boot.c (10364B)
1/* 2 * QEMU RISC-V Boot Helper 3 * 4 * Copyright (c) 2017 SiFive, Inc. 5 * Copyright (c) 2019 Alistair Francis <alistair.francis@wdc.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms and conditions of the GNU General Public License, 9 * version 2 or later, as published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope it will be useful, but WITHOUT 12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 14 * more details. 15 * 16 * You should have received a copy of the GNU General Public License along with 17 * this program. If not, see <http://www.gnu.org/licenses/>. 18 */ 19 20#include "qemu/osdep.h" 21#include "qemu-common.h" 22#include "qemu/datadir.h" 23#include "qemu/units.h" 24#include "qemu/error-report.h" 25#include "exec/cpu-defs.h" 26#include "hw/boards.h" 27#include "hw/loader.h" 28#include "hw/riscv/boot.h" 29#include "hw/riscv/boot_opensbi.h" 30#include "elf.h" 31#include "sysemu/device_tree.h" 32#include "sysemu/qtest.h" 33 34#include <libfdt.h> 35 36bool riscv_is_32bit(RISCVHartArrayState *harts) 37{ 38 return riscv_cpu_is_32bit(&harts->harts[0].env); 39} 40 41target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts, 42 target_ulong firmware_end_addr) { 43 if (riscv_is_32bit(harts)) { 44 return QEMU_ALIGN_UP(firmware_end_addr, 4 * MiB); 45 } else { 46 return QEMU_ALIGN_UP(firmware_end_addr, 2 * MiB); 47 } 48} 49 50target_ulong riscv_find_and_load_firmware(MachineState *machine, 51 const char *default_machine_firmware, 52 hwaddr firmware_load_addr, 53 symbol_fn_t sym_cb) 54{ 55 char *firmware_filename = NULL; 56 target_ulong firmware_end_addr = firmware_load_addr; 57 58 if ((!machine->firmware) || (!strcmp(machine->firmware, "default"))) { 59 /* 60 * The user didn't specify -bios, or has specified "-bios default". 61 * That means we are going to load the OpenSBI binary included in 62 * the QEMU source. 63 */ 64 firmware_filename = riscv_find_firmware(default_machine_firmware); 65 } else if (strcmp(machine->firmware, "none")) { 66 firmware_filename = riscv_find_firmware(machine->firmware); 67 } 68 69 if (firmware_filename) { 70 /* If not "none" load the firmware */ 71 firmware_end_addr = riscv_load_firmware(firmware_filename, 72 firmware_load_addr, sym_cb); 73 g_free(firmware_filename); 74 } 75 76 return firmware_end_addr; 77} 78 79char *riscv_find_firmware(const char *firmware_filename) 80{ 81 char *filename; 82 83 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware_filename); 84 if (filename == NULL) { 85 if (!qtest_enabled()) { 86 /* 87 * We only ship plain binary bios images in the QEMU source. 88 * With Spike machine that uses ELF images as the default bios, 89 * running QEMU test will complain hence let's suppress the error 90 * report for QEMU testing. 91 */ 92 error_report("Unable to load the RISC-V firmware \"%s\"", 93 firmware_filename); 94 exit(1); 95 } 96 } 97 98 return filename; 99} 100 101target_ulong riscv_load_firmware(const char *firmware_filename, 102 hwaddr firmware_load_addr, 103 symbol_fn_t sym_cb) 104{ 105 uint64_t firmware_entry, firmware_size, firmware_end; 106 107 if (load_elf_ram_sym(firmware_filename, NULL, NULL, NULL, 108 &firmware_entry, NULL, &firmware_end, NULL, 109 0, EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) { 110 return firmware_end; 111 } 112 113 firmware_size = load_image_targphys_as(firmware_filename, 114 firmware_load_addr, 115 current_machine->ram_size, NULL); 116 117 if (firmware_size > 0) { 118 return firmware_load_addr + firmware_size; 119 } 120 121 error_report("could not load firmware '%s'", firmware_filename); 122 exit(1); 123} 124 125target_ulong riscv_load_kernel(const char *kernel_filename, 126 target_ulong kernel_start_addr, 127 symbol_fn_t sym_cb) 128{ 129 uint64_t kernel_entry; 130 131 if (load_elf_ram_sym(kernel_filename, NULL, NULL, NULL, 132 &kernel_entry, NULL, NULL, NULL, 0, 133 EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) { 134 return kernel_entry; 135 } 136 137 if (load_uimage_as(kernel_filename, &kernel_entry, NULL, NULL, 138 NULL, NULL, NULL) > 0) { 139 return kernel_entry; 140 } 141 142 if (load_image_targphys_as(kernel_filename, kernel_start_addr, 143 current_machine->ram_size, NULL) > 0) { 144 return kernel_start_addr; 145 } 146 147 error_report("could not load kernel '%s'", kernel_filename); 148 exit(1); 149} 150 151hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size, 152 uint64_t kernel_entry, hwaddr *start) 153{ 154 int size; 155 156 /* 157 * We want to put the initrd far enough into RAM that when the 158 * kernel is uncompressed it will not clobber the initrd. However 159 * on boards without much RAM we must ensure that we still leave 160 * enough room for a decent sized initrd, and on boards with large 161 * amounts of RAM we must avoid the initrd being so far up in RAM 162 * that it is outside lowmem and inaccessible to the kernel. 163 * So for boards with less than 256MB of RAM we put the initrd 164 * halfway into RAM, and for boards with 256MB of RAM or more we put 165 * the initrd at 128MB. 166 */ 167 *start = kernel_entry + MIN(mem_size / 2, 128 * MiB); 168 169 size = load_ramdisk(filename, *start, mem_size - *start); 170 if (size == -1) { 171 size = load_image_targphys(filename, *start, mem_size - *start); 172 if (size == -1) { 173 error_report("could not load ramdisk '%s'", filename); 174 exit(1); 175 } 176 } 177 178 return *start + size; 179} 180 181uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt) 182{ 183 uint32_t temp, fdt_addr; 184 hwaddr dram_end = dram_base + mem_size; 185 int ret, fdtsize = fdt_totalsize(fdt); 186 187 if (fdtsize <= 0) { 188 error_report("invalid device-tree"); 189 exit(1); 190 } 191 192 /* 193 * We should put fdt as far as possible to avoid kernel/initrd overwriting 194 * its content. But it should be addressable by 32 bit system as well. 195 * Thus, put it at an 16MB aligned address that less than fdt size from the 196 * end of dram or 3GB whichever is lesser. 197 */ 198 temp = MIN(dram_end, 3072 * MiB); 199 fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 16 * MiB); 200 201 ret = fdt_pack(fdt); 202 /* Should only fail if we've built a corrupted tree */ 203 g_assert(ret == 0); 204 /* copy in the device tree */ 205 qemu_fdt_dumpdtb(fdt, fdtsize); 206 207 rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr, 208 &address_space_memory); 209 210 return fdt_addr; 211} 212 213void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base, 214 hwaddr rom_size, uint32_t reset_vec_size, 215 uint64_t kernel_entry) 216{ 217 struct fw_dynamic_info dinfo; 218 size_t dinfo_len; 219 220 if (sizeof(dinfo.magic) == 4) { 221 dinfo.magic = cpu_to_le32(FW_DYNAMIC_INFO_MAGIC_VALUE); 222 dinfo.version = cpu_to_le32(FW_DYNAMIC_INFO_VERSION); 223 dinfo.next_mode = cpu_to_le32(FW_DYNAMIC_INFO_NEXT_MODE_S); 224 dinfo.next_addr = cpu_to_le32(kernel_entry); 225 } else { 226 dinfo.magic = cpu_to_le64(FW_DYNAMIC_INFO_MAGIC_VALUE); 227 dinfo.version = cpu_to_le64(FW_DYNAMIC_INFO_VERSION); 228 dinfo.next_mode = cpu_to_le64(FW_DYNAMIC_INFO_NEXT_MODE_S); 229 dinfo.next_addr = cpu_to_le64(kernel_entry); 230 } 231 dinfo.options = 0; 232 dinfo.boot_hart = 0; 233 dinfo_len = sizeof(dinfo); 234 235 /** 236 * copy the dynamic firmware info. This information is specific to 237 * OpenSBI but doesn't break any other firmware as long as they don't 238 * expect any certain value in "a2" register. 239 */ 240 if (dinfo_len > (rom_size - reset_vec_size)) { 241 error_report("not enough space to store dynamic firmware info"); 242 exit(1); 243 } 244 245 rom_add_blob_fixed_as("mrom.finfo", &dinfo, dinfo_len, 246 rom_base + reset_vec_size, 247 &address_space_memory); 248} 249 250void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts, 251 hwaddr start_addr, 252 hwaddr rom_base, hwaddr rom_size, 253 uint64_t kernel_entry, 254 uint32_t fdt_load_addr, void *fdt) 255{ 256 int i; 257 uint32_t start_addr_hi32 = 0x00000000; 258 259 if (!riscv_is_32bit(harts)) { 260 start_addr_hi32 = start_addr >> 32; 261 } 262 /* reset vector */ 263 uint32_t reset_vec[10] = { 264 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ 265 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */ 266 0xf1402573, /* csrr a0, mhartid */ 267 0, 268 0, 269 0x00028067, /* jr t0 */ 270 start_addr, /* start: .dword */ 271 start_addr_hi32, 272 fdt_load_addr, /* fdt_laddr: .dword */ 273 0x00000000, 274 /* fw_dyn: */ 275 }; 276 if (riscv_is_32bit(harts)) { 277 reset_vec[3] = 0x0202a583; /* lw a1, 32(t0) */ 278 reset_vec[4] = 0x0182a283; /* lw t0, 24(t0) */ 279 } else { 280 reset_vec[3] = 0x0202b583; /* ld a1, 32(t0) */ 281 reset_vec[4] = 0x0182b283; /* ld t0, 24(t0) */ 282 } 283 284 /* copy in the reset vector in little_endian byte order */ 285 for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { 286 reset_vec[i] = cpu_to_le32(reset_vec[i]); 287 } 288 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), 289 rom_base, &address_space_memory); 290 riscv_rom_copy_firmware_info(machine, rom_base, rom_size, sizeof(reset_vec), 291 kernel_entry); 292 293 return; 294}