Merge branch 'objtool/urgent'

Fixup conflicts.

# Conflicts:
#	tools/objtool/check.c

1 files changed, 20 insertions, 1 deletions

diff --git a/drivers/media/rc/ir_toy.c b/drivers/media/rc/ir_toy.c
index 3e729a17b35f..48d52baec1a1 100644
--- a/drivers/media/rc/ir_toy.c
+++ b/drivers/media/rc/ir_toy.c
@@ -24,6 +24,7 @@ static const u8 COMMAND_VERSION[] = { 'v' };
 // End transmit and repeat reset command so we exit sump mode
 static const u8 COMMAND_RESET[] = { 0xff, 0xff, 0, 0, 0, 0, 0 };
 static const u8 COMMAND_SMODE_ENTER[] = { 's' };
+static const u8 COMMAND_SMODE_EXIT[] = { 0 };
 static const u8 COMMAND_TXSTART[] = { 0x26, 0x24, 0x25, 0x03 };
 
 #define REPLY_XMITCOUNT 't'
@@ -309,12 +310,30 @@ static int irtoy_tx(struct rc_dev *rc, uint *txbuf, uint count)
 		buf[i] = cpu_to_be16(v);
 	}
 
-	buf[count] = cpu_to_be16(0xffff);
+	buf[count] = 0xffff;
 
 	irtoy->tx_buf = buf;
 	irtoy->tx_len = size;
 	irtoy->emitted = 0;
 
+	// There is an issue where if the unit is receiving IR while the
+	// first TXSTART command is sent, the device might end up hanging
+	// with its led on. It does not respond to any command when this
+	// happens. To work around this, re-enter sample mode.
+	err = irtoy_command(irtoy, COMMAND_SMODE_EXIT,
+			    sizeof(COMMAND_SMODE_EXIT), STATE_RESET);
+	if (err) {
+		dev_err(irtoy->dev, "exit sample mode: %d\n", err);
+		return err;
+	}
+
+	err = irtoy_command(irtoy, COMMAND_SMODE_ENTER,
+			    sizeof(COMMAND_SMODE_ENTER), STATE_COMMAND);
+	if (err) {
+		dev_err(irtoy->dev, "enter sample mode: %d\n", err);
+		return err;
+	}
+
 	err = irtoy_command(irtoy, COMMAND_TXSTART, sizeof(COMMAND_TXSTART),
 			    STATE_TX);
 	kfree(buf);