diff options
Diffstat (limited to 'include/linux/platform_data')
32 files changed, 230 insertions, 196 deletions
diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h index 02bef5177ff5..69e261e2ca14 100644 --- a/include/linux/platform_data/ad5761.h +++ b/include/linux/platform_data/ad5761.h @@ -3,7 +3,7 @@ * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter * * Copyright 2016 Qtechnology A/S - * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com> + * 2016 Ricardo Ribalda <ribalda@kernel.org> */ #ifndef __LINUX_PLATFORM_DATA_AD5761_H__ #define __LINUX_PLATFORM_DATA_AD5761_H__ diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-fch.h index 7cdb6a402b35..b9f682459f08 100644 --- a/include/linux/platform_data/clk-st.h +++ b/include/linux/platform_data/clk-fch.h @@ -1,17 +1,18 @@ /* SPDX-License-Identifier: MIT */ /* - * clock framework for AMD Stoney based clock + * clock framework for AMD misc clocks * * Copyright 2018 Advanced Micro Devices, Inc. */ -#ifndef __CLK_ST_H -#define __CLK_ST_H +#ifndef __CLK_FCH_H +#define __CLK_FCH_H #include <linux/compiler.h> -struct st_clk_data { +struct fch_clk_data { void __iomem *base; + u32 is_rv; }; -#endif /* __CLK_ST_H */ +#endif /* __CLK_FCH_H */ diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h deleted file mode 100644 index addd48cac625..000000000000 --- a/include/linux/platform_data/clk-integrator.h +++ /dev/null @@ -1,2 +0,0 @@ -void integrator_impd1_clk_init(void __iomem *base, unsigned int id); -void integrator_impd1_clk_exit(unsigned int id); diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 69210881ebac..1fcfe9e63cb9 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -4917,15 +4917,26 @@ struct ec_response_usb_pd_control_v1 { #define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */ #define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */ +/* Active/Passive Cable */ +#define USB_PD_CTRL_ACTIVE_CABLE BIT(0) +/* Optical/Non-optical cable */ +#define USB_PD_CTRL_OPTICAL_CABLE BIT(1) +/* 3rd Gen TBT device (or AMA)/2nd gen tbt Adapter */ +#define USB_PD_CTRL_TBT_LEGACY_ADAPTER BIT(2) +/* Active Link Uni-Direction */ +#define USB_PD_CTRL_ACTIVE_LINK_UNIDIR BIT(3) + struct ec_response_usb_pd_control_v2 { uint8_t enabled; uint8_t role; uint8_t polarity; char state[32]; - uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */ - uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ - /* CL:1500994 Current cable type */ - uint8_t reserved_cable_type; + uint8_t cc_state; /* enum pd_cc_states representing cc state */ + uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ + uint8_t reserved; /* Reserved for future use */ + uint8_t control_flags; /* USB_PD_CTRL_*flags */ + uint8_t cable_speed; /* TBT_SS_* cable speed */ + uint8_t cable_gen; /* TBT_GEN3_* cable rounded support */ } __ec_align1; #define EC_CMD_USB_PD_PORTS 0x0102 @@ -5207,11 +5218,15 @@ struct ec_params_usb_pd_mux_info { } __ec_align1; /* Flags representing mux state */ -#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */ -#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ -#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ -#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ -#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */ +#define USB_PD_MUX_NONE 0 /* Open switch */ +#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */ +#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ +#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ +#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ +#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */ +#define USB_PD_MUX_SAFE_MODE BIT(5) /* DP is in safe mode */ +#define USB_PD_MUX_TBT_COMPAT_ENABLED BIT(6) /* TBT compat enabled */ +#define USB_PD_MUX_USB4_ENABLED BIT(7) /* USB4 enabled */ struct ec_response_usb_pd_mux_info { uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ @@ -5431,6 +5446,89 @@ struct ec_response_rollback_info { #define EC_CMD_AP_RESET 0x0125 /*****************************************************************************/ +/* Voltage regulator controls */ + +/* + * Get basic info of voltage regulator for given index. + * + * Returns the regulator name and supported voltage list in mV. + */ +#define EC_CMD_REGULATOR_GET_INFO 0x012C + +/* Maximum length of regulator name */ +#define EC_REGULATOR_NAME_MAX_LEN 16 + +/* Maximum length of the supported voltage list. */ +#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16 + +struct ec_params_regulator_get_info { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_info { + char name[EC_REGULATOR_NAME_MAX_LEN]; + uint16_t num_voltages; + uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT]; +} __ec_align2; + +/* + * Configure the regulator as enabled / disabled. + */ +#define EC_CMD_REGULATOR_ENABLE 0x012D + +struct ec_params_regulator_enable { + uint32_t index; + uint8_t enable; +} __ec_align4; + +/* + * Query if the regulator is enabled. + * + * Returns 1 if the regulator is enabled, 0 if not. + */ +#define EC_CMD_REGULATOR_IS_ENABLED 0x012E + +struct ec_params_regulator_is_enabled { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_is_enabled { + uint8_t enabled; +} __ec_align1; + +/* + * Set voltage for the voltage regulator within the range specified. + * + * The driver should select the voltage in range closest to min_mv. + * + * Also note that this might be called before the regulator is enabled, and the + * setting should be in effect after the regulator is enabled. + */ +#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F + +struct ec_params_regulator_set_voltage { + uint32_t index; + uint32_t min_mv; + uint32_t max_mv; +} __ec_align4; + +/* + * Get the currently configured voltage for the voltage regulator. + * + * Note that this might be called before the regulator is enabled, and this + * should return the configured output voltage if the regulator is enabled. + */ +#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130 + +struct ec_params_regulator_get_voltage { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_voltage { + uint32_t voltage_mv; +} __ec_align4; + +/*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ /*****************************************************************************/ diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index 383243326676..4a415ae851ef 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -216,9 +216,6 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, int cros_ec_check_result(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); -int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, - struct cros_ec_command *msg); - int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); diff --git a/include/linux/platform_data/davinci-cpufreq.h b/include/linux/platform_data/davinci-cpufreq.h index 3fbf9f2793b5..bc208c64e3d7 100644 --- a/include/linux/platform_data/davinci-cpufreq.h +++ b/include/linux/platform_data/davinci-cpufreq.h @@ -2,7 +2,7 @@ /* * TI DaVinci CPUFreq platform support. * - * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ + * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/ */ #ifndef _MACH_DAVINCI_CPUFREQ_H diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index 7fe80f1c7e08..5d1fb0d78a22 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -1,7 +1,7 @@ /* * TI DaVinci Audio Serial Port support * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index f3eaf9ec00a1..fbbeb2f6189b 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -8,10 +8,15 @@ #ifndef _PLATFORM_DATA_DMA_DW_H #define _PLATFORM_DATA_DMA_DW_H -#include <linux/device.h> +#include <linux/bits.h> +#include <linux/types.h> #define DW_DMA_MAX_NR_MASTERS 4 #define DW_DMA_MAX_NR_CHANNELS 8 +#define DW_DMA_MIN_BURST 1 +#define DW_DMA_MAX_BURST 256 + +struct device; /** * struct dw_dma_slave - Controller-specific information about a slave @@ -42,6 +47,8 @@ struct dw_dma_slave { * @data_width: Maximum data width supported by hardware per AHB master * (in bytes, power of 2) * @multi_block: Multi block transfers supported by hardware per channel. + * @max_burst: Maximum value of burst transaction size supported by hardware + * per channel (in units of CTL.SRC_TR_WIDTH/CTL.DST_TR_WIDTH). * @protctl: Protection control signals setting per channel. */ struct dw_dma_platform_data { @@ -56,6 +63,7 @@ struct dw_dma_platform_data { unsigned char nr_masters; unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; unsigned char multi_block[DW_DMA_MAX_NR_CHANNELS]; + u32 max_burst[DW_DMA_MAX_NR_CHANNELS]; #define CHAN_PROTCTL_PRIVILEGED BIT(0) #define CHAN_PROTCTL_BUFFERABLE BIT(1) #define CHAN_PROTCTL_CACHEABLE BIT(2) diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index 0f491d8abfdd..3cc78f0447b1 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -2,7 +2,7 @@ /* * BCH Error Location Module * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef __ELM_H diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h index a93841bfb9f7..e182a46e609f 100644 --- a/include/linux/platform_data/gpio-davinci.h +++ b/include/linux/platform_data/gpio-davinci.h @@ -1,7 +1,7 @@ /* * DaVinci GPIO Platform Related Defines * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h index 3c606c450d05..ff1be737bad6 100644 --- a/include/linux/platform_data/gpio-dwapb.h +++ b/include/linux/platform_data/gpio-dwapb.h @@ -12,7 +12,6 @@ struct dwapb_port_property { unsigned int ngpio; unsigned int gpio_base; int irq[32]; - bool has_irq; bool irq_shared; }; diff --git a/include/linux/platform_data/gpio/gpio-amd-fch.h b/include/linux/platform_data/gpio/gpio-amd-fch.h index 9e46678edb2a..255d51c9d36d 100644 --- a/include/linux/platform_data/gpio/gpio-amd-fch.h +++ b/include/linux/platform_data/gpio/gpio-amd-fch.h @@ -19,7 +19,7 @@ #define AMD_FCH_GPIO_REG_GPIO49 0x40 #define AMD_FCH_GPIO_REG_GPIO50 0x41 #define AMD_FCH_GPIO_REG_GPIO51 0x42 -#define AMD_FCH_GPIO_REG_GPIO59_DEVSLP0 0x43 +#define AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 0x43 #define AMD_FCH_GPIO_REG_GPIO57 0x44 #define AMD_FCH_GPIO_REG_GPIO58 0x45 #define AMD_FCH_GPIO_REG_GPIO59_DEVSLP1 0x46 diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h index ef663e570552..c9cc4e32435d 100644 --- a/include/linux/platform_data/gpmc-omap.h +++ b/include/linux/platform_data/gpmc-omap.h @@ -2,7 +2,7 @@ /* * OMAP GPMC Platform data * - * Copyright (C) 2014 Texas Instruments, Inc. - http://www.ti.com + * Copyright (C) 2014 Texas Instruments, Inc. - https://www.ti.com * Roger Quadros <rogerq@ti.com> */ diff --git a/include/linux/platform_data/gsc_hwmon.h b/include/linux/platform_data/gsc_hwmon.h new file mode 100644 index 000000000000..37a8f554da00 --- /dev/null +++ b/include/linux/platform_data/gsc_hwmon.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _GSC_HWMON_H +#define _GSC_HWMON_H + +enum gsc_hwmon_mode { + mode_temperature, + mode_voltage_24bit, + mode_voltage_raw, + mode_voltage_16bit, + mode_max, +}; + +/** + * struct gsc_hwmon_channel - configuration parameters + * @reg: I2C register offset + * @mode: channel mode + * @name: channel name + * @mvoffset: voltage offset + * @vdiv: voltage divider array (2 resistor values in milli-ohms) + */ +struct gsc_hwmon_channel { + unsigned int reg; + unsigned int mode; + const char *name; + unsigned int mvoffset; + unsigned int vdiv[2]; +}; + +/** + * struct gsc_hwmon_platform_data - platform data for gsc_hwmon driver + * @channels: pointer to array of gsc_hwmon_channel structures + * describing channels + * @nchannels: number of elements in @channels array + * @vreference: voltage reference (mV) + * @resolution: ADC bit resolution + * @fan_base: register base for FAN controller + */ +struct gsc_hwmon_platform_data { + const struct gsc_hwmon_channel *channels; + int nchannels; + unsigned int resolution; + unsigned int vreference; + unsigned int fan_base; +}; +#endif diff --git a/include/linux/platform_data/i2c-pxa.h b/include/linux/platform_data/i2c-pxa.h index 6a9b28399b39..24953981bd9f 100644 --- a/include/linux/platform_data/i2c-pxa.h +++ b/include/linux/platform_data/i2c-pxa.h @@ -7,54 +7,6 @@ #ifndef _I2C_PXA_H_ #define _I2C_PXA_H_ -#if 0 -#define DEF_TIMEOUT 3 -#else -/* need a longer timeout if we're dealing with the fact we may well be - * looking at a multi-master environment -*/ -#define DEF_TIMEOUT 32 -#endif - -#define BUS_ERROR (-EREMOTEIO) -#define XFER_NAKED (-ECONNREFUSED) -#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ - -/* ICR initialize bit values -* -* 15. FM 0 (100 Khz operation) -* 14. UR 0 (No unit reset) -* 13. SADIE 0 (Disables the unit from interrupting on slave addresses -* matching its slave address) -* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration -* in master mode) -* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) -* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) -* 9. IRFIE 1 (Enable interrupts from full buffer received) -* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) -* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) -* 6. IUE 0 (Disable unit until we change settings) -* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) -* 4. MA 0 (Only send stop with the ICR stop bit) -* 3. TB 0 (We are not transmitting a byte initially) -* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) -* 1. STOP 0 (Do not send a STOP) -* 0. START 0 (Do not send a START) -* -*/ -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) - -/* I2C status register init values - * - * 10. BED 1 (Clear bus error detected) - * 9. SAD 1 (Clear slave address detected) - * 7. IRF 1 (Clear IDBR Receive Full) - * 6. ITE 1 (Clear IDBR Transmit Empty) - * 5. ALD 1 (Clear Arbitration Loss Detected) - * 4. SSD 1 (Clear Slave Stop Detected) - */ -#define I2C_ISR_INIT 0x7FF /* status register init */ - struct i2c_pxa_platform_data { unsigned int class; unsigned int use_pio :1; diff --git a/include/linux/platform_data/itco_wdt.h b/include/linux/platform_data/itco_wdt.h index 2ccdce6a4e27..45d860cac2b0 100644 --- a/include/linux/platform_data/itco_wdt.h +++ b/include/linux/platform_data/itco_wdt.h @@ -12,13 +12,16 @@ #define ICH_RES_MEM_OFF 2 #define ICH_RES_MEM_GCS_PMC 0 +/** + * struct itco_wdt_platform_data - iTCO_wdt platform data + * @name: Name of the platform + * @version: iTCO version + * @no_reboot_use_pmc: Use PMC BXT API to set and clear NO_REBOOT bit + */ struct itco_wdt_platform_data { char name[32]; unsigned int version; - /* private data to be passed to update_no_reboot_bit API */ - void *no_reboot_priv; - /* pointer for platform specific no reboot update function */ - int (*update_no_reboot_bit)(void *priv, bool set); + bool no_reboot_use_pmc; }; #endif /* _ITCO_WDT_H_ */ diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 96a787100fda..3441064713a3 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -12,17 +12,26 @@ #ifndef _LEDS_LP55XX_H #define _LEDS_LP55XX_H +#include <linux/gpio/consumer.h> +#include <linux/led-class-multicolor.h> + /* Clock configuration */ #define LP55XX_CLOCK_AUTO 0 #define LP55XX_CLOCK_INT 1 #define LP55XX_CLOCK_EXT 2 +#define LP55XX_MAX_GROUPED_CHAN 4 + struct lp55xx_led_config { const char *name; const char *default_trigger; u8 chan_nr; u8 led_current; /* mA x10, 0 if led is not connected */ u8 max_current; + int num_colors; + unsigned int max_channel; + int color_id[LED_COLOR_ID_MAX]; + int output_num[LED_COLOR_ID_MAX]; }; struct lp55xx_predef_pattern { @@ -49,7 +58,7 @@ enum lp8501_pwr_sel { * @clock_mode : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT * @setup_resources : Platform specific function before enabling the chip * @release_resources : Platform specific function after disabling the chip - * @enable : EN pin control by platform side + * @enable_gpiod : enable GPIO descriptor * @patterns : Predefined pattern data for RGB channels * @num_patterns : Number of patterns * @update_config : Value of CONFIG register @@ -65,7 +74,7 @@ struct lp55xx_platform_data { u8 clock_mode; /* optional enable GPIO */ - int enable_gpio; + struct gpio_desc *enable_gpiod; /* Predefined pattern data */ struct lp55xx_predef_pattern *patterns; diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h index 5bbae85811e2..64f8d14876e0 100644 --- a/include/linux/platform_data/leds-s3c24xx.h +++ b/include/linux/platform_data/leds-s3c24xx.h @@ -10,13 +10,7 @@ #ifndef __LEDS_S3C24XX_H #define __LEDS_S3C24XX_H -#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ -#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ - struct s3c24xx_led_platdata { - unsigned int gpio; - unsigned int flags; - char *name; char *def_trigger; }; diff --git a/include/linux/platform_data/media/omap1_camera.h b/include/linux/platform_data/media/omap1_camera.h deleted file mode 100644 index 386439db68de..000000000000 --- a/include/linux/platform_data/media/omap1_camera.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Header for V4L2 SoC Camera driver for OMAP1 Camera Interface - * - * Copyright (C) 2010, Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> - */ - -#ifndef __MEDIA_OMAP1_CAMERA_H_ -#define __MEDIA_OMAP1_CAMERA_H_ - -#include <linux/bitops.h> - -#define OMAP1_CAMERA_IOSIZE 0x1c - -enum omap1_cam_vb_mode { - OMAP1_CAM_DMA_CONTIG = 0, - OMAP1_CAM_DMA_SG, -}; - -#define OMAP1_CAMERA_MIN_BUF_COUNT(x) ((x) == OMAP1_CAM_DMA_CONTIG ? 3 : 2) - -struct omap1_cam_platform_data { - unsigned long camexclk_khz; - unsigned long lclk_khz_max; - unsigned long flags; -}; - -#define OMAP1_CAMERA_LCLK_RISING BIT(0) -#define OMAP1_CAMERA_RST_LOW BIT(1) -#define OMAP1_CAMERA_RST_HIGH BIT(2) - -#endif /* __MEDIA_OMAP1_CAMERA_H_ */ diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index b8da8aef2446..1af9c01563f9 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -43,10 +43,13 @@ * * TYPE1 HW watchdog implementation exist in old systems. * All new systems have TYPE2 HW watchdog. + * TYPE3 HW watchdog can exist on all systems with new CPLD. + * TYPE3 is selected by WD capability bit. */ enum mlxreg_wdt_type { MLX_WDT_TYPE1, MLX_WDT_TYPE2, + MLX_WDT_TYPE3, }; /** @@ -75,11 +78,13 @@ struct mlxreg_hotplug_device { * @mask: attribute access mask; * @bit: attribute effective bit; * @capability: attribute capability register; + * @reg_prsnt: attribute presence register; * @mode: access mode; * @np - pointer to node platform associated with attribute; * @hpdev - hotplug device data; * @health_cntr: dynamic device health indication counter; * @attached: true if device has been attached after good health indication; + * @regnum: number of registers occupied by multi-register attribute; */ struct mlxreg_core_data { char label[MLXREG_CORE_LABEL_MAX_SIZE]; @@ -87,11 +92,13 @@ struct mlxreg_core_data { u32 mask; u32 bit; u32 capability; + u32 reg_prsnt; umode_t mode; struct device_node *np; struct mlxreg_hotplug_device hpdev; - u8 health_cntr; + u32 health_cntr; bool attached; + u8 regnum; }; /** diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index 0434f68eda86..cba1184b364c 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de> + * Copyright 2010 Wolfram Sang <kernel@pengutronix.de> */ #ifndef __ASM_ARCH_IMX_ESDHC_H diff --git a/include/linux/platform_data/mmc-esdhc-mcf.h b/include/linux/platform_data/mmc-esdhc-mcf.h new file mode 100644 index 000000000000..85cb786a62fe --- /dev/null +++ b/include/linux/platform_data/mmc-esdhc-mcf.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ +#define __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + +struct mcf_esdhc_platform_data { + int max_bus_width; + int cd_type; +}; + +#endif /* __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ */ diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 9acf0e87aa9b..f0b8947e6b07 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -116,3 +116,6 @@ struct omap_mmc_platform_data { } slots[OMAP_MMC_MAX_SLOTS]; }; + +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, + int is_closed); diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h index a403dd51dacc..a49826214a39 100644 --- a/include/linux/platform_data/mtd-davinci-aemif.h +++ b/include/linux/platform_data/mtd-davinci-aemif.h @@ -1,7 +1,7 @@ /* * TI DaVinci AEMIF support * - * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ + * Copyright 2010 (C) Texas Instruments, Inc. https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h index 08e639e047e5..03e92c71b3fa 100644 --- a/include/linux/platform_data/mtd-davinci.h +++ b/include/linux/platform_data/mtd-davinci.h @@ -68,7 +68,7 @@ struct davinci_nand_pdata { /* platform_data */ * Newer ones also support 4-bit ECC, but are awkward * using it with large page chips. */ - nand_ecc_modes_t ecc_mode; + enum nand_ecc_mode ecc_mode; u8 ecc_bits; /* e.g. NAND_BUSWIDTH_16 */ diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h index deb849bcf0ec..08675b16f9e1 100644 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -49,7 +49,7 @@ struct s3c2410_platform_nand { unsigned int ignore_unset_ecc:1; - nand_ecc_modes_t ecc_mode; + enum nand_ecc_mode ecc_mode; int nr_sets; struct s3c2410_nand_set *sets; diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h index 8419c8caf54e..0dd851ea1c72 100644 --- a/include/linux/platform_data/omap-twl4030.h +++ b/include/linux/platform_data/omap-twl4030.h @@ -3,7 +3,7 @@ * omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 * codec, header. * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com * All rights reserved. * * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h deleted file mode 100644 index 02653d92d84f..000000000000 --- a/include/linux/platform_data/sky81452-backlight.h +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * sky81452.h SKY81452 backlight driver - * - * Copyright 2014 Skyworks Solutions Inc. - * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> - */ - -#ifndef _SKY81452_BACKLIGHT_H -#define _SKY81452_BACKLIGHT_H - -/** - * struct sky81452_platform_data - * @name: backlight driver name. - If it is not defined, default name is lcd-backlight. - * @gpio_enable:GPIO number which control EN pin - * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6. - * @ignore_pwm: true if DPWMI should be ignored. - * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode. - * @phase_shift:true is phase shift mode. - * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V. - * @boost_current_limit: It should be one of 2300, 2750mA. - */ -struct sky81452_bl_platform_data { - const char *name; - int gpio_enable; - unsigned int enable; - bool ignore_pwm; - bool dpwm_mode; - bool phase_shift; - unsigned int short_detection_threshold; - unsigned int boost_current_limit; -}; - -#endif diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h deleted file mode 100644 index 328f670d10bd..000000000000 --- a/include/linux/platform_data/spi-imx.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifndef __MACH_SPI_H_ -#define __MACH_SPI_H_ - -/* - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @chipselect: Array of chipselects for this master or NULL. Numbers >= 0 - * mean GPIO pins, -ENOENT means internal CSPI chipselect - * matching the position in the array. E.g., if chipselect[1] = - * -ENOENT then a SPI slave using chip select 1 will use the - * native SS1 line of the CSPI. Omitting the array will use - * all native chip selects. - - * Normally you want to use gpio based chip selects as the CSPI - * module tries to be intelligent about when to assert the - * chipselect: The CSPI module deasserts the chipselect once it - * runs out of input data. The other problem is that it is not - * possible to mix between high active and low active chipselects - * on one single bus using the internal chipselects. - * Unfortunately, on some SoCs, Freescale decided to put some - * chipselects on dedicated pins which are not usable as gpios, - * so we have to support the internal chipselects. - * - * @num_chipselect: If @chipselect is specified, ARRAY_SIZE(chipselect), - * otherwise the number of native chip selects. - */ -struct spi_imx_master { - int *chipselect; - int num_chipselect; -}; - -#endif /* __MACH_SPI_H_*/ diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h index 3d47d219827f..31f2e22661bc 100644 --- a/include/linux/platform_data/uio_pruss.h +++ b/include/linux/platform_data/uio_pruss.h @@ -3,7 +3,7 @@ * * Platform data for uio_pruss driver * - * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2010-11 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h index fa579b4c666b..5e70d667031c 100644 --- a/include/linux/platform_data/usb-omap.h +++ b/include/linux/platform_data/usb-omap.h @@ -1,7 +1,7 @@ /* * usb-omap.h - Platform data for the various OMAP USB IPs * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com * * This software is distributed under the terms of the GNU General Public * License ("GPL") version 2, as published by the Free Software Foundation. diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index d39fc658c320..897b8332a39f 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -85,6 +85,9 @@ /* Maximum charging percentage */ #define ASUS_WMI_DEVID_RSOC 0x00120057 +/* Keyboard dock */ +#define ASUS_WMI_DEVID_KBD_DOCK 0x00120063 + /* DSTS masks */ #define ASUS_WMI_DSTS_STATUS_BIT 0x00000001 #define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002 |