Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
This pull request is intended for the 3.8 stream.  It is a bit large
-- I guess Thanksgiving got me off track!  At least the code got to
spend some time in linux-next... :-)

This includes the usual batch of pulls for Bluetooth, NFC, and mac80211
as well as iwlwifi.  Also here is an ath6kl pull, and a new driver
in the rtlwifi family.  The brcmfmac, brcmsmac, ath9k, and mwl8k get
their usual levels of attention, and a handful of other updates tag
along as well.

For more detail on the pulls, please see below...

On Bluetooth, Gustavo says:

"Another set of patches for integration in wireless-next. There are two big set
of changes in it: Andrei Emeltchenko and Mat Martineau added more patches
towards a full Bluetooth High Speed support and Johan Hedberg improve the
single mode support for Bluetooth dongles. Apart from that we have small fixes
and improvements."

...and:

"A few patches to 3.8. The majority of the work here is from Andrei on the High
Speed support. Other than that Johan added support for setting LE advertising
data. The rest are fixes and clean ups and small improvements like support for
a new broadcom hardware."

On mac80211, Johannes says:

"This is for mac80211, for -next (3.8). Plenty of changes, as you can see
below. Some fixes for previous changes like the export.h include, the
beacon listener fix from Ben Greear, etc. Overall, no exciting new
features, though hwsim does gain channel context support for people to
try it out and look at."

...and...:

"This one contains the mac80211-next material. Apart from a few small new
features and cleanups I have two fixes for the channel context code. The
RX_END timestamp support will probably be reworked again as Simon Barber
noted the calculations weren't really valid, but the discussions there
are still going on and it's better than what we had before."

...and:

"Please pull (see below) to get the following changes:
 * a fix & a debug aid in IBSS from Antonio,
 * mesh cleanups from Marco,
 * a few bugfixes for some of my previous patches from Arend and myself,
 * and the big initial VHT support patchset"

And on iwlwifi, Johannes says:

"In addition to the previous four patches that I'm not resending,
we have a number of cleanups, message reduction, firmware error
handling improvements (yes yes... we need to fix them instead)
and various other small things all over."

...and:

"In his quest to try to understand the current iwlwifi problems (like
stuck queues etc.) Emmanuel has first cleaned up the PCIe code, I'm
including his changes in this pull request. Other than that I only have
a small cleanup from Sachin Kamat to remove a duplicate include and a
bugfix to turn off MFP if software crypto is enabled, but this isn't
really interesting as MFP isn't supported right now anyway."

On NFC, Samuel says:

"With this one we have:

- A few HCI improvements in preparation for an upcoming HCI chipset support.
- A pn544 code cleanup after the old driver was removed.
- An LLCP improvement for notifying user space when one peer stops ACKing I
  frames."

On ath6kl, Kalle says:

"Major changes this time are firmware recover support to gracefully
handle if firmware crashes, support for changing regulatory domain and
support for new ar6004 hardware revision 1.4. Otherwise there are just
smaller fixes or cleanups from different people."

Thats about it... :-)  Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 122 insertions, 105 deletions

diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index fd15d9829705..93b1e091b1e9 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -157,6 +157,7 @@ struct bcma_host_ops {
 
 /* Chip IDs of SoCs */
 #define BCMA_CHIP_ID_BCM4706	0x5300
+#define  BCMA_PKG_ID_BCM4706L	1
 #define BCMA_CHIP_ID_BCM4716	0x4716
 #define  BCMA_PKG_ID_BCM4716	8
 #define  BCMA_PKG_ID_BCM4717	9
@@ -166,7 +167,11 @@ struct bcma_host_ops {
 #define BCMA_CHIP_ID_BCM4749	0x4749
 #define BCMA_CHIP_ID_BCM5356	0x5356
 #define BCMA_CHIP_ID_BCM5357	0x5357
+#define  BCMA_PKG_ID_BCM5358	9
+#define  BCMA_PKG_ID_BCM47186	10
+#define  BCMA_PKG_ID_BCM5357	11
 #define BCMA_CHIP_ID_BCM53572	53572
+#define  BCMA_PKG_ID_BCM47188	9
 
 struct bcma_device {
 	struct bcma_bus *bus;
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 85764a900731..f9c5a787d350 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -131,6 +131,8 @@
 
 #define IEEE80211_MAX_MESH_ID_LEN	32
 
+#define IEEE80211_NUM_TIDS		16
+
 #define IEEE80211_QOS_CTL_LEN		2
 /* 1d tag mask */
 #define IEEE80211_QOS_CTL_TAG1D_MASK		0x0007
@@ -666,6 +668,21 @@ struct ieee80211_meshconf_ie {
 } __attribute__ ((packed));
 
 /**
+ * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags
+ *
+ * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish
+ *	additional mesh peerings with other mesh STAs
+ * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs
+ * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure
+ *	is ongoing
+ */
+enum mesh_config_capab_flags {
+	IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS		= 0x01,
+	IEEE80211_MESHCONF_CAPAB_FORWARDING		= 0x08,
+	IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING		= 0x20,
+};
+
+/**
  * struct ieee80211_rann_ie
  *
  * This structure refers to "Root Announcement information element"
@@ -905,6 +922,38 @@ struct ieee80211_tdls_data {
 	} u;
 } __packed;
 
+/*
+ * Peer-to-Peer IE attribute related definitions.
+ */
+/**
+ * enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute.
+ */
+enum ieee80211_p2p_attr_id {
+	IEEE80211_P2P_ATTR_STATUS = 0,
+	IEEE80211_P2P_ATTR_MINOR_REASON,
+	IEEE80211_P2P_ATTR_CAPABILITY,
+	IEEE80211_P2P_ATTR_DEVICE_ID,
+	IEEE80211_P2P_ATTR_GO_INTENT,
+	IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT,
+	IEEE80211_P2P_ATTR_LISTEN_CHANNEL,
+	IEEE80211_P2P_ATTR_GROUP_BSSID,
+	IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING,
+	IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR,
+	IEEE80211_P2P_ATTR_MANAGABILITY,
+	IEEE80211_P2P_ATTR_CHANNEL_LIST,
+	IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
+	IEEE80211_P2P_ATTR_DEVICE_INFO,
+	IEEE80211_P2P_ATTR_GROUP_INFO,
+	IEEE80211_P2P_ATTR_GROUP_ID,
+	IEEE80211_P2P_ATTR_INTERFACE,
+	IEEE80211_P2P_ATTR_OPER_CHANNEL,
+	IEEE80211_P2P_ATTR_INVITE_FLAGS,
+	/* 19 - 220: Reserved */
+	IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221,
+
+	IEEE80211_P2P_ATTR_MAX
+};
+
 /**
  * struct ieee80211_bar - HT Block Ack Request
  *
@@ -1114,11 +1163,13 @@ struct ieee80211_ht_operation {
  *	STA can receive. Rate expressed in units of 1 Mbps.
  *	If this field is 0 this value should not be used to
  *	consider the highest RX data rate supported.
+ *	The top 3 bits of this field are reserved.
  * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
  * @tx_highest: Indicates highest long GI VHT PPDU data rate
  *	STA can transmit. Rate expressed in units of 1 Mbps.
  *	If this field is 0 this value should not be used to
  *	consider the highest TX data rate supported.
+ *	The top 3 bits of this field are reserved.
  */
 struct ieee80211_vht_mcs_info {
 	__le16 rx_mcs_map;
@@ -1128,6 +1179,27 @@ struct ieee80211_vht_mcs_info {
 } __packed;
 
 /**
+ * enum ieee80211_vht_mcs_support - VHT MCS support definitions
+ * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the
+ *	number of streams
+ * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported
+ * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported
+ * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported
+ *
+ * These definitions are used in each 2-bit subfield of the @rx_mcs_map
+ * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are
+ * both split into 8 subfields by number of streams. These values indicate
+ * which MCSes are supported for the number of streams the value appears
+ * for.
+ */
+enum ieee80211_vht_mcs_support {
+	IEEE80211_VHT_MCS_SUPPORT_0_7	= 0,
+	IEEE80211_VHT_MCS_SUPPORT_0_8	= 1,
+	IEEE80211_VHT_MCS_SUPPORT_0_9	= 2,
+	IEEE80211_VHT_MCS_NOT_SUPPORTED	= 3,
+};
+
+/**
  * struct ieee80211_vht_cap - VHT capabilities
  *
  * This structure is the "VHT capabilities element" as
diff --git a/include/linux/nfc/pn544.h b/include/linux/nfc/pn544.h
deleted file mode 100644
index 9890bbaf4328..000000000000
--- a/include/linux/nfc/pn544.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Driver include for the PN544 NFC chip.
- *
- * Copyright (C) Nokia Corporation
- *
- * Author: Jari Vanhala <ext-jari.vanhala@nokia.com>
- * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _PN544_H_
-#define _PN544_H_
-
-#include <linux/i2c.h>
-
-#define PN544_DRIVER_NAME	"pn544"
-#define PN544_MAXWINDOW_SIZE	7
-#define PN544_WINDOW_SIZE	4
-#define PN544_RETRIES		10
-#define PN544_MAX_I2C_TRANSFER	0x0400
-#define PN544_MSG_MAX_SIZE	0x21 /* at normal HCI mode */
-
-/* ioctl */
-#define PN544_CHAR_BASE		'P'
-#define PN544_IOR(num, dtype)	_IOR(PN544_CHAR_BASE, num, dtype)
-#define PN544_IOW(num, dtype)	_IOW(PN544_CHAR_BASE, num, dtype)
-#define PN544_GET_FW_MODE	PN544_IOW(1, unsigned int)
-#define PN544_SET_FW_MODE	PN544_IOW(2, unsigned int)
-#define PN544_GET_DEBUG		PN544_IOW(3, unsigned int)
-#define PN544_SET_DEBUG		PN544_IOW(4, unsigned int)
-
-/* Timing restrictions (ms) */
-#define PN544_RESETVEN_TIME	30 /* 7 */
-#define PN544_PVDDVEN_TIME	0
-#define PN544_VBATVEN_TIME	0
-#define PN544_GPIO4VEN_TIME	0
-#define PN544_WAKEUP_ACK	5
-#define PN544_WAKEUP_GUARD	(PN544_WAKEUP_ACK + 1)
-#define PN544_INACTIVITY_TIME	1000
-#define PN544_INTERFRAME_DELAY	200 /* us */
-#define PN544_BAUDRATE_CHANGE	150 /* us */
-
-/* Debug bits */
-#define PN544_DEBUG_BUF		0x01
-#define PN544_DEBUG_READ	0x02
-#define PN544_DEBUG_WRITE	0x04
-#define PN544_DEBUG_IRQ		0x08
-#define PN544_DEBUG_CALLS	0x10
-#define PN544_DEBUG_MODE	0x20
-
-/* Normal (HCI) mode */
-#define PN544_LLC_HCI_OVERHEAD	3 /* header + crc (to length) */
-#define PN544_LLC_MIN_SIZE	(1 + PN544_LLC_HCI_OVERHEAD) /* length + */
-#define PN544_LLC_MAX_DATA	(PN544_MSG_MAX_SIZE - 2)
-#define PN544_LLC_MAX_HCI_SIZE	(PN544_LLC_MAX_DATA - 2)
-
-struct pn544_llc_packet {
-	unsigned char length; /* of rest of packet */
-	unsigned char header;
-	unsigned char data[PN544_LLC_MAX_DATA]; /* includes crc-ccitt */
-};
-
-/* Firmware upgrade mode */
-#define PN544_FW_HEADER_SIZE	3
-/* max fw transfer is 1024bytes, but I2C limits it to 0xC0 */
-#define PN544_MAX_FW_DATA	(PN544_MAX_I2C_TRANSFER - PN544_FW_HEADER_SIZE)
-
-struct pn544_fw_packet {
-	unsigned char command; /* status in answer */
-	unsigned char length[2]; /* big-endian order (msf) */
-	unsigned char data[PN544_MAX_FW_DATA];
-};
-
-#ifdef __KERNEL__
-enum {
-	NFC_GPIO_ENABLE,
-	NFC_GPIO_FW_RESET,
-	NFC_GPIO_IRQ
-};
-
-/* board config */
-struct pn544_nfc_platform_data {
-	int (*request_resources) (struct i2c_client *client);
-	void (*free_resources) (void);
-	void (*enable) (int fw);
-	int (*test) (void);
-	void (*disable) (void);
-	int (*get_gpio)(int type);
-};
-#endif /* __KERNEL__ */
-
-#endif /* _PN544_H_ */
diff --git a/include/linux/platform_data/pn544.h b/include/linux/platform_data/pn544.h
new file mode 100644
index 000000000000..713bfd703342
--- /dev/null
+++ b/include/linux/platform_data/pn544.h
@@ -0,0 +1,44 @@
+/*
+ * Driver include for the PN544 NFC chip.
+ *
+ * Copyright (C) Nokia Corporation
+ *
+ * Author: Jari Vanhala <ext-jari.vanhala@nokia.com>
+ * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _PN544_H_
+#define _PN544_H_
+
+#include <linux/i2c.h>
+
+enum {
+	NFC_GPIO_ENABLE,
+	NFC_GPIO_FW_RESET,
+	NFC_GPIO_IRQ
+};
+
+/* board config */
+struct pn544_nfc_platform_data {
+	int (*request_resources) (struct i2c_client *client);
+	void (*free_resources) (void);
+	void (*enable) (int fw);
+	int (*test) (void);
+	void (*disable) (void);
+	int (*get_gpio)(int type);
+};
+
+#endif /* _PN544_H_ */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index a0525019e1d1..6ecfa02ddbac 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -485,7 +485,7 @@
 #define  SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT	4
 #define  SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL	0x0020
 #define  SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT	5
-#define SSB_SPROM8_TEMPDELTA		0x00BA
+#define SSB_SPROM8_TEMPDELTA		0x00BC
 #define  SSB_SPROM8_TEMPDELTA_PHYCAL	0x00ff
 #define  SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT	0
 #define  SSB_SPROM8_TEMPDELTA_PERIOD	0x0f00