From 5f867db63473f32cce1b868e281ebd42a41f8fad Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 26 Jun 2015 19:43:58 -0500 Subject: mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict Commit 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER using the same bit value as the existing NAND_BUSWIDTH_AUTO. Cc: Kamal Dasu Fixes: 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") Signed-off-by: Scott Wood Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index f25e2bdd188c..272f42952f34 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -177,11 +177,6 @@ typedef enum { #define NAND_OWN_BUFFERS 0x00020000 /* Chip may not exist, so silence any errors in scan */ #define NAND_SCAN_SILENT_NODEV 0x00040000 -/* - * This option could be defined by controller drivers to protect against - * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers - */ -#define NAND_USE_BOUNCE_BUFFER 0x00080000 /* * Autodetect nand buswidth with readid/onfi. * This suppose the driver will configure the hardware in 8 bits mode @@ -189,6 +184,11 @@ typedef enum { * before calling nand_scan_tail. */ #define NAND_BUSWIDTH_AUTO 0x00080000 +/* + * This option could be defined by controller drivers to protect against + * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers + */ +#define NAND_USE_BOUNCE_BUFFER 0x00100000 /* Options set by nand scan */ /* Nand scan has allocated controller struct */ -- cgit v1.2.3-71-gd317 From 4c62360d7562a20c996836d163259c87d9378120 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Tue, 30 Jun 2015 15:57:51 -0700 Subject: efi: Handle memory error structures produced based on old versions of standard The memory error record structure includes as its first field a bitmask of which subsequent fields are valid. The allows new fields to be added to the structure while keeping compatibility with older software that parses these records. This mechanism was used between versions 2.2 and 2.3 to add four new fields, growing the size of the structure from 73 bytes to 80. But Linux just added all the new fields so this test: if (gdata->error_data_length >= sizeof(*mem_err)) cper_print_mem(newpfx, mem_err); else goto err_section_too_small; now make Linux complain about old format records being too short. Add a definition for the old format of the structure and use that for the minimum size check. Pass the actual size to cper_print_mem() so it can sanity check the validation_bits field to ensure that if a BIOS using the old format sets bits as if it were new, we won't access fields beyond the end of the structure. Signed-off-by: Tony Luck Cc: Signed-off-by: Matt Fleming --- drivers/firmware/efi/cper.c | 15 ++++++++++++--- include/linux/cper.h | 22 +++++++++++++++++++++- 2 files changed, 33 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c index 4fd9961d552e..d42537425438 100644 --- a/drivers/firmware/efi/cper.c +++ b/drivers/firmware/efi/cper.c @@ -305,10 +305,17 @@ const char *cper_mem_err_unpack(struct trace_seq *p, return ret; } -static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem) +static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem, + int len) { struct cper_mem_err_compact cmem; + /* Don't trust UEFI 2.1/2.2 structure with bad validation bits */ + if (len == sizeof(struct cper_sec_mem_err_old) && + (mem->validation_bits & ~(CPER_MEM_VALID_RANK_NUMBER - 1))) { + pr_err(FW_WARN "valid bits set for fields beyond structure\n"); + return; + } if (mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS) printk("%s""error_status: 0x%016llx\n", pfx, mem->error_status); if (mem->validation_bits & CPER_MEM_VALID_PA) @@ -405,8 +412,10 @@ static void cper_estatus_print_section( } else if (!uuid_le_cmp(*sec_type, CPER_SEC_PLATFORM_MEM)) { struct cper_sec_mem_err *mem_err = (void *)(gdata + 1); printk("%s""section_type: memory error\n", newpfx); - if (gdata->error_data_length >= sizeof(*mem_err)) - cper_print_mem(newpfx, mem_err); + if (gdata->error_data_length >= + sizeof(struct cper_sec_mem_err_old)) + cper_print_mem(newpfx, mem_err, + gdata->error_data_length); else goto err_section_too_small; } else if (!uuid_le_cmp(*sec_type, CPER_SEC_PCIE)) { diff --git a/include/linux/cper.h b/include/linux/cper.h index 76abba4b238e..dcacb1a72e26 100644 --- a/include/linux/cper.h +++ b/include/linux/cper.h @@ -340,7 +340,27 @@ struct cper_ia_proc_ctx { __u64 mm_reg_addr; }; -/* Memory Error Section */ +/* Old Memory Error Section UEFI 2.1, 2.2 */ +struct cper_sec_mem_err_old { + __u64 validation_bits; + __u64 error_status; + __u64 physical_addr; + __u64 physical_addr_mask; + __u16 node; + __u16 card; + __u16 module; + __u16 bank; + __u16 device; + __u16 row; + __u16 column; + __u16 bit_pos; + __u64 requestor_id; + __u64 responder_id; + __u64 target_id; + __u8 error_type; +}; + +/* Memory Error Section UEFI >= 2.3 */ struct cper_sec_mem_err { __u64 validation_bits; __u64 error_status; -- cgit v1.2.3-71-gd317 From 71d126fd28de2d4d9b7b2088dbccd7ca62fad6e0 Mon Sep 17 00:00:00 2001 From: Arne Fitzenreiter Date: Wed, 15 Jul 2015 13:54:36 +0200 Subject: libata: add ATA_HORKAGE_NOTRIM Some devices lose data on TRIM whether queued or not. This patch adds a horkage to disable TRIM. tj: Collapsed unnecessary if() nesting. Signed-off-by: Arne Fitzenreiter Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-scsi.c | 3 ++- drivers/ata/libata-transport.c | 2 ++ include/linux/libata.h | 2 ++ 3 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3131adcc1f87..641a61a59e89 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2568,7 +2568,8 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[14] = (lowest_aligned >> 8) & 0x3f; rbuf[15] = lowest_aligned; - if (ata_id_has_trim(args->id)) { + if (ata_id_has_trim(args->id) && + !(dev->horkage & ATA_HORKAGE_NOTRIM)) { rbuf[14] |= 0x80; /* LBPME */ if (ata_id_has_zero_after_trim(args->id) && diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c index d6c37bcd416d..e2d94972962d 100644 --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -569,6 +569,8 @@ show_ata_dev_trim(struct device *dev, if (!ata_id_has_trim(ata_dev->id)) mode = "unsupported"; + else if (ata_dev->horkage & ATA_HORKAGE_NOTRIM) + mode = "forced_unsupported"; else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) mode = "forced_unqueued"; else if (ata_fpdma_dsm_supported(ata_dev)) diff --git a/include/linux/libata.h b/include/linux/libata.h index 36ce37bcc963..5c8bac6225a6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -431,6 +431,8 @@ enum { ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */ ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */ ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */ + ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */ + /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3-71-gd317 From af34d637637eabaf49406eb35c948cd51ba262a6 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Mon, 13 Jul 2015 11:48:23 -0500 Subject: libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e08), data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family) SATA controller. This patch will allow the driver to limit max_sectors as before # cat /sys/block/sdb/queue/max_sectors_kb 512 I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2 before seeing corruption, but seems safer to use previous limit. Without this patch max_sectors_kb will be 32767. tj: Minor comment update. Reported-by: Jeff Moyer Signed-off-by: David Milburn Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org # v3.19 and later Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap") --- drivers/ata/libata-core.c | 10 ++++++++++ include/linux/ata.h | 1 + include/linux/libata.h | 2 +- 3 files changed, 12 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ed2b218ea64d..68202a8a3a0b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2478,6 +2478,10 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); + if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024) + dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024, + dev->max_sectors); + if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48) dev->max_sectors = ATA_MAX_SECTORS_LBA48; @@ -4146,6 +4150,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, + /* + * Causes silent data corruption with higher max sects. + * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com + */ + { "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 }, + /* Devices we expect to fail diagnostics */ /* Devices where NCQ should be avoided */ diff --git a/include/linux/ata.h b/include/linux/ata.h index fed36418dd1c..6c78956aa470 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -45,6 +45,7 @@ enum { ATA_SECT_SIZE = 512, ATA_MAX_SECTORS_128 = 128, ATA_MAX_SECTORS = 256, + ATA_MAX_SECTORS_1024 = 1024, ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */ ATA_MAX_SECTORS_TAPE = 65535, diff --git a/include/linux/libata.h b/include/linux/libata.h index 5c8bac6225a6..c9cfbcdb8d14 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -432,7 +432,7 @@ enum { ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */ ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */ ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */ - + ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3-71-gd317 From a3bd4f989f532694337dd30538b635d5213ab86a Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 22 Jul 2015 20:53:09 +0800 Subject: mmc: sdhci-esdhc-imx: clear f_max in boarddata After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), it's not used anymore. Signed-off-by: Dong Aisheng Reviewed-by: Johan Derycke Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 7 +------ include/linux/platform_data/mmc-esdhc-imx.h | 1 - 2 files changed, 1 insertion(+), 7 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 1b0e61847e73..c6b9f6492e1a 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -581,13 +581,8 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct pltfm_imx_data *imx_data = pltfm_host->priv; - struct esdhc_platform_data *boarddata = &imx_data->boarddata; - if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock)) - return boarddata->f_max; - else - return pltfm_host->clock; + return pltfm_host->clock; } static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host) diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index 75f70f6ac137..e1571efa3f2b 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -43,7 +43,6 @@ struct esdhc_platform_data { enum wp_types wp_type; enum cd_types cd_type; int max_bus_width; - unsigned int f_max; bool support_vsel; unsigned int delay_line; }; -- cgit v1.2.3-71-gd317 From e3eea1404f5ff7a2ceb7b5e7ba412a6fd94f2935 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Fri, 24 Jul 2015 10:38:12 -0400 Subject: ftrace: Fix breakage of set_ftrace_pid Commit 4104d326b670 ("ftrace: Remove global function list and call function directly") simplified the ftrace code by removing the global_ops list with a new design. But this cleanup also broke the filtering of PIDs that are added to the set_ftrace_pid file. Add back the proper hooks to have pid filtering working once again. Cc: stable@vger.kernel.org # 3.16+ Reported-by: Matt Fleming Reported-by: Richard Weinberger Tested-by: Matt Fleming Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 3 +++ kernel/trace/ftrace.c | 52 +++++++++++++++++++++++++++++++++----------------- 2 files changed, 37 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 1da602982cf9..6cd8c0ee4b6f 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -116,6 +116,7 @@ ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops); * SAVE_REGS. If another ops with this flag set is already registered * for any of the functions that this ops will be registered for, then * this ops will fail to register or set_filter_ip. + * PID - Is affected by set_ftrace_pid (allows filtering on those pids) */ enum { FTRACE_OPS_FL_ENABLED = 1 << 0, @@ -132,6 +133,7 @@ enum { FTRACE_OPS_FL_MODIFYING = 1 << 11, FTRACE_OPS_FL_ALLOC_TRAMP = 1 << 12, FTRACE_OPS_FL_IPMODIFY = 1 << 13, + FTRACE_OPS_FL_PID = 1 << 14, }; #ifdef CONFIG_DYNAMIC_FTRACE @@ -159,6 +161,7 @@ struct ftrace_ops { struct ftrace_ops *next; unsigned long flags; void *private; + ftrace_func_t saved_func; int __percpu *disabled; #ifdef CONFIG_DYNAMIC_FTRACE int nr_trampolines; diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 02bece4a99ea..eb11011b5292 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -98,6 +98,13 @@ struct ftrace_pid { struct pid *pid; }; +static bool ftrace_pids_enabled(void) +{ + return !list_empty(&ftrace_pids); +} + +static void ftrace_update_trampoline(struct ftrace_ops *ops); + /* * ftrace_disabled is set when an anomaly is discovered. * ftrace_disabled is much stronger than ftrace_enabled. @@ -109,7 +116,6 @@ static DEFINE_MUTEX(ftrace_lock); static struct ftrace_ops *ftrace_control_list __read_mostly = &ftrace_list_end; static struct ftrace_ops *ftrace_ops_list __read_mostly = &ftrace_list_end; ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub; -ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub; static struct ftrace_ops global_ops; static struct ftrace_ops control_ops; @@ -183,14 +189,7 @@ static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip, if (!test_tsk_trace_trace(current)) return; - ftrace_pid_function(ip, parent_ip, op, regs); -} - -static void set_ftrace_pid_function(ftrace_func_t func) -{ - /* do not set ftrace_pid_function to itself! */ - if (func != ftrace_pid_func) - ftrace_pid_function = func; + op->saved_func(ip, parent_ip, op, regs); } /** @@ -202,7 +201,6 @@ static void set_ftrace_pid_function(ftrace_func_t func) void clear_ftrace_function(void) { ftrace_trace_function = ftrace_stub; - ftrace_pid_function = ftrace_stub; } static void control_ops_disable_all(struct ftrace_ops *ops) @@ -436,6 +434,12 @@ static int __register_ftrace_function(struct ftrace_ops *ops) } else add_ftrace_ops(&ftrace_ops_list, ops); + /* Always save the function, and reset at unregistering */ + ops->saved_func = ops->func; + + if (ops->flags & FTRACE_OPS_FL_PID && ftrace_pids_enabled()) + ops->func = ftrace_pid_func; + ftrace_update_trampoline(ops); if (ftrace_enabled) @@ -463,15 +467,28 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops) if (ftrace_enabled) update_ftrace_function(); + ops->func = ops->saved_func; + return 0; } static void ftrace_update_pid_func(void) { + bool enabled = ftrace_pids_enabled(); + struct ftrace_ops *op; + /* Only do something if we are tracing something */ if (ftrace_trace_function == ftrace_stub) return; + do_for_each_ftrace_op(op, ftrace_ops_list) { + if (op->flags & FTRACE_OPS_FL_PID) { + op->func = enabled ? ftrace_pid_func : + op->saved_func; + ftrace_update_trampoline(op); + } + } while_for_each_ftrace_op(op); + update_ftrace_function(); } @@ -1133,7 +1150,8 @@ static struct ftrace_ops global_ops = { .local_hash.filter_hash = EMPTY_HASH, INIT_OPS_HASH(global_ops) .flags = FTRACE_OPS_FL_RECURSION_SAFE | - FTRACE_OPS_FL_INITIALIZED, + FTRACE_OPS_FL_INITIALIZED | + FTRACE_OPS_FL_PID, }; /* @@ -5023,7 +5041,9 @@ static void ftrace_update_trampoline(struct ftrace_ops *ops) static struct ftrace_ops global_ops = { .func = ftrace_stub, - .flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_INITIALIZED, + .flags = FTRACE_OPS_FL_RECURSION_SAFE | + FTRACE_OPS_FL_INITIALIZED | + FTRACE_OPS_FL_PID, }; static int __init ftrace_nodyn_init(void) @@ -5080,11 +5100,6 @@ void ftrace_init_array_ops(struct trace_array *tr, ftrace_func_t func) if (WARN_ON(tr->ops->func != ftrace_stub)) printk("ftrace ops had %pS for function\n", tr->ops->func); - /* Only the top level instance does pid tracing */ - if (!list_empty(&ftrace_pids)) { - set_ftrace_pid_function(func); - func = ftrace_pid_func; - } } tr->ops->func = func; tr->ops->private = tr; @@ -5371,7 +5386,7 @@ static void *fpid_start(struct seq_file *m, loff_t *pos) { mutex_lock(&ftrace_lock); - if (list_empty(&ftrace_pids) && (!*pos)) + if (!ftrace_pids_enabled() && (!*pos)) return (void *) 1; return seq_list_start(&ftrace_pids, *pos); @@ -5610,6 +5625,7 @@ static struct ftrace_ops graph_ops = { .func = ftrace_stub, .flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_INITIALIZED | + FTRACE_OPS_FL_PID | FTRACE_OPS_FL_STUB, #ifdef FTRACE_GRAPH_TRAMP_ADDR .trampoline = FTRACE_GRAPH_TRAMP_ADDR, -- cgit v1.2.3-71-gd317