Merge branch 'udp_tunnel-add-NIC-RX-port-offload-infrastructure'

Jakub Kicinski says:

====================
udp_tunnel: add NIC RX port offload infrastructure

Kernel has a facility to notify drivers about the UDP tunnel ports
so that devices can recognize tunneled packets. This is important
mostly for RX - devices which don't support CHECKSUM_COMPLETE can
report checksums of inner packets, and compute RSS over inner headers.
Some drivers also match the UDP tunnel ports also for TX, although
doing so may lead to false positives and negatives.

Unfortunately the user experience when trying to take adavantage
of these facilities is suboptimal. First of all there is no way
for users to check which ports are offloaded. Many drivers resort
to printing messages to aid debugging, other use debugfs. Even worse
the availability of the RX features (NETIF_F_RX_UDP_TUNNEL_PORT)
is established purely on the basis of the driver having the ndos
installed. For most drivers, however, the ability to perform offloads
is contingent on device capabilities (driver support multiple device
and firmware versions). Unless driver resorts to hackish clearing
of features set incorrectly by the core - users are left guessing
whether their device really supports UDP tunnel port offload or not.

There is currently no way to indicate or configure whether RX
features include just the checksum offload or checksum and using
inner headers for RSS. Many drivers default to not using inner
headers for RSS because most implementations populate the source
port with entropy from the inner headers. This, however, is not
always the case, for example certain switches are only able to
use a fixed source port during encapsulation.

We have also seen many driver authors get the intricacies of UDP
tunnel port offloads wrong. Most commonly the drivers forget to
perform reference counting, or take sleeping locks in the callbacks.

This work tries to improve the situation by pulling the UDP tunnel
port table maintenance out of the drivers. It turns out that almost
all drivers maintain a fixed size table of ports (in most cases one
per tunnel type), so we can take care of all the refcounting in the
core, and let the driver specify if they need to sleep in the
callbacks or not. The new common implementation will also support
replacing ports - when a port is removed from a full table it will
try to find a previously missing port to take its place.

This patch only implements the core functionality along with a few
drivers I was hoping to test manually [1] along with a test based
on a netdevsim implementation. Following patches will convert all
the drivers. Once that's complete we can remove the ndos, and rely
directly on the new infrastrucutre.

Then after RSS (RXFH) is converted to netlink we can add the ability
to configure the use of inner RSS headers for UDP tunnels.

[1] Unfortunately I wasn't able to, turns out 2 of the devices
I had access to were older generation or had old FW, and they
did not actually support UDP tunnel port notifications (see
the second paragraph). The thrid device appears to program
the UDP ports correctly but it generates bad UDP checksums with
or without these patches. Long story short - I'd appreciate
reviews and testing here..

v4:
 - better build fix (hopefully this one does it..)
v3:
 - fix build issue;
 - improve bnxt changes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 786 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
new file mode 100644
index 000000000000..ba1d53b9f815
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
@@ -0,0 +1,786 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+VNI_GEN=$RANDOM
+NSIM_ID=$((RANDOM % 1024))
+NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID
+NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID
+NSIM_NETDEV=
+HAS_ETHTOOL=
+EXIT_STATUS=0
+num_cases=0
+num_errors=0
+
+clean_up_devs=( )
+
+function err_cnt {
+    echo "ERROR:" $@
+    EXIT_STATUS=1
+    ((num_errors++))
+    ((num_cases++))
+}
+
+function pass_cnt {
+    ((num_cases++))
+}
+
+function cleanup_tuns {
+    for dev in "${clean_up_devs[@]}"; do
+	[ -e /sys/class/net/$dev ] && ip link del dev $dev
+    done
+    clean_up_devs=( )
+}
+
+function cleanup_nsim {
+    if [ -e $NSIM_DEV_SYS ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/del_device
+    fi
+}
+
+function cleanup {
+    cleanup_tuns
+    cleanup_nsim
+}
+
+trap cleanup EXIT
+
+function new_vxlan {
+    local dev=$1
+    local dstport=$2
+    local lower=$3
+    local ipver=$4
+    local flags=$5
+
+    local group ipfl
+
+    [ "$ipver" != '6' ] && group=239.1.1.1 || group=fff1::1
+    [ "$ipver" != '6' ] || ipfl="-6"
+
+    [[ ! "$flags" =~ "external" ]] && flags="$flags id $((VNI_GEN++))"
+
+    ip $ipfl link add $dev type vxlan \
+       group $group \
+       dev $lower \
+       dstport $dstport \
+       $flags
+
+    ip link set dev $dev up
+
+    clean_up_devs=("${clean_up_devs[@]}" $dev)
+
+    check_tables
+}
+
+function new_geneve {
+    local dev=$1
+    local dstport=$2
+    local ipver=$3
+    local flags=$4
+
+    local group ipfl
+
+    [ "$ipver" != '6' ] && remote=1.1.1.2 || group=::2
+    [ "$ipver" != '6' ] || ipfl="-6"
+
+    [[ ! "$flags" =~ "external" ]] && flags="$flags vni $((VNI_GEN++))"
+
+    ip $ipfl link add $dev type geneve \
+       remote $remote  \
+       dstport $dstport \
+       $flags
+
+    ip link set dev $dev up
+
+    clean_up_devs=("${clean_up_devs[@]}" $dev)
+
+    check_tables
+}
+
+function del_dev {
+    local dev=$1
+
+    ip link del dev $dev
+    check_tables
+}
+
+# Helpers for netdevsim port/type encoding
+function mke {
+    local port=$1
+    local type=$2
+
+    echo $((port << 16 | type))
+}
+
+function pre {
+    local val=$1
+
+    echo -e "port: $((val >> 16))\ttype: $((val & 0xffff))"
+}
+
+function pre_ethtool {
+    local val=$1
+    local port=$((val >> 16))
+    local type=$((val & 0xffff))
+
+    case $type in
+	1)
+	    type_name="vxlan"
+	    ;;
+	2)
+	    type_name="geneve"
+	    ;;
+	4)
+	    type_name="vxlan-gpe"
+	    ;;
+	*)
+	    type_name="bit X"
+	    ;;
+    esac
+
+    echo "port $port, $type_name"
+}
+
+function check_table {
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    local -n expected=$2
+    local last=$3
+
+    read -a have < $path
+
+    if [ ${#expected[@]} -ne ${#have[@]} ]; then
+	echo "check_table: BAD NUMBER OF ITEMS"
+	return 0
+    fi
+
+    for i in "${!expected[@]}"; do
+	if [ -n "$HAS_ETHTOOL" -a ${expected[i]} -ne 0 ]; then
+	    pp_expected=`pre_ethtool ${expected[i]}`
+	    ethtool --show-tunnels $NSIM_NETDEV | grep "$pp_expected" >/dev/null
+	    if [ $? -ne 0 -a $last -ne 0 ]; then
+		err_cnt "ethtool table $1 on port $port: $pfx - $msg"
+		echo "       check_table: ethtool does not contain '$pp_expected'"
+		ethtool --show-tunnels $NSIM_NETDEV
+		return 0
+
+	    fi
+	fi
+
+	if [ ${expected[i]} != ${have[i]} ]; then
+	    if [ $last -ne 0 ]; then
+		err_cnt "table $1 on port $port: $pfx - $msg"
+		echo "       check_table: wrong entry $i"
+		echo "       expected: `pre ${expected[i]}`"
+		echo "       have:     `pre ${have[i]}`"
+		return 0
+	    fi
+	    return 1
+	fi
+    done
+
+    pass_cnt
+    return 0
+}
+
+function check_tables {
+    # Need retries in case we have workqueue making the changes
+    local retries=10
+
+    while ! check_table 0 exp0 $((retries == 0)); do
+	sleep 0.02
+	((retries--))
+    done
+    while ! check_table 1 exp1 $((retries == 0)); do
+	sleep 0.02
+	((retries--))
+    done
+}
+
+function print_table {
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    read -a have < $path
+
+    tree $NSIM_DEV_DFS/
+
+    echo "Port $port table $1:"
+
+    for i in "${!have[@]}"; do
+	echo "    `pre ${have[i]}`"
+    done
+
+}
+
+function print_tables {
+    print_table 0
+    print_table 1
+}
+
+function get_netdev_name {
+    local -n old=$1
+
+    new=$(ls /sys/class/net)
+
+    for netdev in $new; do
+	for check in $old; do
+            [ $netdev == $check ] && break
+	done
+
+	if [ $netdev != $check ]; then
+	    echo $netdev
+	    break
+	fi
+    done
+}
+
+###
+### Code start
+###
+
+# Probe ethtool support
+ethtool -h | grep show-tunnels 2>&1 >/dev/null && HAS_ETHTOOL=y
+
+modprobe netdevsim
+
+# Basic test
+pfx="basic"
+
+for port in 0 1; do
+    old_netdevs=$(ls /sys/class/net)
+    if [ $port -eq 0 ]; then
+	echo $NSIM_ID > /sys/bus/netdevsim/new_device
+    else
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+	echo 1 > $NSIM_DEV_SYS/new_port
+    fi
+    NSIM_NETDEV=`get_netdev_name old_netdevs`
+
+    msg="new NIC device created"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    check_tables
+
+    msg="VxLAN v4 devices"
+    exp0=( `mke 4789 1` 0 0 0 )
+    new_vxlan vxlan0 4789 $NSIM_NETDEV
+    new_vxlan vxlan1 4789 $NSIM_NETDEV
+
+    msg="VxLAN v4 devices go down"
+    exp0=( 0 0 0 0 )
+    ifconfig vxlan1 down
+    ifconfig vxlan0 down
+    check_tables
+
+    msg="VxLAN v6 devices"
+    exp0=( `mke 4789 1` 0 0 0 )
+    new_vxlan vxlanA 4789 $NSIM_NETDEV 6
+
+    for ifc in vxlan0 vxlan1; do
+	ifconfig $ifc up
+    done
+
+    new_vxlan vxlanB 4789 $NSIM_NETDEV 6
+
+    msg="another VxLAN v6 devices"
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    new_vxlan vxlanC 4790 $NSIM_NETDEV 6
+
+    msg="Geneve device"
+    exp1=( `mke 6081 2` 0 0 0 )
+    new_geneve gnv0 6081
+
+    msg="NIC device goes down"
+    ifconfig $NSIM_NETDEV down
+    if [ $port -eq 1 ]; then
+	exp0=( 0 0 0 0 )
+	exp1=( 0 0 0 0 )
+    fi
+    check_tables
+    msg="NIC device goes up again"
+    ifconfig $NSIM_NETDEV up
+    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
+    exp1=( `mke 6081 2` 0 0 0 )
+    check_tables
+
+    cleanup_tuns
+
+    msg="tunnels destroyed"
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+    check_tables
+
+    modprobe -r geneve
+    modprobe -r vxlan
+    modprobe -r udp_tunnel
+
+    check_tables
+done
+
+modprobe -r netdevsim
+
+# Module tests
+pfx="module tests"
+
+if modinfo netdevsim | grep udp_tunnel >/dev/null; then
+    err_cnt "netdevsim depends on udp_tunnel"
+else
+    pass_cnt
+fi
+
+modprobe netdevsim
+
+old_netdevs=$(ls /sys/class/net)
+port=0
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1000 > $NSIM_DEV_DFS/udp_ports_sleep
+echo 0 > $NSIM_DEV_SYS/new_port
+NSIM_NETDEV=`get_netdev_name old_netdevs`
+
+msg="create VxLANs"
+exp0=( 0 0 0 0 ) # sleep is longer than out wait
+new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+modprobe -r vxlan
+modprobe -r udp_tunnel
+
+msg="remove tunnels"
+exp0=( 0 0 0 0 )
+check_tables
+
+msg="create VxLANs"
+exp0=( 0 0 0 0 ) # sleep is longer than out wait
+new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+exp0=( 0 0 0 0 )
+
+modprobe -r netdevsim
+modprobe netdevsim
+
+# Overflow the table
+
+function overflow_table0 {
+    local pfx=$1
+
+    msg="create VxLANs 1/5"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="create VxLANs 2/5"
+    exp0=( `mke 10000 1` `mke 10001 1` 0 0 )
+    new_vxlan vxlan1 10001 $NSIM_NETDEV
+
+    msg="create VxLANs 3/5"
+    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` 0 )
+    new_vxlan vxlan2 10002 $NSIM_NETDEV
+
+    msg="create VxLANs 4/5"
+    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` `mke 10003 1` )
+    new_vxlan vxlan3 10003 $NSIM_NETDEV
+
+    msg="create VxLANs 5/5"
+    new_vxlan vxlan4 10004 $NSIM_NETDEV
+}
+
+function overflow_table1 {
+    local pfx=$1
+
+    msg="create GENEVE 1/5"
+    exp1=( `mke 20000 2` 0 0 0 )
+    new_geneve gnv0 20000
+
+    msg="create GENEVE 2/5"
+    exp1=( `mke 20000 2` `mke 20001 2` 0 0 )
+    new_geneve gnv1 20001
+
+    msg="create GENEVE 3/5"
+    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` 0 )
+    new_geneve gnv2 20002
+
+    msg="create GENEVE 4/5"
+    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` `mke 20003 2` )
+    new_geneve gnv3 20003
+
+    msg="create GENEVE 5/5"
+    new_geneve gnv4 20004
+}
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "overflow NIC table"
+    overflow_table1 "overflow NIC table"
+
+    msg="replace VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+    del_dev vxlan1
+
+    msg="vacate VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+    del_dev vxlan2
+
+    msg="replace GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
+    del_dev gnv1
+
+    msg="vacate GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
+    del_dev gnv2
+
+    msg="table sharing - share"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
+    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"
+
+    msg="table sharing - overflow"
+    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
+    msg="table sharing - overflow v6"
+    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"
+
+    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
+    del_dev gnv4
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Sync all
+pfx="sync all"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1 > $NSIM_DEV_DFS/udp_ports_sync_all
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "overflow NIC table"
+    overflow_table1 "overflow NIC table"
+
+    msg="replace VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
+    del_dev vxlan1
+
+    msg="vacate VxLAN in overflow table"
+    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
+    del_dev vxlan2
+
+    msg="replace GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
+    del_dev gnv1
+
+    msg="vacate GENEVE in overflow table"
+    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
+    del_dev gnv2
+
+    msg="table sharing - share"
+    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
+    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"
+
+    msg="table sharing - overflow"
+    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
+    msg="table sharing - overflow v6"
+    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"
+
+    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
+    del_dev gnv4
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Destroy full NIC
+pfx="destroy full"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    overflow_table0 "destroy NIC"
+    overflow_table1 "destroy NIC"
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# IPv4 only
+pfx="IPv4 only"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+echo 1 > $NSIM_DEV_DFS/udp_ports_ipv4_only
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v6"
+    new_vxlan vxlanA1 10000 $NSIM_NETDEV 6
+
+    ip link set dev vxlanA0 down
+    ip link set dev vxlanA0 up
+    check_tables
+
+    msg="create VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="down VxLANs v4"
+    exp0=( 0 0 0 0 )
+    ip link set dev vxlan0 down
+    check_tables
+
+    msg="up VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ip link set dev vxlan0 up
+    check_tables
+
+    msg="destroy VxLANs v4"
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+
+    msg="recreate VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    del_dev vxlanA0
+    del_dev vxlanA1
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# Failures
+pfx="error injection"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+
+    msg="1 - create VxLANs v6"
+    exp0=( 0 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="1 - create VxLANs v4"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="1 - remove VxLANs v4"
+    del_dev vxlan0
+
+    msg="1 - remove VxLANs v6"
+    exp0=( 0 0 0 0 )
+    del_dev vxlanA0
+
+    msg="2 - create GENEVE"
+    exp1=( `mke 20000 2` 0 0 0 )
+    new_geneve gnv0 20000
+
+    msg="2 - destroy GENEVE"
+    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+    exp1=( `mke 20000 2` 0 0 0 )
+    del_dev gnv0
+
+    msg="2 - create second GENEVE"
+    exp1=( 0 `mke 20001 2` 0 0 )
+    new_geneve gnv0 20001
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# netdev flags
+pfx="netdev flags"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v4"
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="turn off"
+    exp0=( 0 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+    check_tables
+
+    msg="turn on"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="remove both"
+    del_dev vxlanA0
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+    check_tables
+
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
+
+    msg="create VxLANs v4 - off"
+    exp0=( 0 0 0 0 )
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    msg="created off - turn on"
+    exp0=( `mke 10000 1` 0 0 0 )
+    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
+    check_tables
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+cleanup_nsim
+
+# device initiated reset
+pfx="reset notification"
+
+echo $NSIM_ID > /sys/bus/netdevsim/new_device
+echo 0 > $NSIM_DEV_SYS/del_port
+
+for port in 0 1; do
+    if [ $port -ne 0 ]; then
+	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
+	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
+    fi
+
+    echo $port > $NSIM_DEV_SYS/new_port
+    ifconfig $NSIM_NETDEV up
+
+    msg="create VxLANs v6"
+    exp0=( `mke 10000 1` 0 0 0 )
+    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
+
+    msg="create VxLANs v4"
+    new_vxlan vxlan0 10000 $NSIM_NETDEV
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="NIC device goes down"
+    ifconfig $NSIM_NETDEV down
+    if [ $port -eq 1 ]; then
+	exp0=( 0 0 0 0 )
+	exp1=( 0 0 0 0 )
+    fi
+    check_tables
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="NIC device goes up again"
+    ifconfig $NSIM_NETDEV up
+    exp0=( `mke 10000 1` 0 0 0 )
+    check_tables
+
+    msg="remove both"
+    del_dev vxlanA0
+    exp0=( 0 0 0 0 )
+    del_dev vxlan0
+    check_tables
+
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    check_tables
+
+    msg="destroy NIC"
+    echo $port > $NSIM_DEV_SYS/del_port
+
+    cleanup_tuns
+    exp0=( 0 0 0 0 )
+    exp1=( 0 0 0 0 )
+done
+
+modprobe -r netdevsim
+
+if [ $num_errors -eq 0 ]; then
+    echo "PASSED all $num_cases checks"
+else
+    echo "FAILED $num_errors/$num_cases checks"
+fi
+
+exit $EXIT_STATUS