From 23cde4d65cc7d11e2048d2b240cdf13927ac50d0 Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Wed, 19 Jun 2013 09:28:00 +0100 Subject: iio: Added ST-sensors platform data to select the DRDY interrupt pin This patch add support to redirect the DRDY interrupt on INT1 or INT2 on accelerometer and pressure sensors. Signed-off-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 14 +++++++++++--- include/linux/platform_data/st_sensors_pdata.h | 24 ++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 3 deletions(-) create mode 100644 include/linux/platform_data/st_sensors_pdata.h (limited to 'include/linux') diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 72b26940730d..e51f65480ea5 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -17,6 +17,8 @@ #include #include +#include + #define ST_SENSORS_TX_MAX_LENGTH 2 #define ST_SENSORS_RX_MAX_LENGTH 6 @@ -118,14 +120,16 @@ struct st_sensor_bdu { /** * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt * @addr: address of the register. - * @mask: mask to write the on/off value. + * @mask_int1: mask to enable/disable IRQ on INT1 pin. + * @mask_int2: mask to enable/disable IRQ on INT2 pin. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. */ struct st_sensor_data_ready_irq { u8 addr; - u8 mask; + u8 mask_int1; + u8 mask_int2; struct { u8 en_addr; u8 en_mask; @@ -201,6 +205,7 @@ struct st_sensors { * @buffer_data: Data used by buffer part. * @odr: Output data rate of the sensor [Hz]. * num_data_channels: Number of data channels used in buffer. + * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). * @get_irq_data_ready: Function to get the IRQ used for data ready signal. * @tf: Transfer function structure used by I/O operations. * @tb: Transfer buffers and mutex used by I/O operations. @@ -219,6 +224,8 @@ struct st_sensor_data { unsigned int odr; unsigned int num_data_channels; + u8 drdy_int_pin; + unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev); const struct st_sensor_transfer_function *tf; @@ -249,7 +256,8 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) } #endif -int st_sensors_init_sensor(struct iio_dev *indio_dev); +int st_sensors_init_sensor(struct iio_dev *indio_dev, + struct st_sensors_platform_data *pdata); int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable); diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h new file mode 100644 index 000000000000..753839187ba0 --- /dev/null +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -0,0 +1,24 @@ +/* + * STMicroelectronics sensors platform-data driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_PDATA_H +#define ST_SENSORS_PDATA_H + +/** + * struct st_sensors_platform_data - Platform data for the ST sensors + * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). + * Available only for accelerometer and pressure sensors. + * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). + */ +struct st_sensors_platform_data { + u8 drdy_int_pin; +}; + +#endif /* ST_SENSORS_PDATA_H */ -- cgit v1.2.3-71-gd317 From 60b188f0d679656a1a2603d3bc1fa005373f4b9c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 16 Jul 2013 16:08:00 +0100 Subject: iio: Remove IIO_DEV_ATTR_RESET macro There are no users of this macro left and we have come to the conclusion that it is not a good idea to expose the raw chip reset to userspace so the macro is very unlikely to be used in new drivers. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/sysfs.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h index b7a934b9431b..2958c960003a 100644 --- a/include/linux/iio/sysfs.h +++ b/include/linux/iio/sysfs.h @@ -73,11 +73,6 @@ struct iio_const_attr { .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)} /* Generic attributes of onetype or another */ -/** - * IIO_DEV_ATTR_RESET: resets the device - **/ -#define IIO_DEV_ATTR_RESET(_store) \ - IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, _store, 0) /** * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency -- cgit v1.2.3-71-gd317 From 9dabaf5eddbafa21aded7c063cb38d2e8936c237 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 18 Jul 2013 11:19:00 +0100 Subject: iio: core: implement devm_iio_device_alloc/devm_iio_device_free Add a resource managed devm_iio_device_alloc()/devm_iio_device_free() to automatically clean up any allocations made by IIO drivers, thus leading to simplified IIO drivers code. In addition, this will allow IIO drivers to use other devm_*() API (like devm_request_irq) and don't care about the race between iio_device_free() and the release of resources by Device core during driver removing. Signed-off-by: Grygorii Strashko Signed-off-by: Oleksandr Kravchenko Tested-by: Oleksandr Kravchenko Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-core.c | 47 +++++++++++++++++++++++++++++++++++++++++ include/linux/iio/iio.h | 25 ++++++++++++++++++++++ 2 files changed, 72 insertions(+) (limited to 'include/linux') diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index e145931ef1b8..d56d1229e2d6 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -912,6 +912,53 @@ void iio_device_free(struct iio_dev *dev) } EXPORT_SYMBOL(iio_device_free); +static void devm_iio_device_release(struct device *dev, void *res) +{ + iio_device_free(*(struct iio_dev **)res); +} + +static int devm_iio_device_match(struct device *dev, void *res, void *data) +{ + struct iio_dev **r = res; + if (!r || !*r) { + WARN_ON(!r || !*r); + return 0; + } + return *r == data; +} + +struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv) +{ + struct iio_dev **ptr, *iio_dev; + + ptr = devres_alloc(devm_iio_device_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return NULL; + + /* use raw alloc_dr for kmalloc caller tracing */ + iio_dev = iio_device_alloc(sizeof_priv); + if (iio_dev) { + *ptr = iio_dev; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return iio_dev; +} +EXPORT_SYMBOL_GPL(devm_iio_device_alloc); + +void devm_iio_device_free(struct device *dev, struct iio_dev *iio_dev) +{ + int rc; + + rc = devres_release(dev, devm_iio_device_release, + devm_iio_device_match, iio_dev); + WARN_ON(rc); +} +EXPORT_SYMBOL_GPL(devm_iio_device_free); + /** * iio_chrdev_open() - chrdev file open for buffer access and ioctls **/ diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3d35b7023591..61d220f89aca 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -531,6 +531,31 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv) **/ void iio_device_free(struct iio_dev *indio_dev); +/** + * devm_iio_device_alloc - Resource-managed iio_device_alloc() + * @dev: Device to allocate iio_dev for + * @sizeof_priv: Space to allocate for private structure. + * + * Managed iio_device_alloc. iio_dev allocated with this function is + * automatically freed on driver detach. + * + * If an iio_dev allocated with this function needs to be freed separately, + * devm_iio_device_free() must be used. + * + * RETURNS: + * Pointer to allocated iio_dev on success, NULL on failure. + */ +struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv); + +/** + * devm_iio_device_free - Resource-managed iio_device_free() + * @dev: Device this iio_dev belongs to + * @indio_dev: the iio_dev associated with the device + * + * Free indio_dev allocated with devm_iio_device_alloc(). + */ +void devm_iio_device_free(struct device *dev, struct iio_dev *iio_dev); + /** * iio_buffer_enabled() - helper function to test if the buffer is enabled * @indio_dev: IIO device structure for device -- cgit v1.2.3-71-gd317 From 9bc541028b2b93962e0bebce62ce6e295aab2086 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 29 Jul 2013 22:35:00 +0100 Subject: iio: Fix documentation of devm_iio_device_free() Signed-off-by: Peter Meerwald Cc: Grygorii Strashko Cc: Oleksandr Kravchenko Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 61d220f89aca..09ebe0a4d8e6 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -552,9 +552,9 @@ struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv); * @dev: Device this iio_dev belongs to * @indio_dev: the iio_dev associated with the device * - * Free indio_dev allocated with devm_iio_device_alloc(). + * Free iio_dev allocated with devm_iio_device_alloc(). */ -void devm_iio_device_free(struct device *dev, struct iio_dev *iio_dev); +void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev); /** * iio_buffer_enabled() - helper function to test if the buffer is enabled -- cgit v1.2.3-71-gd317 From 98d4f93c79b002f85480320fe63fefaa31d58b6c Mon Sep 17 00:00:00 2001 From: Jens Frederich Date: Thu, 15 Aug 2013 21:34:55 +0200 Subject: Staging: olpc_dcon: replace some magic numbers This patch replace some magic numbers. I believe it makes the driver more readable. The magic number 0x26 is the XO system embedded controller (EC) command 'DCON power enable/disable'. Number 0x41, and 0x42 are special memory controller settings register. The 0x41 initialize bit sequence 0x101 means: enable memory power down function and special SDRAM clock delay for synchronize SDRAM output and clock signal. The 0x42 initialize squence 0x101 is wrong. According to the specification Bit 8 is reserved, thus not in use. I removed it. Signed-off-by: Jens Frederich Signed-off-by: Greg Kroah-Hartman --- drivers/staging/olpc_dcon/olpc_dcon.c | 13 +++++++------ drivers/staging/olpc_dcon/olpc_dcon.h | 27 ++++++++++++++++++--------- include/linux/olpc-ec.h | 1 + 3 files changed, 26 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 7c460f2c0d23..5ca4fa4fd246 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -90,9 +90,10 @@ static int dcon_hw_init(struct dcon_priv *dcon, int is_init) /* SDRAM setup/hold time */ dcon_write(dcon, 0x3a, 0xc040); - dcon_write(dcon, 0x41, 0x0000); - dcon_write(dcon, 0x41, 0x0101); - dcon_write(dcon, 0x42, 0x0101); + dcon_write(dcon, DCON_REG_MEM_OPT_A, 0x0000); /* clear option bits */ + dcon_write(dcon, DCON_REG_MEM_OPT_A, + MEM_DLL_CLOCK_DELAY | MEM_POWER_DOWN); + dcon_write(dcon, DCON_REG_MEM_OPT_B, MEM_SOFT_RESET); /* Colour swizzle, AA, no passthrough, backlight */ if (is_init) { @@ -126,7 +127,7 @@ static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down) power_up: if (is_powered_down) { x = 1; - x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); if (x) { pr_warn("unable to force dcon to power up: %d!\n", x); return x; @@ -144,7 +145,7 @@ power_up: pr_err("unable to stabilize dcon's smbus, reasserting power and praying.\n"); BUG_ON(olpc_board_at_least(olpc_board(0xc2))); x = 0; - olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); msleep(100); is_powered_down = 1; goto power_up; /* argh, stupid hardware.. */ @@ -208,7 +209,7 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep) if (sleep) { x = 0; - x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); if (x) pr_warn("unable to force dcon to power down: %d!\n", x); else diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h index 997bded2949f..524ee49fbacb 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.h +++ b/drivers/staging/olpc_dcon/olpc_dcon.h @@ -22,15 +22,24 @@ #define MODE_DEBUG (1<<14) #define MODE_SELFTEST (1<<15) -#define DCON_REG_HRES 2 -#define DCON_REG_HTOTAL 3 -#define DCON_REG_HSYNC_WIDTH 4 -#define DCON_REG_VRES 5 -#define DCON_REG_VTOTAL 6 -#define DCON_REG_VSYNC_WIDTH 7 -#define DCON_REG_TIMEOUT 8 -#define DCON_REG_SCAN_INT 9 -#define DCON_REG_BRIGHT 10 +#define DCON_REG_HRES 0x2 +#define DCON_REG_HTOTAL 0x3 +#define DCON_REG_HSYNC_WIDTH 0x4 +#define DCON_REG_VRES 0x5 +#define DCON_REG_VTOTAL 0x6 +#define DCON_REG_VSYNC_WIDTH 0x7 +#define DCON_REG_TIMEOUT 0x8 +#define DCON_REG_SCAN_INT 0x9 +#define DCON_REG_BRIGHT 0x10 +#define DCON_REG_MEM_OPT_A 0x41 +#define DCON_REG_MEM_OPT_B 0x42 + +/* Load Delay Locked Loop (DLL) settings for clock delay */ +#define MEM_DLL_CLOCK_DELAY (1<<0) +/* Memory controller power down function */ +#define MEM_POWER_DOWN (1<<8) +/* Memory controller software reset */ +#define MEM_SOFT_RESET (1<<0) /* Status values */ diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h index 5bb6e760aa61..2925df3ce78a 100644 --- a/include/linux/olpc-ec.h +++ b/include/linux/olpc-ec.h @@ -6,6 +6,7 @@ #define EC_WRITE_SCI_MASK 0x1b #define EC_WAKE_UP_WLAN 0x24 #define EC_WLAN_LEAVE_RESET 0x25 +#define EC_DCON_POWER_MODE 0x26 #define EC_READ_EB_MODE 0x2a #define EC_SET_SCI_INHIBIT 0x32 #define EC_SET_SCI_INHIBIT_RELEASE 0x34 -- cgit v1.2.3-71-gd317 From d536321df392ee0db6a5e92d98f0303020315f40 Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Fri, 16 Aug 2013 14:11:00 +0100 Subject: iio: trigger: implement devm_iio_trigger_alloc/devm_iio_triger_free Add a resource managed devm_iio_trigger_alloc()/devm_iio_triger_free() to automatically clean up triggers allocated by IIO drivers, thus leading to simplified IIO drivers code. Signed-off-by: Jacek Anaszewski Signed-off-by: Kyunmin Park Signed-off-by: Jonathan Cameron --- Documentation/driver-model/devres.txt | 2 + drivers/iio/industrialio-trigger.c | 72 +++++++++++++++++++++++++++++++++-- include/linux/iio/iio.h | 29 ++++++++++++++ 3 files changed, 99 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 1d3233292989..fb57d85e7316 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -240,6 +240,8 @@ MEM IIO devm_iio_device_alloc() devm_iio_device_free() + devm_iio_trigger_alloc() + devm_iio_trigger_free() IO region devm_request_region() diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index 0dd9bb873130..bf5e70a32d3f 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -424,9 +424,8 @@ static void iio_trig_subirqunmask(struct irq_data *d) trig->subirqs[d->irq - trig->subirq_base].enabled = true; } -struct iio_trigger *iio_trigger_alloc(const char *fmt, ...) +static struct iio_trigger *viio_trigger_alloc(const char *fmt, va_list vargs) { - va_list vargs; struct iio_trigger *trig; trig = kzalloc(sizeof *trig, GFP_KERNEL); if (trig) { @@ -444,9 +443,8 @@ struct iio_trigger *iio_trigger_alloc(const char *fmt, ...) kfree(trig); return NULL; } - va_start(vargs, fmt); + trig->name = kvasprintf(GFP_KERNEL, fmt, vargs); - va_end(vargs); if (trig->name == NULL) { irq_free_descs(trig->subirq_base, CONFIG_IIO_CONSUMERS_PER_TRIGGER); @@ -467,6 +465,19 @@ struct iio_trigger *iio_trigger_alloc(const char *fmt, ...) } get_device(&trig->dev); } + + return trig; +} + +struct iio_trigger *iio_trigger_alloc(const char *fmt, ...) +{ + struct iio_trigger *trig; + va_list vargs; + + va_start(vargs, fmt); + trig = viio_trigger_alloc(fmt, vargs); + va_end(vargs); + return trig; } EXPORT_SYMBOL(iio_trigger_alloc); @@ -478,6 +489,59 @@ void iio_trigger_free(struct iio_trigger *trig) } EXPORT_SYMBOL(iio_trigger_free); +static void devm_iio_trigger_release(struct device *dev, void *res) +{ + iio_trigger_free(*(struct iio_trigger **)res); +} + +static int devm_iio_trigger_match(struct device *dev, void *res, void *data) +{ + struct iio_trigger **r = res; + + if (!r || !*r) { + WARN_ON(!r || !*r); + return 0; + } + + return *r == data; +} + +struct iio_trigger *devm_iio_trigger_alloc(struct device *dev, + const char *fmt, ...) +{ + struct iio_trigger **ptr, *trig; + va_list vargs; + + ptr = devres_alloc(devm_iio_trigger_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return NULL; + + /* use raw alloc_dr for kmalloc caller tracing */ + va_start(vargs, fmt); + trig = viio_trigger_alloc(fmt, vargs); + va_end(vargs); + if (trig) { + *ptr = trig; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return trig; +} +EXPORT_SYMBOL_GPL(devm_iio_trigger_alloc); + +void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig) +{ + int rc; + + rc = devres_release(dev, devm_iio_trigger_release, + devm_iio_trigger_match, iio_trig); + WARN_ON(rc); +} +EXPORT_SYMBOL_GPL(devm_iio_trigger_free); + void iio_device_register_trigger_consumer(struct iio_dev *indio_dev) { indio_dev->groups[indio_dev->groupcounter++] = diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 09ebe0a4d8e6..2103cc32a5fb 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -556,6 +556,35 @@ struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv); */ void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev); +/** + * devm_iio_trigger_alloc - Resource-managed iio_trigger_alloc() + * @dev: Device to allocate iio_trigger for + * @fmt: trigger name format. If it includes format + * specifiers, the additional arguments following + * format are formatted and inserted in the resulting + * string replacing their respective specifiers. + * + * Managed iio_trigger_alloc. iio_trigger allocated with this function is + * automatically freed on driver detach. + * + * If an iio_trigger allocated with this function needs to be freed separately, + * devm_iio_trigger_free() must be used. + * + * RETURNS: + * Pointer to allocated iio_trigger on success, NULL on failure. + */ +struct iio_trigger *devm_iio_trigger_alloc(struct device *dev, + const char *fmt, ...); + +/** + * devm_iio_trigger_free - Resource-managed iio_trigger_free() + * @dev: Device this iio_dev belongs to + * @iio_trig: the iio_trigger associated with the device + * + * Free iio_trigger allocated with devm_iio_trigger_alloc(). + */ +void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig); + /** * iio_buffer_enabled() - helper function to test if the buffer is enabled * @indio_dev: IIO device structure for device -- cgit v1.2.3-71-gd317 From 9120c0bea999cc26c3493486828d34138a7ac901 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Tue, 27 Aug 2013 12:28:00 +0100 Subject: iio: at91: Use different prescal, startup mask in MR for different IP For at91 boards, there are different IPs for adc. Different IPs has different STARTUP & PRESCAL mask in ADC_MR. Signed-off-by: Josh Wu Acked-by: Maxime Ripard Signed-off-by: Jonathan Cameron --- arch/arm/mach-at91/include/mach/at91_adc.h | 7 +++++-- drivers/iio/adc/at91_adc.c | 11 +++++++++-- include/linux/platform_data/at91_adc.h | 4 ++++ 3 files changed, 18 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h index bea1a2021d1e..048a57f76bd3 100644 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ b/arch/arm/mach-at91/include/mach/at91_adc.h @@ -28,9 +28,12 @@ #define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) #define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ #define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9G45 (0xff << 8) #define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9G45 (0x7f << 16) +#define AT91_ADC_STARTUP_9X5 (0xf << 16) #define AT91_ADC_STARTUP_(x) ((x) << 16) #define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ #define AT91_ADC_SHTIM_(x) ((x) << 24) diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index ed5eebc93bb7..84be63bdf038 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -672,8 +672,8 @@ static int at91_adc_probe(struct platform_device *pdev) shtim = round_up((st->sample_hold_time * adc_clk / 1000000) - 1, 1); - reg = AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL; - reg |= AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP; + reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask; + reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask; if (st->low_res) reg |= AT91_ADC_LOWRES; if (st->sleep_mode) @@ -746,6 +746,8 @@ static struct at91_adc_caps at91sam9260_caps = { .drdy_mask = AT91_ADC_DRDY, .status_register = AT91_ADC_SR, .trigger_register = AT91_ADC_TRGR_9260, + .mr_prescal_mask = AT91_ADC_PRESCAL_9260, + .mr_startup_mask = AT91_ADC_STARTUP_9260, }, }; @@ -755,6 +757,8 @@ static struct at91_adc_caps at91sam9g45_caps = { .drdy_mask = AT91_ADC_DRDY, .status_register = AT91_ADC_SR, .trigger_register = AT91_ADC_TRGR_9G45, + .mr_prescal_mask = AT91_ADC_PRESCAL_9G45, + .mr_startup_mask = AT91_ADC_STARTUP_9G45, }, }; @@ -764,6 +768,9 @@ static struct at91_adc_caps at91sam9x5_caps = { .drdy_mask = AT91_ADC_SR_DRDY_9X5, .status_register = AT91_ADC_SR_9X5, .trigger_register = AT91_ADC_TRGR_9X5, + /* prescal mask is same as 9G45 */ + .mr_prescal_mask = AT91_ADC_PRESCAL_9G45, + .mr_startup_mask = AT91_ADC_STARTUP_9X5, }, }; diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h index e15745b4f3a5..b3ca1e94e0c8 100644 --- a/include/linux/platform_data/at91_adc.h +++ b/include/linux/platform_data/at91_adc.h @@ -14,12 +14,16 @@ (Interruptions registers mostly) * @status_register: Offset of the Interrupt Status Register * @trigger_register: Offset of the Trigger setup register + * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register + * @mr_startup_mask: Mask of the STARTUP field in the adc MR register */ struct at91_adc_reg_desc { u8 channel_base; u32 drdy_mask; u8 status_register; u8 trigger_register; + u32 mr_prescal_mask; + u32 mr_startup_mask; }; /** -- cgit v1.2.3-71-gd317