Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Pin control bulk changes for the v4.11 kernel cycle.

  Core changes:

   - Switch the generic pin config argument from 16 to 24 bits, only use
     8 bits for the configuration type. We might need to encode more
     information about a certain setting than we need to encode
     different generic settings.

   - Add a cross-talk API to the pin control GPIO back-end, utilizing
     pinctrl_gpio_set_config() from GPIO drivers that want to set up a
     certain pin configuration in the back-end.

     This also includes the .set_config() refactoring of the GPIO chips,
     so that they pass a generic configuration for things like
     debouncing and single ended (typically open drain). This change has
     also been merged in an immutable branch to the GPIO tree.

   - Take hogs with a delayed work, so that we finalize probing a pin
     controller before trying to get any hogs.

   - For pin controllers putting all group and function definitions into
     the device tree, we now have generic code to deal with this and it
     is used in two drivers so far.

   - Simplifications of the pin request conflict check.

   - Make dt_free_map() optional.

  Updates to drivers:

   - pinctrl-single now use the generic helpers to generate dynamic
     group and function tables from the device tree.

   - Texas Instruments IOdelay configuration driver add-on to
     pinctrl-single.

   - i.MX: use radix trees to store groups and functions, use the new
     generic group and function helpers to manage them.

   - Intel: add support for hardware debouncing and 1K pull-down. New
     subdriver for the Gemini Lake SoC.

   - Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
     MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.

   - Aspeed: use syscon cross-dependencies to set up related bits in the
     LPC host controller and display controller.

   - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs.
     Add banks Y, Z, AA, AB and AC.

   - AMD: support additional GPIO.

   - STM32: set this controller to strict muxing mode. STM32H743 MCU
     support.

   - Allwinner sunxi: deep simplifications on how to support subvariants
     of SoCs without adding to much SoC-specific data for each
     subvariant, especially for sun5i variants. New driver for V3s SoCs.
     New driver for the H5 SoC. Support A31/A31s variants with the new
     variant framework.

   - Mvebu: simplifications to use a MMIO and regmap abstraction. New
     subdrivers for the 98DX3236, 98DX5241 SoCs.

   - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC
     driver to access regmaps. Add infrastructure for pin-bank retention
     control. Clean out the pin retention control from
     arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in
     the Samsung pin control driver(s).

   - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.

   - Qualcomm: use raw spinlock variants: this makes the qualcomm driver
     realtime-safe"

* tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits)
  pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()
  pinctrl: intel: unlock on error in intel_config_set_pull()
  pinctrl: berlin: make bool drivers explicitly non-modular
  pinctrl: spear: make bool drivers explicitly non-modular
  pinctrl: mvebu: make bool drivers explicitly non-modular
  pinctrl: sunxi: make sun5i explicitly non-modular
  pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function
  pinctrl: samsung: mark PM functions as __maybe_unused
  pinctrl: sunxi: Remove redundant A31s pinctrl driver
  pinctrl: sunxi: Support A31/A31s with pinctrl variants
  pinctrl: Amend bindings for STM32 pinctrl
  pinctrl: Add STM32 pinctrl driver DT bindings
  pinctrl: stm32: Add STM32H743 MCU support
  include: dt-bindings: Add STM32H7 pinctrl DT defines
  gpio: aspeed: Remove dependence on GPIOF_* macros
  pinctrl: stm32: fix bad location of gpiochip_lock_as_irq
  drivers: pinctrl: add driver for Allwinner H5 SoC
  pinctrl: intel: Add Intel Gemini Lake pin controller support
  pinctrl: intel: Add support for 1k additional pull-down
  pinctrl: intel: Add support for hardware debouncer
  ...

5 files changed, 65 insertions, 55 deletions

diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index e973faba69dc..846f3b989480 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -8,6 +8,7 @@
 #include <linux/irqdomain.h>
 #include <linux/lockdep.h>
 #include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
 
 struct gpio_desc;
 struct of_phandle_args;
@@ -19,18 +20,6 @@ struct module;
 #ifdef CONFIG_GPIOLIB
 
 /**
- * enum single_ended_mode - mode for single ended operation
- * @LINE_MODE_PUSH_PULL: normal mode for a GPIO line, drive actively high/low
- * @LINE_MODE_OPEN_DRAIN: set line to be open drain
- * @LINE_MODE_OPEN_SOURCE: set line to be open source
- */
-enum single_ended_mode {
-	LINE_MODE_PUSH_PULL,
-	LINE_MODE_OPEN_DRAIN,
-	LINE_MODE_OPEN_SOURCE,
-};
-
-/**
  * struct gpio_chip - abstract a GPIO controller
  * @label: a functional name for the GPIO device, such as a part
  *	number or the name of the SoC IP-block implementing it.
@@ -48,16 +37,8 @@ enum single_ended_mode {
  * @get: returns value for signal "offset", 0=low, 1=high, or negative error
  * @set: assigns output value for signal "offset"
  * @set_multiple: assigns output values for multiple signals defined by "mask"
- * @set_debounce: optional hook for setting debounce time for specified gpio in
- *	interrupt triggered gpio chips
- * @set_single_ended: optional hook for setting a line as open drain, open
- *	source, or non-single ended (restore from open drain/source to normal
- *	push-pull mode) this should be implemented if the hardware supports
- *	open drain or open source settings. The GPIOlib will otherwise try
- *	to emulate open drain/source by not actively driving lines high/low
- *	if a consumer request this. The driver may return -ENOTSUPP if e.g.
- *	it supports just open drain but not open source and is called
- *	with LINE_MODE_OPEN_SOURCE as mode argument.
+ * @set_config: optional hook for all kinds of settings. Uses the same
+ *	packed config format as generic pinconf.
  * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
  *	implementation may not sleep
  * @dbg_show: optional routine to show contents in debugfs; default code
@@ -150,13 +131,9 @@ struct gpio_chip {
 	void			(*set_multiple)(struct gpio_chip *chip,
 						unsigned long *mask,
 						unsigned long *bits);
-	int			(*set_debounce)(struct gpio_chip *chip,
-						unsigned offset,
-						unsigned debounce);
-	int			(*set_single_ended)(struct gpio_chip *chip,
-						unsigned offset,
-						enum single_ended_mode mode);
-
+	int			(*set_config)(struct gpio_chip *chip,
+					      unsigned offset,
+					      unsigned long config);
 	int			(*to_irq)(struct gpio_chip *chip,
 						unsigned offset);
 
@@ -340,6 +317,8 @@ static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip,
 
 int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset);
 void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset);
+int gpiochip_generic_config(struct gpio_chip *chip, unsigned offset,
+			    unsigned long config);
 
 #ifdef CONFIG_PINCTRL
 
diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
index d7e5d608faa7..a0f2aba72fa9 100644
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@@ -29,6 +29,7 @@ extern int pinctrl_request_gpio(unsigned gpio);
 extern void pinctrl_free_gpio(unsigned gpio);
 extern int pinctrl_gpio_direction_input(unsigned gpio);
 extern int pinctrl_gpio_direction_output(unsigned gpio);
+extern int pinctrl_gpio_set_config(unsigned gpio, unsigned long config);
 
 extern struct pinctrl * __must_check pinctrl_get(struct device *dev);
 extern void pinctrl_put(struct pinctrl *p);
@@ -80,6 +81,11 @@ static inline int pinctrl_gpio_direction_output(unsigned gpio)
 	return 0;
 }
 
+static inline int pinctrl_gpio_set_config(unsigned gpio, unsigned long config)
+{
+	return 0;
+}
+
 static inline struct pinctrl * __must_check pinctrl_get(struct device *dev)
 {
 	return NULL;
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 12343caa114e..7620eb127cff 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -12,12 +12,6 @@
 #ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H
 #define __LINUX_PINCTRL_PINCONF_GENERIC_H
 
-/*
- * You shouldn't even be able to compile with these enums etc unless you're
- * using generic pin config. That is why this is defined out.
- */
-#ifdef CONFIG_GENERIC_PINCONF
-
 /**
  * enum pin_config_param - possible pin configuration parameters
  * @PIN_CONFIG_BIAS_BUS_HOLD: the pin will be set to weakly latch so that it
@@ -92,6 +86,8 @@
  * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
  *	you need to pass in custom configurations to the pin controller, use
  *	PIN_CONFIG_END+1 as the base offset.
+ * @PIN_CONFIG_MAX: this is the maximum configuration value that can be
+ *	presented using the packed format.
  */
 enum pin_config_param {
 	PIN_CONFIG_BIAS_BUS_HOLD,
@@ -112,49 +108,53 @@ enum pin_config_param {
 	PIN_CONFIG_OUTPUT,
 	PIN_CONFIG_POWER_SOURCE,
 	PIN_CONFIG_SLEW_RATE,
-	PIN_CONFIG_END = 0x7FFF,
-};
-
-#ifdef CONFIG_DEBUG_FS
-#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
-				.has_arg = d }
-
-struct pin_config_item {
-	const enum pin_config_param param;
-	const char * const display;
-	const char * const format;
-	bool has_arg;
+	PIN_CONFIG_END = 0x7F,
+	PIN_CONFIG_MAX = 0xFF,
 };
-#endif /* CONFIG_DEBUG_FS */
 
 /*
  * Helpful configuration macro to be used in tables etc.
  */
-#define PIN_CONF_PACKED(p, a) ((a << 16) | ((unsigned long) p & 0xffffUL))
+#define PIN_CONF_PACKED(p, a) ((a << 8) | ((unsigned long) p & 0xffUL))
 
 /*
  * The following inlines stuffs a configuration parameter and data value
  * into and out of an unsigned long argument, as used by the generic pin config
- * system. We put the parameter in the lower 16 bits and the argument in the
- * upper 16 bits.
+ * system. We put the parameter in the lower 8 bits and the argument in the
+ * upper 24 bits.
  */
 
 static inline enum pin_config_param pinconf_to_config_param(unsigned long config)
 {
-	return (enum pin_config_param) (config & 0xffffUL);
+	return (enum pin_config_param) (config & 0xffUL);
 }
 
-static inline u16 pinconf_to_config_argument(unsigned long config)
+static inline u32 pinconf_to_config_argument(unsigned long config)
 {
-	return (enum pin_config_param) ((config >> 16) & 0xffffUL);
+	return (u32) ((config >> 8) & 0xffffffUL);
 }
 
 static inline unsigned long pinconf_to_config_packed(enum pin_config_param param,
-						     u16 argument)
+						     u32 argument)
 {
 	return PIN_CONF_PACKED(param, argument);
 }
 
+#ifdef CONFIG_GENERIC_PINCONF
+
+#ifdef CONFIG_DEBUG_FS
+#define PCONFDUMP(a, b, c, d) {					\
+	.param = a, .display = b, .format = c, .has_arg = d	\
+	}
+
+struct pin_config_item {
+	const enum pin_config_param param;
+	const char * const display;
+	const char * const format;
+	bool has_arg;
+};
+#endif /* CONFIG_DEBUG_FS */
+
 #ifdef CONFIG_OF
 
 #include <linux/device.h>
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index a42e57da270d..8ce2d87a238b 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -141,12 +141,27 @@ struct pinctrl_desc {
 };
 
 /* External interface to pin controller */
+
+extern int pinctrl_register_and_init(struct pinctrl_desc *pctldesc,
+				     struct device *dev, void *driver_data,
+				     struct pinctrl_dev **pctldev);
+
+/* Please use pinctrl_register_and_init() instead */
 extern struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 				struct device *dev, void *driver_data);
+
 extern void pinctrl_unregister(struct pinctrl_dev *pctldev);
+
+extern int devm_pinctrl_register_and_init(struct device *dev,
+				struct pinctrl_desc *pctldesc,
+				void *driver_data,
+				struct pinctrl_dev **pctldev);
+
+/* Please use devm_pinctrl_register_and_init() instead */
 extern struct pinctrl_dev *devm_pinctrl_register(struct device *dev,
 				struct pinctrl_desc *pctldesc,
 				void *driver_data);
+
 extern void devm_pinctrl_unregister(struct device *dev,
 				struct pinctrl_dev *pctldev);
 
diff --git a/include/linux/soc/samsung/exynos-pmu.h b/include/linux/soc/samsung/exynos-pmu.h
index e2e9de1acc5b..e57eb4b6cc5a 100644
--- a/include/linux/soc/samsung/exynos-pmu.h
+++ b/include/linux/soc/samsung/exynos-pmu.h
@@ -12,6 +12,8 @@
 #ifndef __LINUX_SOC_EXYNOS_PMU_H
 #define __LINUX_SOC_EXYNOS_PMU_H
 
+struct regmap;
+
 enum sys_powerdown {
 	SYS_AFTR,
 	SYS_LPA,
@@ -20,5 +22,13 @@ enum sys_powerdown {
 };
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+#ifdef CONFIG_EXYNOS_PMU
+extern struct regmap *exynos_get_pmu_regmap(void);
+#else
+static inline struct regmap *exynos_get_pmu_regmap(void)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
 
 #endif /* __LINUX_SOC_EXYNOS_PMU_H */