From 3806e94b0148350c72f9a3214274026b6ca03f49 Mon Sep 17 00:00:00 2001 From: Crane Cai Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: i2c-piix4: Modify code name SB900 to Hudson-2 Change SB900 to its formal code name Hudson-2. Signed-off-by: Crane Cai Signed-off-by: Jean Delvare --- include/linux/pci_ids.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b0f0f3851cd4..9ceb392cb984 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,7 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 -#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 -- cgit v1.2.3-71-gd317 From afa08974fe80c198b8650f73ed8ab59135ca10d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: i2c: Add an interface to lock/unlock an I2C bus segment Some drivers need to be able to prevent access to an I2C bus segment for a specific period of time. Add an interface for them to do so without twiddling with i2c-core internals. Signed-off-by: Jean Delvare Acked-by: Ben Hutchings --- drivers/net/sfc/sfe4001.c | 4 ++-- include/linux/i2c.h | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index cee00ad49b57..49eb91b5f50c 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx) efx_oword_t reg; /* GPIO 3 and the GPIO register are shared with I2C, so block that */ - mutex_lock(&efx->i2c_adap.bus_lock); + i2c_lock_adapter(&efx->i2c_adap); /* Pull RST_N (GPIO 2) low then let it up again, setting the * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the @@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx) falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1); - mutex_unlock(&efx->i2c_adap.bus_lock); + i2c_unlock_adapter(&efx->i2c_adap); ssleep(1); return 0; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 57d41b0abce2..7b40cda57a70 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) dev_set_drvdata(&dev->dev, data); } +/** + * i2c_lock_adapter - Prevent access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_lock_adapter(struct i2c_adapter *adapter) +{ + mutex_lock(&adapter->bus_lock); +} + +/** + * i2c_unlock_adapter - Reauthorize access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_unlock_adapter(struct i2c_adapter *adapter) +{ + mutex_unlock(&adapter->bus_lock); +} + /*flags for the client struct: */ #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ -- cgit v1.2.3-71-gd317 From fe8bc91c4c30122b357d197117705cfd4fabaf28 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 16 Oct 2009 19:26:15 +0200 Subject: ext3: Wait for proper transaction commit on fsync We cannot rely on buffer dirty bits during fsync because pdflush can come before fsync is called and clear dirty bits without forcing a transaction commit. What we do is that we track which transaction has last changed the inode and which transaction last changed allocation and force it to disk on fsync. Signed-off-by: Jan Kara Reviewed-by: Aneesh Kumar K.V --- fs/ext3/fsync.c | 36 ++++++++++++++++-------------------- fs/ext3/inode.c | 32 +++++++++++++++++++++++++++++++- fs/ext3/super.c | 2 ++ include/linux/ext3_fs_i.h | 8 ++++++++ 4 files changed, 57 insertions(+), 21 deletions(-) (limited to 'include/linux') diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index 451d166bbe93..8209f266e9ad 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -46,19 +46,21 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) { struct inode *inode = dentry->d_inode; + struct ext3_inode_info *ei = EXT3_I(inode); + journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; int ret = 0; + tid_t commit_tid; + + if (inode->i_sb->s_flags & MS_RDONLY) + return 0; J_ASSERT(ext3_journal_current_handle() == NULL); /* - * data=writeback: + * data=writeback,ordered: * The caller's filemap_fdatawrite()/wait will sync the data. - * sync_inode() will sync the metadata - * - * data=ordered: - * The caller's filemap_fdatawrite() will write the data and - * sync_inode() will write the inode if it is dirty. Then the caller's - * filemap_fdatawait() will wait on the pages. + * Metadata is in the journal, we wait for a proper transaction + * to commit here. * * data=journal: * filemap_fdatawrite won't do anything (the buffers are clean). @@ -73,22 +75,16 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) goto out; } - if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) - goto flush; + if (datasync) + commit_tid = atomic_read(&ei->i_datasync_tid); + else + commit_tid = atomic_read(&ei->i_sync_tid); - /* - * The VFS has written the file data. If the inode is unaltered - * then we need not start a commit. - */ - if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) { - struct writeback_control wbc = { - .sync_mode = WB_SYNC_ALL, - .nr_to_write = 0, /* sys_fsync did this */ - }; - ret = sync_inode(inode, &wbc); + if (log_start_commit(journal, commit_tid)) { + log_wait_commit(journal, commit_tid); goto out; } -flush: + /* * In case we didn't commit a transaction, we have to flush * disk caches manually so that data really is on persistent diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 069a163393b4..354ed3b47b30 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -699,8 +699,9 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, int err = 0; struct ext3_block_alloc_info *block_i; ext3_fsblk_t current_block; + struct ext3_inode_info *ei = EXT3_I(inode); - block_i = EXT3_I(inode)->i_block_alloc_info; + block_i = ei->i_block_alloc_info; /* * If we're splicing into a [td]indirect block (as opposed to the * inode) then we need to get write access to the [td]indirect block @@ -741,6 +742,8 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, inode->i_ctime = CURRENT_TIME_SEC; ext3_mark_inode_dirty(handle, inode); + /* ext3_mark_inode_dirty already updated i_sync_tid */ + atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); /* had we spliced it onto indirect block? */ if (where->bh) { @@ -2754,6 +2757,8 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) struct ext3_inode_info *ei; struct buffer_head *bh; struct inode *inode; + journal_t *journal = EXT3_SB(sb)->s_journal; + transaction_t *transaction; long ret; int block; @@ -2831,6 +2836,30 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) ei->i_data[block] = raw_inode->i_block[block]; INIT_LIST_HEAD(&ei->i_orphan); + /* + * Set transaction id's of transactions that have to be committed + * to finish f[data]sync. We set them to currently running transaction + * as we cannot be sure that the inode or some of its metadata isn't + * part of the transaction - the inode could have been reclaimed and + * now it is reread from disk. + */ + if (journal) { + tid_t tid; + + spin_lock(&journal->j_state_lock); + if (journal->j_running_transaction) + transaction = journal->j_running_transaction; + else + transaction = journal->j_committing_transaction; + if (transaction) + tid = transaction->t_tid; + else + tid = journal->j_commit_sequence; + spin_unlock(&journal->j_state_lock); + atomic_set(&ei->i_sync_tid, tid); + atomic_set(&ei->i_datasync_tid, tid); + } + if (inode->i_ino >= EXT3_FIRST_INO(inode->i_sb) + 1 && EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) { /* @@ -3015,6 +3044,7 @@ again: err = rc; ei->i_state &= ~EXT3_STATE_NEW; + atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid); out_brelse: brelse (bh); ext3_std_error(inode->i_sb, err); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 7a520a862f49..427496c4767c 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -466,6 +466,8 @@ static struct inode *ext3_alloc_inode(struct super_block *sb) return NULL; ei->i_block_alloc_info = NULL; ei->vfs_inode.i_version = 1; + atomic_set(&ei->i_datasync_tid, 0); + atomic_set(&ei->i_sync_tid, 0); return &ei->vfs_inode; } diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h index ca1bfe90004f..93e7428156ba 100644 --- a/include/linux/ext3_fs_i.h +++ b/include/linux/ext3_fs_i.h @@ -137,6 +137,14 @@ struct ext3_inode_info { * by other means, so we have truncate_mutex. */ struct mutex truncate_mutex; + + /* + * Transactions that contain inode's metadata needed to complete + * fsync and fdatasync, respectively. + */ + atomic_t i_sync_tid; + atomic_t i_datasync_tid; + struct inode vfs_inode; }; -- cgit v1.2.3-71-gd317 From f5c15d0b37ab1cd3969b8ce7828ab41c79f36f77 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 11 Nov 2009 14:26:22 -0800 Subject: fb: remove fb_save_state() and fb_restore_state operations Remove fb_save_state() and fb_restore_state operations from frame buffer layer. They are used only in two drivers: 1. savagefb - and cause bug #11248 2. uvesafb Usage of these operations is misunderstood in both drivers so kill these operations, fix the bug #11248 and avoid confusion in the future. Tested on Savage 3D/MV card and the patch fixes the bug #11248. The frame buffer layer uses these funtions during switch between graphics and text mode of the console, but these drivers saves state before switching of the frame buffer (in the fb_open) and after releasing it (in the fb_release). This defeats the purpose of these operations. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11248 Signed-off-by: Krzysztof Helt Reported-by: Jochen Hein Tested-by: Jochen Hein Cc: Geert Uytterhoeven Cc: Michal Januszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atafb.c | 6 ------ drivers/video/console/fbcon.c | 5 +---- drivers/video/savage/savagefb_driver.c | 18 ------------------ drivers/video/uvesafb.c | 28 ---------------------------- include/linux/fb.h | 6 ------ 5 files changed, 1 insertion(+), 62 deletions(-) (limited to 'include/linux') diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 8cd279be74e5..37624f74e88b 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -329,12 +329,6 @@ extern unsigned char fontdata_8x16[]; * * * perform fb specific mmap * * int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma); - * - * * save current hardware state * - * void (*fb_save_state)(struct fb_info *info); - * - * * restore saved state * - * void (*fb_restore_state)(struct fb_info *info); * } ; */ diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 5a686cea23f4..3681c6a88212 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2311,14 +2311,11 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) ops->graphics = 1; if (!blank) { - if (info->fbops->fb_save_state) - info->fbops->fb_save_state(info); var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE; fb_set_var(info, &var); ops->graphics = 0; ops->var = info->var; - } else if (info->fbops->fb_restore_state) - info->fbops->fb_restore_state(info); + } } if (!fbcon_is_inactive(vc, info)) { diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 37b135d5d12e..0857b3b8c495 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1606,22 +1606,6 @@ static int savagefb_blank(int blank, struct fb_info *info) return (blank == FB_BLANK_NORMAL) ? 1 : 0; } -static void savagefb_save_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savage_get_default_par(par, &par->save); -} - -static void savagefb_restore_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savagefb_blank(FB_BLANK_POWERDOWN, info); - savage_set_default_par(par, &par->save); - savagefb_blank(FB_BLANK_UNBLANK, info); -} - static int savagefb_open(struct fb_info *info, int user) { struct savagefb_par *par = info->par; @@ -1667,8 +1651,6 @@ static struct fb_ops savagefb_ops = { .fb_setcolreg = savagefb_setcolreg, .fb_pan_display = savagefb_pan_display, .fb_blank = savagefb_blank, - .fb_save_state = savagefb_save_state, - .fb_restore_state = savagefb_restore_state, #if defined(CONFIG_FB_SAVAGE_ACCEL) .fb_fillrect = savagefb_fillrect, .fb_copyarea = savagefb_copyarea, diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index e35232a18571..54fbb2995a5f 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -1411,23 +1411,6 @@ static int uvesafb_check_var(struct fb_var_screeninfo *var, return 0; } -static void uvesafb_save_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - if (par->vbe_state_saved) - kfree(par->vbe_state_saved); - - par->vbe_state_saved = uvesafb_vbe_state_save(par); -} - -static void uvesafb_restore_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - uvesafb_vbe_state_restore(par, par->vbe_state_saved); -} - static struct fb_ops uvesafb_ops = { .owner = THIS_MODULE, .fb_open = uvesafb_open, @@ -1441,8 +1424,6 @@ static struct fb_ops uvesafb_ops = { .fb_imageblit = cfb_imageblit, .fb_check_var = uvesafb_check_var, .fb_set_par = uvesafb_set_par, - .fb_save_state = uvesafb_save_state, - .fb_restore_state = uvesafb_restore_state, }; static void __devinit uvesafb_init_info(struct fb_info *info, @@ -1459,15 +1440,6 @@ static void __devinit uvesafb_init_info(struct fb_info *info, info->fix.ypanstep = par->ypan ? 1 : 0; info->fix.ywrapstep = (par->ypan > 1) ? 1 : 0; - /* - * If we were unable to get the state buffer size, disable - * functions for saving and restoring the hardware state. - */ - if (par->vbe_state_size == 0) { - info->fbops->fb_save_state = NULL; - info->fbops->fb_restore_state = NULL; - } - /* Disable blanking if the user requested so. */ if (!blank) info->fbops->fb_blank = NULL; diff --git a/include/linux/fb.h b/include/linux/fb.h index a34bdf5a9d23..de9c722e7b90 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -669,12 +669,6 @@ struct fb_ops { /* perform fb specific mmap */ int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma); - /* save current hardware state */ - void (*fb_save_state)(struct fb_info *info); - - /* restore saved state */ - void (*fb_restore_state)(struct fb_info *info); - /* get capability given var */ void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps, struct fb_var_screeninfo *var); -- cgit v1.2.3-71-gd317 From b87e5e2b8ed9336566100c8c796ab6dd52436881 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 11 Nov 2009 14:26:42 -0800 Subject: serial: add support for the Lava Quattro PCI quad-port 16550A card This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by: Lennert Buytenhek Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 6 ++++++ include/linux/pci_ids.h | 2 ++ 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index b2d65b208e55..b28af13c45a1 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -3139,6 +3139,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9ceb392cb984..84cf1f3b7838 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1956,6 +1956,8 @@ #define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ #define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ #define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_A 0x0120 /* 2x 16550A, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_B 0x0121 /* 2x 16550A, half of 4 port */ #define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */ #define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */ #define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */ -- cgit v1.2.3-71-gd317