTE_S2_BUTTON, + SM5502_MUIC_ADC_REMOTE_S3_BUTTON, + SM5502_MUIC_ADC_REMOTE_S4_BUTTON, + SM5502_MUIC_ADC_REMOTE_S5_BUTTON, + SM5502_MUIC_ADC_REMOTE_S6_BUTTON, + SM5502_MUIC_ADC_REMOTE_S7_BUTTON, + SM5502_MUIC_ADC_REMOTE_S8_BUTTON, + SM5502_MUIC_ADC_REMOTE_S9_BUTTON, + SM5502_MUIC_ADC_REMOTE_S10_BUTTON, + SM5502_MUIC_ADC_REMOTE_S11_BUTTON, + SM5502_MUIC_ADC_REMOTE_S12_BUTTON, + SM5502_MUIC_ADC_RESERVED_ACC_1, + SM5502_MUIC_ADC_RESERVED_ACC_2, + SM5502_MUIC_ADC_RESERVED_ACC_3, + SM5502_MUIC_ADC_RESERVED_ACC_4, + SM5502_MUIC_ADC_RESERVED_ACC_5, + SM5502_MUIC_ADC_AUDIO_TYPE2, + SM5502_MUIC_ADC_PHONE_POWERED_DEV, + SM5502_MUIC_ADC_TTY_CONVERTER, + SM5502_MUIC_ADC_UART_CABLE, + SM5502_MUIC_ADC_TYPE1_CHARGER, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB, + SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE, + SM5502_MUIC_ADC_TYPE2_CHARGER, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART, + SM5502_MUIC_ADC_AUDIO_TYPE1, + SM5502_MUIC_ADC_OPEN = 0x1f, + + /* The below accessories have same ADC value (0x1f or 0x1e). + So, Device type1 is used to separate specific accessory. */ + /* |---------|--ADC| */ + /* | [7:5]|[4:0]| */ + SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e, /* | 001|11110| */ + SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e, /* | 010|11110| */ + /* |Dev Type1|--ADC| */ + SM5502_MUIC_ADC_OPEN_USB = 0x5f, /* | 010|11111| */ + SM5502_MUIC_ADC_OPEN_TA = 0xdf, /* | 110|11111| */ + SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff, /* | 111|11111| */ +}; + +/* List of supported interrupt for SM5502 */ +static struct muic_irq sm5502_muic_irqs[] = { + { SM5502_IRQ_INT1_ATTACH, "muic-attach" }, + { SM5502_IRQ_INT1_DETACH, "muic-detach" }, + { SM5502_IRQ_INT1_KP, "muic-kp" }, + { SM5502_IRQ_INT1_LKP, "muic-lkp" }, + { SM5502_IRQ_INT1_LKR, "muic-lkr" }, + { SM5502_IRQ_INT1_OVP_EVENT, "muic-ovp-event" }, + { SM5502_IRQ_INT1_OCP_EVENT, "muic-ocp-event" }, + { SM5502_IRQ_INT1_OVP_OCP_DIS, "muic-ovp-ocp-dis" }, + { SM5502_IRQ_INT2_VBUS_DET, "muic-vbus-det" }, + { SM5502_IRQ_INT2_REV_ACCE, "muic-rev-acce" }, + { SM5502_IRQ_INT2_ADC_CHG, "muic-adc-chg" }, + { SM5502_IRQ_INT2_STUCK_KEY, "muic-stuck-key" }, + { SM5502_IRQ_INT2_STUCK_KEY_RCV, "muic-stuck-key-rcv" }, + { SM5502_IRQ_INT2_MHL, "muic-mhl" }, +}; + +/* Define interrupt list of SM5502 to register regmap_irq */ +static const struct regmap_irq sm5502_irqs[] = { + /* INT1 interrupts */ + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_ATTACH_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_DETACH_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_KP_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKP_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKR_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_EVENT_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OCP_EVENT_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_OCP_DIS_MASK, }, + + /* INT2 interrupts */ + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_VBUS_DET_MASK,}, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_REV_ACCE_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_ADC_CHG_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_MHL_MASK, }, +}; + +static const struct regmap_irq_chip sm5502_muic_irq_chip = { + .name = "sm5502", + .status_base = SM5502_REG_INT1, + .mask_base = SM5502_REG_INTMASK1, + .mask_invert = false, + .num_regs = 2, + .irqs = sm5502_irqs, + .num_irqs = ARRAY_SIZE(sm5502_irqs), +}; + +/* Define regmap configuration of SM5502 for I2C communication */ +static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SM5502_REG_INTMASK1: + case SM5502_REG_INTMASK2: + return true; + default: + break; + } + return false; +} + +static const struct regmap_config sm5502_muic_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = sm5502_muic_volatile_reg, + .max_register = SM5502_REG_END, +}; + +/* Return cable type of attached or detached accessories */ +static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info) +{ + unsigned int cable_type = -1, adc, dev_type1; + int ret; + + /* Read ADC value according to external cable or button */ + ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc); + if (ret) { + dev_err(info->dev, "failed to read ADC register\n"); + return ret; + } + + /* + * If ADC is SM5502_MUIC_ADC_GROUND(0x0), external cable hasn't + * connected with to MUIC device. + */ + cable_type &= SM5502_REG_ADC_MASK; + if (cable_type == SM5502_MUIC_ADC_GROUND) + return SM5502_MUIC_ADC_GROUND; + + switch (cable_type) { + case SM5502_MUIC_ADC_GROUND: + case SM5502_MUIC_ADC_SEND_END_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S1_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S2_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S3_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S4_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S5_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S6_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S7_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S8_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S9_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S10_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S11_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S12_BUTTON: + case SM5502_MUIC_ADC_RESERVED_ACC_1: + case SM5502_MUIC_ADC_RESERVED_ACC_2: + case SM5502_MUIC_ADC_RESERVED_ACC_3: + case SM5502_MUIC_ADC_RESERVED_ACC_4: + case SM5502_MUIC_ADC_RESERVED_ACC_5: + case SM5502_MUIC_ADC_AUDIO_TYPE2: + case SM5502_MUIC_ADC_PHONE_POWERED_DEV: + case SM5502_MUIC_ADC_TTY_CONVERTER: + case SM5502_MUIC_ADC_UART_CABLE: + case SM5502_MUIC_ADC_TYPE1_CHARGER: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB: + case SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE: + case SM5502_MUIC_ADC_TYPE2_CHARGER: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART: + break; + case SM5502_MUIC_ADC_AUDIO_TYPE1: + /* + * Check whether cable type is + * SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE + * or SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END + * by using Button event. + */ + break; + case SM5502_MUIC_ADC_OPEN: + ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1, + &dev_type1); + if (ret) { + dev_err(info->dev, "failed to read DEV_TYPE1 reg\n"); + return ret; + } + + switch (dev_type1) { + case SM5502_REG_DEV_TYPE1_USB_SDP_MASK: + cable_type = SM5502_MUIC_ADC_OPEN_USB; + break; + case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK: + cable_type = SM5502_MUIC_ADC_OPEN_TA; + break; + case SM5502_REG_DEV_TYPE1_USB_OTG_MASK: + cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG; + break; + default: + dev_dbg(info->dev, + "cannot identify the cable type: adc(0x%x) " + "dev_type1(0x%x)\n", adc, dev_type1); + return -EINVAL; + }; + break; + default: + dev_err(info->dev, + "failed to identify the cable type: adc(0x%x)\n", adc); + return -EINVAL; + }; + + return cable_type; +} + +static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, + bool attached) +{ + static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND; + const char **cable_names = info->edev->supported_cable; + unsigned int cable_type = SM5502_MUIC_ADC_GROUND; + unsigned int idx = 0; + + if (!cable_names) + return 0; + + /* Get the type of attached or detached cable */ + if (attached) + cable_type = sm5502_muic_get_cable_type(info); + else if (!attached) + cable_type = prev_cable_type; + prev_cable_type = cable_type; + + switch (cable_type) { + case SM5502_MUIC_ADC_OPEN_USB: + idx = EXTCON_CABLE_USB; + break; + case SM5502_MUIC_ADC_OPEN_TA: + idx = EXTCON_CABLE_TA; + break; + case SM5502_MUIC_ADC_OPEN_USB_OTG: + idx = EXTCON_CABLE_USB_HOST; + break; + default: + dev_dbg(info->dev, + "cannot handle this cable_type (0x%x)\n", cable_type); + return 0; + }; + + extcon_set_cable_state(info->edev, cable_names[idx], attached); + + return 0; +} + +static void sm5502_muic_irq_work(struct work_struct *work) +{ + struct sm5502_muic_info *info = container_of(work, + struct sm5502_muic_info, irq_work); + int ret = 0; + + if (!info->edev) + return; + + mutex_lock(&info->mutex); + + /* Detect attached or detached cables */ + if (info->irq_attach) { + ret = sm5502_muic_cable_handler(info, true); + info->irq_attach = false; + } + if (info->irq_detach) { + ret = sm5502_muic_cable_handler(info, false); + info->irq_detach = false; + } + + if (ret < 0) + dev_err(info->dev, "failed to handle MUIC interrupt\n"); + + mutex_unlock(&info->mutex); + + return; +} + +/* + * Sets irq_attach or irq_detach in sm5502_muic_info and returns 0. + * Returns -ESRCH if irq_type does not match registered IRQ for this dev type. + */ +static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type) +{ + switch (irq_type) { + case SM5502_IRQ_INT1_ATTACH: + info->irq_attach = true; + break; + case SM5502_IRQ_INT1_DETACH: + info->irq_detach = true; + break; + case SM5502_IRQ_INT1_KP: + case SM5502_IRQ_INT1_LKP: + case SM5502_IRQ_INT1_LKR: + case SM5502_IRQ_INT1_OVP_EVENT: + case SM5502_IRQ_INT1_OCP_EVENT: + case SM5502_IRQ_INT1_OVP_OCP_DIS: + case SM5502_IRQ_INT2_VBUS_DET: + case SM5502_IRQ_INT2_REV_ACCE: + case SM5502_IRQ_INT2_ADC_CHG: + case SM5502_IRQ_INT2_STUCK_KEY: + case SM5502_IRQ_INT2_STUCK_KEY_RCV: + case SM5502_IRQ_INT2_MHL: + default: + break; + } + + return 0; +} + +static irqreturn_t sm5502_muic_irq_handler(int irq, void *data) +{ + struct sm5502_muic_info *info = data; + int i, irq_type = -1, ret; + + for (i = 0; i < info->num_muic_irqs; i++) + if (irq == info->muic_irqs[i].virq) + irq_type = info->muic_irqs[i].irq; + + ret = sm5502_parse_irq(info, irq_type); + if (ret < 0) { + dev_warn(info->dev, "cannot handle is interrupt:%d\n", + irq_type); + return IRQ_HANDLED; + } + schedule_work(&info->irq_work); + + return IRQ_HANDLED; +} + +static void sm5502_init_dev_type(struct sm5502_muic_info *info) +{ + unsigned int reg_data, vendor_id, version_id; + int i, ret; + + /* To test I2C, Print version_id and vendor_id of SM5502 */ + ret = regmap_read(info->regmap, SM5502_REG_DEVICE_ID, ®_data); + if (ret) { + dev_err(info->dev, + "failed to read DEVICE_ID register: %d\n", ret); + return; + } + + vendor_id = ((reg_data & SM5502_REG_DEVICE_ID_VENDOR_MASK) >> + SM5502_REG_DEVICE_ID_VENDOR_SHIFT); + version_id = ((reg_data & SM5502_REG_DEVICE_ID_VERSION_MASK) >> + SM5502_REG_DEVICE_ID_VERSION_SHIFT); + + dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n", + version_id, vendor_id); + + /* Initiazle the register of SM5502 device to bring-up */ + for (i = 0; i < info->num_reg_data; i++) { + unsigned int val = 0; + + if (!info->reg_data[i].invert) + val |= ~info->reg_data[i].val; + else + val = info->reg_data[i].val; + regmap_write(info->regmap, info->reg_data[i].reg, val); + } +} + +static int sm5022_muic_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct sm5502_muic_info *info; + int i, ret, irq_flags; + + if (!np) + return -EINVAL; + + info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + i2c_set_clientdata(i2c, info); + + info->dev = &i2c->dev; + info->i2c = i2c; + info->irq = i2c->irq; + info->muic_irqs = sm5502_muic_irqs; + info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs); + info->reg_data = sm5502_reg_data; + info->num_reg_data = ARRAY_SIZE(sm5502_reg_data); + + mutex_init(&info->mutex); + + INIT_WORK(&info->irq_work, sm5502_muic_irq_work); + + info->regmap = devm_regmap_init_i2c(i2c, &sm5502_muic_regmap_config); + if (IS_ERR(info->regmap)) { + ret = PTR_ERR(info->regmap); + dev_err(info->dev, "failed to allocate register map: %d\n", + ret); + return ret; + } + + /* Support irq domain for SM5502 MUIC device */ + irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED; + ret = regmap_add_irq_chip(info->regmap, info->irq, irq_flags, 0, + &sm5502_muic_irq_chip, &info->irq_data); + if (ret != 0) { + dev_err(info->dev, "failed to request IRQ %d: %d\n", + info->irq, ret); + return ret; + } + + for (i = 0; i < info->num_muic_irqs; i++) { + struct muic_irq *muic_irq = &info->muic_irqs[i]; + unsigned int virq = 0; + + virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq); + if (virq <= 0) + return -EINVAL; + muic_irq->virq = virq; + + ret = devm_request_threaded_irq(info->dev, virq, NULL, + sm5502_muic_irq_handler, + IRQF_NO_SUSPEND, + muic_irq->name, info); + if (ret) { + dev_err(info->dev, "failed: irq request (IRQ: %d," + " error :%d)\n", muic_irq->irq, ret); + return ret; + } + } + + /* Allocate extcon device */ + info->edev = devm_extcon_dev_allocate(info->dev, sm5502_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(info->dev, "failed to allocate memory for extcon\n"); + return -ENOMEM; + } + info->edev->name = np->name; + + /* Register extcon device */ + ret = devm_extcon_dev_register(info->dev, info->edev); + if (ret) { + dev_err(info->dev, "failed to register extcon device\n"); + return ret; + } + + /* Initialize SM5502 device and print vendor id and version id */ + sm5502_init_dev_type(info); + + return 0; +} + +static int sm5502_muic_i2c_remove(struct i2c_client *i2c) +{ + struct sm5502_muic_info *info = i2c_get_clientdata(i2c); + + regmap_del_irq_chip(info->irq, info->irq_data); + + return 0; +} + +static struct of_device_id sm5502_dt_match[] = { + { .compatible = "siliconmitus,sm5502-muic" }, + { }, +}; + +#ifdef CONFIG_PM_SLEEP +static int sm5502_muic_suspend(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sm5502_muic_info *info = i2c_get_clientdata(i2c); + + enable_irq_wake(info->irq); + + return 0; +} + +static int sm5502_muic_resume(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sm5502_muic_info *info = i2c_get_clientdata(i2c); + + disable_irq_wake(info->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops, + sm5502_muic_suspend, sm5502_muic_resume); + +static const struct i2c_device_id sm5502_i2c_id[] = { + { "sm5502", TYPE_SM5502 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id); + +static struct i2c_driver sm5502_muic_i2c_driver = { + .driver = { + .name = "sm5502", + .owner = THIS_MODULE, + .pm = &sm5502_muic_pm_ops, + .of_match_table = sm5502_dt_match, + }, + .probe = sm5022_muic_i2c_probe, + .remove = sm5502_muic_i2c_remove, + .id_table = sm5502_i2c_id, +}; + +static int __init sm5502_muic_i2c_init(void) +{ + return i2c_add_driver(&sm5502_muic_i2c_driver); +} +subsys_initcall(sm5502_muic_i2c_init); + +MODULE_DESCRIPTION("Silicon Mitus SM5502 Extcon driver"); +MODULE_AUTHOR("Chanwoo Choi "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/extcon/sm5502.h b/include/linux/extcon/sm5502.h new file mode 100644 index 000000000000..17bd6550c485 --- /dev/null +++ b/include/linux/extcon/sm5502.h @@ -0,0 +1,264 @@ +/* + * sm5502.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_EXTCON_SM5502_H +#define __LINUX_EXTCON_SM5502_H + +enum sm5502_types { + TYPE_SM5502, +}; + +/* SM5502 registers */ +enum sm5502_reg { + SM5502_REG_DEVICE_ID = 0x01, + SM5502_REG_CONTROL, + SM5502_REG_INT1, + SM5502_REG_INT2, + SM5502_REG_INTMASK1, + SM5502_REG_INTMASK2, + SM5502_REG_ADC, + SM5502_REG_TIMING_SET1, + SM5502_REG_TIMING_SET2, + SM5502_REG_DEV_TYPE1, + SM5502_REG_DEV_TYPE2, + SM5502_REG_BUTTON1, + SM5502_REG_BUTTON2, + SM5502_REG_CAR_KIT_STATUS, + SM5502_REG_RSVD1, + SM5502_REG_RSVD2, + SM5502_REG_RSVD3, + SM5502_REG_RSVD4, + SM5502_REG_MANUAL_SW1, + SM5502_REG_MANUAL_SW2, + SM5502_REG_DEV_TYPE3, + SM5502_REG_RSVD5, + SM5502_REG_RSVD6, + SM5502_REG_RSVD7, + SM5502_REG_RSVD8, + SM5502_REG_RSVD9, + SM5502_REG_RESET, + SM5502_REG_RSVD10, + SM5502_REG_RESERVED_ID1, + SM5502_REG_RSVD11, + SM5502_REG_RSVD12, + SM5502_REG_RESERVED_ID2, + SM5502_REG_RSVD13, + SM5502_REG_OCP, + SM5502_REG_RSVD14, + SM5502_REG_RSVD15, + SM5502_REG_RSVD16, + SM5502_REG_RSVD17, + SM5502_REG_RSVD18, + SM5502_REG_RSVD19, + SM5502_REG_RSVD20, + SM5502_REG_RSVD21, + SM5502_REG_RSVD22, + SM5502_REG_RSVD23, + SM5502_REG_RSVD24, + SM5502_REG_RSVD25, + SM5502_REG_RSVD26, + SM5502_REG_RSVD27, + SM5502_REG_RSVD28, + SM5502_REG_RSVD29, + SM5502_REG_RSVD30, + SM5502_REG_RSVD31, + SM5502_REG_RSVD32, + SM5502_REG_RSVD33, + SM5502_REG_RSVD34, + SM5502_REG_RSVD35, + SM5502_REG_RSVD36, + SM5502_REG_RESERVED_ID3, + + SM5502_REG_END, +}; + +/* Define SM5502 MASK/SHIFT constant */ +#define SM5502_REG_DEVICE_ID_VENDOR_SHIFT 0 +#define SM5502_REG_DEVICE_ID_VERSION_SHIFT 3 +#define SM5502_REG_DEVICE_ID_VENDOR_MASK (0x3 << SM5502_REG_DEVICE_ID_VENDOR_SHIFT) +#define SM5502_REG_DEVICE_ID_VERSION_MASK (0x1f << SM5502_REG_DEVICE_ID_VERSION_SHIFT) + +#define SM5502_REG_CONTROL_MASK_INT_SHIFT 0 +#define SM5502_REG_CONTROL_WAIT_SHIFT 1 +#define SM5502_REG_CONTROL_MANUAL_SW_SHIFT 2 +#define SM5502_REG_CONTROL_RAW_DATA_SHIFT 3 +#define SM5502_REG_CONTROL_SW_OPEN_SHIFT 4 +#define SM5502_REG_CONTROL_MASK_INT_MASK (0x1 << SM5502_REG_CONTROL_MASK_INT_SHIFT) +#define SM5502_REG_CONTROL_WAIT_MASK (0x1 << SM5502_REG_CONTROL_WAIT_SHIFT) +#define SM5502_REG_CONTROL_MANUAL_SW_MASK (0x1 << SM5502_REG_CONTROL_MANUAL_SW_SHIFT) +#define SM5502_REG_CONTROL_RAW_DATA_MASK (0x1 << SM5502_REG_CONTROL_RAW_DATA_SHIFT) +#define SM5502_REG_CONTROL_SW_OPEN_MASK (0x1 << SM5502_REG_CONTROL_SW_OPEN_SHIFT) + +#define SM5502_REG_INTM1_ATTACH_SHIFT 0 +#define SM5502_REG_INTM1_DETACH_SHIFT 1 +#define SM5502_REG_INTM1_KP_SHIFT 2 +#define SM5502_REG_INTM1_LKP_SHIFT 3 +#define SM5502_REG_INTM1_LKR_SHIFT 4 +#define SM5502_REG_INTM1_OVP_EVENT_SHIFT 5 +#define SM5502_REG_INTM1_OCP_EVENT_SHIFT 6 +#define SM5502_REG_INTM1_OVP_OCP_DIS_SHIFT 7 +#define SM5502_REG_INTM1_ATTACH_MASK (0x1 << SM5502_REG_INTM1_ATTACH_SHIFT) +#define SM5502_REG_INTM1_DETACH_MASK (0x1 << SM5502_REG_INTM1_DETACH_SHIFT) +#define SM5502_REG_INTM1_KP_MASK (0x1 << SM5502_REG_INTM1_KP_SHIFT) +#define SM5502_REG_INTM1_LKP_MASK (0x1 << SM5502_REG_INTM1_LKP_SHIFT) +#define SM5502_REG_INTM1_LKR_MASK (0x1 << SM5502_REG_INTM1_LKR_SHIFT) +#define SM5502_REG_INTM1_OVP_EVENT_MASK (0x1 << SM5502_REG_INTM1_OVP_EVENT_SHIFT) +#define SM5502_REG_INTM1_OCP_EVENT_MASK (0x1 << SM5502_REG_INTM1_OCP_EVENT_SHIFT) +#define SM5502_REG_INTM1_OVP_OCP_DIS_MASK (0x1 << SM5502_REG_INTM1_OVP_OCP_DIS_SHIFT) + +#define SM5502_REG_INTM2_VBUS_DET_SHIFT 0 +#define SM5502_REG_INTM2_REV_ACCE_SHIFT 1 +#define SM5502_REG_INTM2_ADC_CHG_SHIFT 2 +#define SM5502_REG_INTM2_STUCK_KEY_SHIFT 3 +#define SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT 4 +#define SM5502_REG_INTM2_MHL_SHIFT 5 +#define SM5502_REG_INTM2_VBUS_DET_MASK (0x1 << SM5502_REG_INTM2_VBUS_DET_SHIFT) +#define SM5502_REG_INTM2_REV_ACCE_MASK (0x1 << SM5502_REG_INTM2_REV_ACCE_SHIFT) +#define SM5502_REG_INTM2_ADC_CHG_MASK (0x1 << SM5502_REG_INTM2_ADC_CHG_SHIFT) +#define SM5502_REG_INTM2_STUCK_KEY_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_SHIFT) +#define SM5502_REG_INTM2_STUCK_KEY_RCV_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT) +#define SM5502_REG_INTM2_MHL_MASK (0x1 << SM5502_REG_INTM2_MHL_SHIFT) + +#define SM5502_REG_ADC_SHIFT 0 +#define SM5502_REG_ADC_MASK (0x1f << SM5502_REG_ADC_SHIFT) + +#define SM5502_REG_TIMING_SET1_KEY_PRESS_SHIFT 4 +#define SM5502_REG_TIMING_SET1_KEY_PRESS_MASK (0xf << SM5502_REG_TIMING_SET1_KEY_PRESS_SHIFT) +#define TIMING_KEY_PRESS_100MS 0x0 +#define TIMING_KEY_PRESS_200MS 0x1 +#define TIMING_KEY_PRESS_300MS 0x2 +#define TIMING_KEY_PRESS_400MS 0x3 +#define TIMING_KEY_PRESS_500MS 0x4 +#define TIMING_KEY_PRESS_600MS 0x5 +#define TIMING_KEY_PRESS_700MS 0x6 +#define TIMING_KEY_PRESS_800MS 0x7 +#define TIMING_KEY_PRESS_900MS 0x8 +#define TIMING_KEY_PRESS_1000MS 0x9 +#define SM5502_REG_TIMING_SET1_ADC_DET_SHIFT 0 +#define SM5502_REG_TIMING_SET1_ADC_DET_MASK (0xf << SM5502_REG_TIMING_SET1_ADC_DET_SHIFT) +#define TIMING_ADC_DET_50MS 0x0 +#define TIMING_ADC_DET_100MS 0x1 +#define TIMING_ADC_DET_150MS 0x2 +#define TIMING_ADC_DET_200MS 0x3 +#define TIMING_ADC_DET_300MS 0x4 +#define TIMING_ADC_DET_400MS 0x5 +#define TIMING_ADC_DET_500MS 0x6 +#define TIMING_ADC_DET_600MS 0x7 +#define TIMING_ADC_DET_700MS 0x8 +#define TIMING_ADC_DET_800MS 0x9 +#define TIMING_ADC_DET_900MS 0xA +#define TIMING_ADC_DET_1000MS 0xB + +#define SM5502_REG_TIMING_SET2_SW_WAIT_SHIFT 4 +#define SM5502_REG_TIMING_SET2_SW_WAIT_MASK (0xf << SM5502_REG_TIMING_SET2_SW_WAIT_SHIFT) +#define TIMING_SW_WAIT_10MS 0x0 +#define TIMING_SW_WAIT_30MS 0x1 +#define TIMING_SW_WAIT_50MS 0x2 +#define TIMING_SW_WAIT_70MS 0x3 +#define TIMING_SW_WAIT_90MS 0x4 +#define TIMING_SW_WAIT_110MS 0x5 +#define TIMING_SW_WAIT_130MS 0x6 +#define TIMING_SW_WAIT_150MS 0x7 +#define TIMING_SW_WAIT_170MS 0x8 +#define TIMING_SW_WAIT_190MS 0x9 +#define TIMING_SW_WAIT_210MS 0xA +#define SM5502_REG_TIMING_SET2_LONG_KEY_SHIFT 0 +#define SM5502_REG_TIMING_SET2_LONG_KEY_MASK (0xf << SM5502_REG_TIMING_SET2_LONG_KEY_SHIFT) +#define TIMING_LONG_KEY_300MS 0x0 +#define TIMING_LONG_KEY_400MS 0x1 +#define TIMING_LONG_KEY_500MS 0x2 +#define TIMING_LONG_KEY_600MS 0x3 +#define TIMING_LONG_KEY_700MS 0x4 +#define TIMING_LONG_KEY_800MS 0x5 +#define TIMING_LONG_KEY_900MS 0x6 +#define TIMING_LONG_KEY_1000MS 0x7 +#define TIMING_LONG_KEY_1100MS 0x8 +#define TIMING_LONG_KEY_1200MS 0x9 +#define TIMING_LONG_KEY_1300MS 0xA +#define TIMING_LONG_KEY_1400MS 0xB +#define TIMING_LONG_KEY_1500MS 0xC + +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_SHIFT 0 +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE2_SHIFT 1 +#define SM5502_REG_DEV_TYPE1_USB_SDP_SHIFT 2 +#define SM5502_REG_DEV_TYPE1_UART_SHIFT 3 +#define SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_SHIFT 4 +#define SM5502_REG_DEV_TYPE1_USB_CHG_SHIFT 5 +#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT 6 +#define SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT 7 +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_MASK (0x1 << SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_SHIFT) +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1__MASK (0x1 << SM5502_REG_DEV_TYPE1_AUDIO_TYPE2_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_SDP_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_SDP_SHIFT) +#define SM5502_REG_DEV_TYPE1_UART_MASK (0x1 << SM5502_REG_DEV_TYPE1_UART_SHIFT) +#define SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_MASK (0x1 << SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_CHG_SHIFT) +#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_OTG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT) + +#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT 0 +#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT 1 +#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT 2 +#define SM5502_REG_DEV_TYPE2_JIG_UART_OFF_SHIFT 3 +#define SM5502_REG_DEV_TYPE2_PPD_SHIFT 4 +#define SM5502_REG_DEV_TYPE2_TTY_SHIFT 5 +#define SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT 6 +#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_UART_OFF_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_UART_OFF_SHIFT) +#define SM5502_REG_DEV_TYPE2_PPD_MASK (0x1 << SM5502_REG_DEV_TYPE2_PPD_SHIFT) +#define SM5502_REG_DEV_TYPE2_TTY_MASK (0x1 << SM5502_REG_DEV_TYPE2_TTY_SHIFT) +#define SM5502_REG_DEV_TYPE2_AV_CABLE_MASK (0x1 << SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT) + +/* SM5502 Interrupts */ +enum sm5502_irq { + /* INT1 */ + SM5502_IRQ_INT1_ATTACH, + SM5502_IRQ_INT1_DETACH, + SM5502_IRQ_INT1_KP, + SM5502_IRQ_INT1_LKP, + SM5502_IRQ_INT1_LKR, + SM5502_IRQ_INT1_OVP_EVENT, + SM5502_IRQ_INT1_OCP_EVENT, + SM5502_IRQ_INT1_OVP_OCP_DIS, + + /* INT2 */ + SM5502_IRQ_INT2_VBUS_DET, + SM5502_IRQ_INT2_REV_ACCE, + SM5502_IRQ_INT2_ADC_CHG, + SM5502_IRQ_INT2_STUCK_KEY, + SM5502_IRQ_INT2_STUCK_KEY_RCV, + SM5502_IRQ_INT2_MHL, + + SM5502_IRQ_NUM, +}; + +#define SM5502_IRQ_INT1_ATTACH_MASK BIT(0) +#define SM5502_IRQ_INT1_DETACH_MASK BIT(1) +#define SM5502_IRQ_INT1_KP_MASK BIT(2) +#define SM5502_IRQ_INT1_LKP_MASK BIT(3) +#define SM5502_IRQ_INT1_LKR_MASK BIT(4) +#define SM5502_IRQ_INT1_OVP_EVENT_MASK BIT(5) +#define SM5502_IRQ_INT1_OCP_EVENT_MASK BIT(6) +#define SM5502_IRQ_INT1_OVP_OCP_DIS_MASK BIT(7) +#define SM5502_IRQ_INT2_VBUS_DET_MASK BIT(0) +#define SM5502_IRQ_INT2_REV_ACCE_MASK BIT(1) +#define SM5502_IRQ_INT2_ADC_CHG_MASK BIT(2) +#define SM5502_IRQ_INT2_STUCK_KEY_MASK BIT(3) +#define SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK BIT(4) +#define SM5502_IRQ_INT2_MHL_MASK BIT(5) + +#endif /* __LINUX_EXTCON_SM5502_H */ -- cgit v1.2.3-71-gd317 From a75fed2ee6c187ab32b1cb01882c1032c4c9e4a8 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Wed, 28 May 2014 15:35:29 +0900 Subject: extcon: sm5502: Change internal hardware switch according to cable type This patch changes internal hardware DP_CON/DM_CON switch according to cable type. The SM5502 MUIC device can set hardware switch as following: - OPEN (not connected state) / USB / UART / AUDIO Also, this patch set VBUSIN switch according to cable type. Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon-sm5502.c | 78 +++++++++++++++++++++++++++++++++++++++--- include/linux/extcon/sm5502.h | 23 +++++++++++++ 2 files changed, 96 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c index a32d40f97ff0..560d7dccec7b 100644 --- a/drivers/extcon/extcon-sm5502.c +++ b/drivers/extcon/extcon-sm5502.c @@ -228,6 +228,61 @@ static const struct regmap_config sm5502_muic_regmap_config = { .max_register = SM5502_REG_END, }; +/* Change DM_CON/DP_CON/VBUSIN switch according to cable type */ +static int sm5502_muic_set_path(struct sm5502_muic_info *info, + unsigned int con_sw, unsigned int vbus_sw, + bool attached) +{ + int ret; + + if (!attached) { + con_sw = DM_DP_SWITCH_OPEN; + vbus_sw = VBUSIN_SWITCH_OPEN; + } + + switch (con_sw) { + case DM_DP_SWITCH_OPEN: + case DM_DP_SWITCH_USB: + case DM_DP_SWITCH_AUDIO: + case DM_DP_SWITCH_UART: + ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1, + SM5502_REG_MANUAL_SW1_DP_MASK | + SM5502_REG_MANUAL_SW1_DM_MASK, + con_sw); + if (ret < 0) { + dev_err(info->dev, + "cannot update DM_CON/DP_CON switch\n"); + return ret; + } + break; + default: + dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n", + con_sw); + return -EINVAL; + }; + + switch (vbus_sw) { + case VBUSIN_SWITCH_OPEN: + case VBUSIN_SWITCH_VBUSOUT: + case VBUSIN_SWITCH_MIC: + case VBUSIN_SWITCH_VBUSOUT_WITH_USB: + ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1, + SM5502_REG_MANUAL_SW1_VBUSIN_MASK, + vbus_sw); + if (ret < 0) { + dev_err(info->dev, + "cannot update VBUSIN switch\n"); + return ret; + } + break; + default: + dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw); + return -EINVAL; + }; + + return 0; +} + /* Return cable type of attached or detached accessories */ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info) { @@ -329,7 +384,10 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND; const char **cable_names = info->edev->supported_cable; unsigned int cable_type = SM5502_MUIC_ADC_GROUND; + unsigned int con_sw = DM_DP_SWITCH_OPEN; + unsigned int vbus_sw = VBUSIN_SWITCH_OPEN; unsigned int idx = 0; + int ret; if (!cable_names) return 0; @@ -343,15 +401,19 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, switch (cable_type) { case SM5502_MUIC_ADC_OPEN_USB: - idx = EXTCON_CABLE_USB; + idx = EXTCON_CABLE_USB; + con_sw = DM_DP_SWITCH_USB; + vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB; break; case SM5502_MUIC_ADC_OPEN_TA: - idx = EXTCON_CABLE_TA; + idx = EXTCON_CABLE_TA; + con_sw = DM_DP_SWITCH_OPEN; + vbus_sw = VBUSIN_SWITCH_VBUSOUT; break; case SM5502_MUIC_ADC_OPEN_USB_OTG: - idx = EXTCON_CABLE_USB_HOST; - break; - case SM5502_MUIC_ADC_GROUND: + idx = EXTCON_CABLE_USB_HOST; + con_sw = DM_DP_SWITCH_USB; + vbus_sw = VBUSIN_SWITCH_OPEN; break; default: dev_dbg(info->dev, @@ -359,6 +421,12 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, return 0; }; + /* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */ + ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached); + if (ret < 0) + return ret; + + /* Change the state of external accessory */ extcon_set_cable_state(info->edev, cable_names[idx], attached); return 0; diff --git a/include/linux/extcon/sm5502.h b/include/linux/extcon/sm5502.h index 17bd6550c485..030526bf8d79 100644 --- a/include/linux/extcon/sm5502.h +++ b/include/linux/extcon/sm5502.h @@ -223,6 +223,29 @@ enum sm5502_reg { #define SM5502_REG_DEV_TYPE2_TTY_MASK (0x1 << SM5502_REG_DEV_TYPE2_TTY_SHIFT) #define SM5502_REG_DEV_TYPE2_AV_CABLE_MASK (0x1 << SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT) +#define SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT 0 +#define SM5502_REG_MANUAL_SW1_DP_SHIFT 2 +#define SM5502_REG_MANUAL_SW1_DM_SHIFT 5 +#define SM5502_REG_MANUAL_SW1_VBUSIN_MASK (0x3 << SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT) +#define SM5502_REG_MANUAL_SW1_DP_MASK (0x7 << SM5502_REG_MANUAL_SW1_DP_SHIFT) +#define SM5502_REG_MANUAL_SW1_DM_MASK (0x7 << SM5502_REG_MANUAL_SW1_DM_SHIFT) +#define VBUSIN_SWITCH_OPEN 0x0 +#define VBUSIN_SWITCH_VBUSOUT 0x1 +#define VBUSIN_SWITCH_MIC 0x2 +#define VBUSIN_SWITCH_VBUSOUT_WITH_USB 0x3 +#define DM_DP_CON_SWITCH_OPEN 0x0 +#define DM_DP_CON_SWITCH_USB 0x1 +#define DM_DP_CON_SWITCH_AUDIO 0x2 +#define DM_DP_CON_SWITCH_UART 0x3 +#define DM_DP_SWITCH_OPEN ((DM_DP_CON_SWITCH_OPEN <