Merge tag 'mlx5-updates-2021-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-10-04

Misc updates for mlx5 driver

1) Add TX max rate support for MQPRIO channel mode
2) Trivial TC action and modify header refactoring
3) TC support for accept action in fdb offloads
4) Allow single IRQ for PCI functions

5) Bridge offload: Pop PVID VLAN header on egress miss

Vlad Buslov says:
=================

With current architecture of mlx5 bridge offload it is possible for a
packet to match in ingress table by source MAC (resulting VLAN header push
in case of port with configured PVID) and then miss in egress table when
destination MAC is not in FDB. Due to the lack of hardware learning in
NICs, this, in turn, results packet going to software data path with PVID
VLAN already added by hardware. This doesn't break software bridge since it
accepts either untagged packets or packets with any provisioned VLAN on
ports with PVID, but can break ingress TC, if affected part of Ethernet
header is matched by classifier.

Improve compatibility with software TC by restoring the packet header on
egress miss. Effectively, this change implements atomicity of mlx5 bridge
offload implementation - packet is either modified and redirected to
destination port or appears unmodified in software.

=================

=================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 11 insertions, 1 deletions

diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index e23417424373..0ca719c00824 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -59,6 +59,8 @@
 
 #define MLX5_ADEV_NAME "mlx5_core"
 
+#define MLX5_IRQ_EQ_CTRL (U8_MAX)
+
 enum {
 	MLX5_BOARD_ID_LEN = 64,
 };
diff --git a/include/linux/mlx5/eq.h b/include/linux/mlx5/eq.h
index cea6ecb4b73e..ea3ff5a8ced3 100644
--- a/include/linux/mlx5/eq.h
+++ b/include/linux/mlx5/eq.h
@@ -4,7 +4,6 @@
 #ifndef MLX5_CORE_EQ_H
 #define MLX5_CORE_EQ_H
 
-#define MLX5_IRQ_VEC_COMP_BASE 1
 #define MLX5_NUM_CMD_EQE   (32)
 #define MLX5_NUM_ASYNC_EQE (0x1000)
 #define MLX5_NUM_SPARE_EQE (0x80)
diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h
index 4ab5c1fc1270..97afcea39a7b 100644
--- a/include/linux/mlx5/eswitch.h
+++ b/include/linux/mlx5/eswitch.h
@@ -130,11 +130,20 @@ u32 mlx5_eswitch_get_vport_metadata_for_set(struct mlx5_eswitch *esw,
 #define ESW_TUN_OPTS_MASK GENMASK(31 - ESW_TUN_ID_BITS - ESW_RESERVED_BITS, ESW_TUN_OPTS_OFFSET)
 #define ESW_TUN_MASK GENMASK(31 - ESW_RESERVED_BITS, ESW_TUN_OFFSET)
 #define ESW_TUN_ID_SLOW_TABLE_GOTO_VPORT 0 /* 0 is not a valid tunnel id */
+#define ESW_TUN_ID_BRIDGE_INGRESS_PUSH_VLAN ESW_TUN_ID_SLOW_TABLE_GOTO_VPORT
 /* 0x7FF is a reserved mapping */
 #define ESW_TUN_OPTS_SLOW_TABLE_GOTO_VPORT GENMASK(ESW_TUN_OPTS_BITS - 1, 0)
 #define ESW_TUN_SLOW_TABLE_GOTO_VPORT ((ESW_TUN_ID_SLOW_TABLE_GOTO_VPORT << ESW_TUN_OPTS_BITS) | \
 				       ESW_TUN_OPTS_SLOW_TABLE_GOTO_VPORT)
 #define ESW_TUN_SLOW_TABLE_GOTO_VPORT_MARK ESW_TUN_OPTS_MASK
+/* 0x7FE is a reserved mapping for bridge ingress push vlan mark */
+#define ESW_TUN_OPTS_BRIDGE_INGRESS_PUSH_VLAN (ESW_TUN_OPTS_SLOW_TABLE_GOTO_VPORT - 1)
+#define ESW_TUN_BRIDGE_INGRESS_PUSH_VLAN ((ESW_TUN_ID_BRIDGE_INGRESS_PUSH_VLAN << \
+					   ESW_TUN_OPTS_BITS) | \
+					  ESW_TUN_OPTS_BRIDGE_INGRESS_PUSH_VLAN)
+#define ESW_TUN_BRIDGE_INGRESS_PUSH_VLAN_MARK \
+	GENMASK(31 - ESW_TUN_ID_BITS - ESW_RESERVED_BITS, \
+		ESW_TUN_OPTS_OFFSET + 1)
 
 u8 mlx5_eswitch_mode(struct mlx5_core_dev *dev);
 u16 mlx5_eswitch_get_total_vports(const struct mlx5_core_dev *dev);