imx_serial.h (3964B)
1/* 2 * Device model for i.MX UART 3 * 4 * Copyright (c) 2008 OKL 5 * Originally Written by Hans Jiang 6 * Copyright (c) 2011 NICTA Pty Ltd. 7 * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 12 * 2 of the License, or (at your option) any later version. 13 * 14 * You should have received a copy of the GNU General Public License along 15 * with this program; if not, see <http://www.gnu.org/licenses/>. 16 */ 17 18#ifndef IMX_SERIAL_H 19#define IMX_SERIAL_H 20 21#include "hw/sysbus.h" 22#include "chardev/char-fe.h" 23#include "qom/object.h" 24 25#define TYPE_IMX_SERIAL "imx.serial" 26OBJECT_DECLARE_SIMPLE_TYPE(IMXSerialState, IMX_SERIAL) 27 28#define URXD_CHARRDY (1<<15) /* character read is valid */ 29#define URXD_ERR (1<<14) /* Character has error */ 30#define URXD_FRMERR (1<<12) /* Character has frame error */ 31#define URXD_BRK (1<<11) /* Break received */ 32 33#define USR1_PARTYER (1<<15) /* Parity Error */ 34#define USR1_RTSS (1<<14) /* RTS pin status */ 35#define USR1_TRDY (1<<13) /* Tx ready */ 36#define USR1_RTSD (1<<12) /* RTS delta: pin changed state */ 37#define USR1_ESCF (1<<11) /* Escape sequence interrupt */ 38#define USR1_FRAMERR (1<<10) /* Framing error */ 39#define USR1_RRDY (1<<9) /* receiver ready */ 40#define USR1_AGTIM (1<<8) /* Aging timer interrupt */ 41#define USR1_DTRD (1<<7) /* DTR changed */ 42#define USR1_RXDS (1<<6) /* Receiver is idle */ 43#define USR1_AIRINT (1<<5) /* Aysnch IR interrupt */ 44#define USR1_AWAKE (1<<4) /* Falling edge detected on RXd pin */ 45 46#define USR2_ADET (1<<15) /* Autobaud complete */ 47#define USR2_TXFE (1<<14) /* Transmit FIFO empty */ 48#define USR2_DTRF (1<<13) /* DTR/DSR transition */ 49#define USR2_IDLE (1<<12) /* UART has been idle for too long */ 50#define USR2_ACST (1<<11) /* Autobaud counter stopped */ 51#define USR2_RIDELT (1<<10) /* Ring Indicator delta */ 52#define USR2_RIIN (1<<9) /* Ring Indicator Input */ 53#define USR2_IRINT (1<<8) /* Serial Infrared Interrupt */ 54#define USR2_WAKE (1<<7) /* Start bit detected */ 55#define USR2_DCDDELT (1<<6) /* Data Carrier Detect delta */ 56#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */ 57#define USR2_RTSF (1<<4) /* RTS transition */ 58#define USR2_TXDC (1<<3) /* Transmission complete */ 59#define USR2_BRCD (1<<2) /* Break condition detected */ 60#define USR2_ORE (1<<1) /* Overrun error */ 61#define USR2_RDR (1<<0) /* Receive data ready */ 62 63#define UCR1_TRDYEN (1<<13) /* Tx Ready Interrupt Enable */ 64#define UCR1_RRDYEN (1<<9) /* Rx Ready Interrupt Enable */ 65#define UCR1_TXMPTYEN (1<<6) /* Tx Empty Interrupt Enable */ 66#define UCR1_UARTEN (1<<0) /* UART Enable */ 67 68#define UCR2_TXEN (1<<2) /* Transmitter enable */ 69#define UCR2_RXEN (1<<1) /* Receiver enable */ 70#define UCR2_SRST (1<<0) /* Reset complete */ 71 72#define UCR4_DREN BIT(0) /* Receive Data Ready interrupt enable */ 73#define UCR4_TCEN BIT(3) /* TX complete interrupt enable */ 74 75#define UTS1_TXEMPTY (1<<6) 76#define UTS1_RXEMPTY (1<<5) 77#define UTS1_TXFULL (1<<4) 78#define UTS1_RXFULL (1<<3) 79 80struct IMXSerialState { 81 /*< private >*/ 82 SysBusDevice parent_obj; 83 84 /*< public >*/ 85 MemoryRegion iomem; 86 int32_t readbuff; 87 88 uint32_t usr1; 89 uint32_t usr2; 90 uint32_t ucr1; 91 uint32_t ucr2; 92 uint32_t uts1; 93 94 /* 95 * The registers below are implemented just so that the 96 * guest OS sees what it has written 97 */ 98 uint32_t onems; 99 uint32_t ufcr; 100 uint32_t ubmr; 101 uint32_t ubrc; 102 uint32_t ucr3; 103 uint32_t ucr4; 104 105 qemu_irq irq; 106 CharBackend chr; 107}; 108 109#endif