summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'tty-5.19-rc1' of ↵Linus Torvalds2022-06-037-10/+138
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...
| * dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registersPhil Edworthy2022-05-191-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | The RZ/V2M SoC has an additional clock to access the registers. The HW manual says this clock should not be touched as it is used by the "ISP Firmware". Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220512072649.7879-1-phil.edworthy@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge 5.18-rc7 into usb-nextGreg Kroah-Hartman2022-05-161-4/+0
| |\ | | | | | | | | | | | | | | | We need the tty fixes in here as well, as we need to revert one of them :( Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4Geert Uytterhoeven2022-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/c57ed00e85778380776330be6183c6861d843c22.1651497024.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4Geert Uytterhoeven2022-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/dd734aaa4e5e0b32864b038b79eafe72907fb99f.1651497024.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt_bindings: rs485: Add receiver enable polarityIlpo Järvinen2022-04-261-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add polarity property for receiver enable. Some UARTs have separate enable pins for tx (RTS or DE) and rx (RE). As most RS485 transceivers have !RE pin, the default is active low in contrast to rs485-rts-active-low that defaults to active high. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220426122448.38997-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,hscif: Document r8a779g0 bindingsYoshihiro Shimoda2022-04-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | R-Car V4H (R8A779G0) SoC has the R-Car Gen4 compatible HSCIF ports, so document the SoC specific bindings. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220425064201.459633-4-yoshihiro.shimoda.uh@renesas.com Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: Update Qualcomm geni based QUP UART bindingsKuldeep Singh2022-04-151-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to I2C controller, move geni based QUP UART controller binding out from parent schema to an individual binding and let parent refer to child schema later on. UART binding also stand incomplete right now similar to I2C, complete it along this process. Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220404182938.29492-4-singh.kuldeep87k@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,em-uart: Document r9a09g011 bindingsPhil Edworthy2022-04-151-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Renesas RZ/V2M (r9a09g011) SoC uses a uart that is compatible with the EMMA Mobile SoC. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220330154024.112270-3-phil.edworthy@renesas.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: fsl-lpuart: Add imx93 compatible stringPeng Fan2022-04-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lpuart on i.MX93 is derived from i.MX7ULP with some industrial enhancements, it uses two compatible strings, so update the compatible string for i.MX93. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220323093659.1722463-1-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: uniphier: Add "resets" property as optionalKunihiko Hayashi2022-04-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UniPhier UART controller has a reset lines from system controller. Add "resets" property to fix the following warning. uniphier-ld11-global.dtb: serial@54006800: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1648617338-8600-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: uniphier: Use maxItems for a single clockKunihiko Hayashi2022-04-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | 'maxItems' is preferred for a single entry, not 'minItems'. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1648617338-8600-2-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | dt-bindings: Fix properties without any typeRob Herring2022-05-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the schema tools can extract type information for all properties (in order to decode dtb files), finding properties missing any type definition is fairly trivial though not yet automated. Fix the various property schemas which are missing a type. Most of these tend to be device specific properties which don't have a vendor prefix. A vendor prefix is how we normally ensure a type is defined. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> # for everything in .../bindings/display/ Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220519211411.2200720-1-robh@kernel.org
* | | Merge branch 'dt/linus' into dt/nextRob Herring2022-05-091-4/+0
|\ \ \ | | |/ | |/| | | | Pick up new meta-schema fixes.
| * | dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemasRob Herring2022-05-041-4/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another round of removing redundant minItems/maxItems when 'items' list is specified. This time it is in if/then schemas as the meta-schema was failing to check this case. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Signed-off-by: Rob Herring <robh@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Link: https://lore.kernel.org/r/20220503162738.3827041-1-robh@kernel.org
* | dt-bindings: serial: qcom,msm-uartdm: convert to dtschemaKrzysztof Kozlowski2022-04-072-81/+112
| | | | | | | | | | | | | | | | | | Convert the Qualcomm MSM Serial UARTDM bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220405063451.12011-8-krzysztof.kozlowski@linaro.org
* | dt-bindings: white-space cleanupsKrzysztof Kozlowski2022-04-041-1/+1
|/ | | | | | | | | | Remove trailing white-spaces and trailing blank lines (yamllint with default options does not like them). Suggested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220402192819.154691-1-krzysztof.kozlowski@linaro.org
* Merge tag 'clk-for-linus' of ↵Linus Torvalds2022-03-301-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...
| * dt-bindings: change the macro name of prci in header files and exampleZong Li2022-03-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | We currently change the macro name for fu540 and fu740 by adding the prefix respectively, the dt-bindings should be modified as well. Signed-off-by: Zong Li <zong.li@sifive.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/f9284873c2993a9952d9fe4f8dd5e89f20daab75.1646388139.git.zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | Merge tag 'tty-5.18-rc1' of ↵Linus Torvalds2022-03-287-11/+76
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver changes for 5.18-rc1. Nothing major, some more good cleanups from Jiri and 2 new serial drivers. Highlights include: - termbits cleanups - export symbol cleanups and other core cleanups from Jiri Slaby - new sunplus and mvebu uart drivers (amazing that people are still creating new uarts...) - samsung serial driver cleanups - ldisc 29 is now "reserved" for experimental/development line disciplines - lots of other tiny fixes and cleanups to serial drivers and bindings All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits) vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE serial: 8250: fix XOFF/XON sending when DMA is used tty: serial: samsung: Add ARTPEC-8 support dt-bindings: serial: samsung: Add ARTPEC-8 UART serial: sc16is7xx: Clear RS485 bits in the shutdown tty: serial: samsung: simplify getting OF match data tty: serial: samsung: constify variables and pointers tty: serial: samsung: constify s3c24xx_serial_drv_data members tty: serial: samsung: constify UART name tty: serial: samsung: constify s3c24xx_serial_drv_data tty: serial: samsung: reduce number of casts tty: serial: samsung: embed s3c2410_uartcfg in parent structure tty: serial: samsung: embed s3c24xx_uart_info in parent structure serial: 8250_tegra: mark acpi_device_id as unused with !ACPI tty: serial: bcm63xx: use more precise Kconfig symbol serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS tty: serial: jsm: fix two assignments in if conditions tty: serial: jsm: remove redundant assignments to variable linestatus serial: 8250_mtk: make two read-only arrays static const serial: samsung_tty: do not unlock port->lock for uart_write_wakeup() ...
| * | dt-bindings: serial: samsung: Add ARTPEC-8 UARTVincent Whitchurch2022-03-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a compatible for the UART on the ARTPEC-8 SoC. This hardware block is closely related to the variants used on the Exynos chips. The register layout is identical to Exynos850 et al but the fifo size is different (64 bytes in each direction for all instances). Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220311094515.3223023-2-vincent.whitchurch@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: Add bindings doc for Sunplus SoC UART DriverHammer Hsieh2022-02-261-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add bindings doc for Sunplus SoC UART Driver Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com> Link: https://lore.kernel.org/r/1645522563-17183-2-git-send-email-hammerh0314@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: mvebu-uart: update information about UART clockPali Rohár2022-02-251-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device "marvell,armada-3700-uart" should use "marvell,armada-3700-uart-clock" compatible clock. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20220219152818.4319-5-kabel@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enumAbel Vesa2022-02-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.MX8QM lpuart is backwards compatible with i.MX8QXP, so lets remove the single match from enum. This will force nodes to have both compatible strings, since there is already an 'items' entry for that. Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220210201407.567860-2-abel.vesa@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibilityAbel Vesa2022-02-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop the i.MX8QXP backwards compatibility with i.MX7ULP since they differ from clocks handling point of view. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220210201407.567860-1-abel.vesa@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,sci: Document RZ/G2UL SoCBiju Das2022-02-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SCI binding documentation for Renesas RZ/G2UL SoC. No driver changes are required as generic compatible string "renesas,sci" will be used as a fallback. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220207142213.19552-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,scif: Document RZ/G2UL SoCBiju Das2022-02-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SCIF binding documentation for Renesas RZ/G2UL SoC. SCIF block on RZ/G2UL is identical to one found on the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible string "renesas,scif-r9a07g044" will be used as a fallback. Whilst dropped the comments after RZ/G2{L,LC} fallback as to avoid updating the comment over and over again when a new IP is added Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220207142213.19552-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,scif: Remove redundant renesas,scif-r9a07g054Biju Das2022-02-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes redundant "renesas,scif-r9a07g054" from binding documentation as it uses renesas,scif-r9a07g044 fallback. Whilst remove the additional renesas,scif-r9a07g054 from Items. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220207142213.19552-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatibleAbel Vesa2022-02-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8DXL lpuart compatible to the bindings documentation. Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220118131715.2051965-1-abel.vesa@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: samsung_uart: Document Exynos5433 compatibleKrzysztof Kozlowski2022-02-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document the Exynos5433 UART compatible, supported since commit 31ec77aca72e ("serial: samsung: Add the support for Exynos5433 SoC"). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220202151310.285561-2-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: Add compatible for Mediatek MT8186Allen-KH Cheng2022-01-311-0/+1
| |/ | | | | | | | | | | | | | | | | This commit adds dt-binding documentation of uart for Mediatek MT8186 SoC Platform. Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com> Link: https://lore.kernel.org/r/20220128062050.23978-3-allen-kh.cheng@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / dt-bindings: serial: Convert rda,8810pl-uart to YAMLStanislav Jakubek2022-01-232-17/+46
|/ | | | | | | | Convert RDA Micro UART bindings to DT schema format. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220109170321.GA12989@standask-GA-A55M-S2HP
* Merge tag 'devicetree-for-5.17' of ↵Linus Torvalds2022-01-121-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - DT schema conversions for Samsung clocks, RNG bindings, Qcom Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl, Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb - DT schema conversions for Broadcom platforms: interrupt controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux, iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON, SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB arbiter, and SATA - Add binding schemas for Tegra210 EMC table, TI DC-DC converters, - Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues - More fixes due to 'unevaluatedProperties' enabling - Data type fixes and clean-ups of binding examples found in preparation to move to validating DTB files directly (instead of intermediate YAML representation. - Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus - Add various new compatible strings DT core: - Silence a warning for overlapping reserved memory regions - Reimplement unittest overlay tracking - Fix stack frame size warning in unittest - Clean-ups of early FDT scanning functions - Fix handling of "linux,usable-memory-range" on EFI booted systems - Add support for 'fail' status on CPU nodes - Improve error message in of_phandle_iterator_next() - kbuild: Disable duplicate unit-address warnings for disabled nodes" * tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits) dt-bindings: net: mdio: Drop resets/reset-names child properties dt-bindings: clock: samsung: convert S5Pv210 to dtschema dt-bindings: clock: samsung: convert Exynos5410 to dtschema dt-bindings: clock: samsung: convert Exynos5260 to dtschema dt-bindings: clock: samsung: extend Exynos7 bindings with UFS dt-bindings: clock: samsung: convert Exynos7 to dtschema dt-bindings: clock: samsung: convert Exynos5433 to dtschema dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712 dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp' dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example dt-bindings: clock: imx5: Drop clock consumer node from example dt-bindings: Drop required 'interrupt-parent' dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance' dt-bindings: net: wireless: mt76: Fix 8-bit property sizes dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry dt-bindings: net: stm32-dwmac: Make each example a separate entry dt-bindings: net: Cleanup MDIO node schemas ...
| * dt-bindings: Add resets to the PL011 bindingsLinus Walleij2021-12-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | Some PL011 implementations provide a reset line to the silicon IP block, add a device tree property for this. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211120011418.2630449-1-linus.walleij@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
* | Merge tag 'tty-5.17-rc1' of ↵Linus Torvalds2022-01-124-7/+66
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
| * | dt-bindings: serial: renesas,sci: Document RZ/V2L SoCBiju Das2021-12-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SCI binding documentation for Renesas RZ/V2L SoC. No driver changes are required as generic compatible string "renesas,sci" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211221094717.16187-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,scif: Document RZ/V2L SoCBiju Das2021-12-301-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SCIF binding documentation for Renesas RZ/V2L SoC. SCIF block on RZ/V2L is identical to one found on the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible string "renesas,scif-r9a07g044" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211221094717.16187-7-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: amlogic, meson-uart: support S4Xianwei Zhao2021-12-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add serial bindings support menson S4 SoC family. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://lore.kernel.org/r/20211221030146.522-1-xianwei.zhao@amlogic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matchingAbel Vesa2021-12-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX 8QM DTS files use two compatibles, so update the binding to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: serial@5a060000: compatible: ['fsl,imx8qm-lpuart', 'fsl,imx8qxp-lpuart'] is too long Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1639680494-23183-2-git-send-email-abel.vesa@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: fsl-lpuart: add i.MXRT1050 compatibleJesse Taube2021-12-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MXRT1050 documentation for compatible string. Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Link: https://lore.kernel.org/r/20211215220538.4180616-7-Mr.Bossman075@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,scif: Document r8a779f0 bindingsYoshihiro Shimoda2021-12-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | R-Car S4-8 (R8A779F0) SoC has the R-Car Gen4 compatible SCIF ports, so document the SoC specific bindings. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211209070817.1223888-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,sci: Document RZ/G2L SoCLad Prabhakar2021-11-251-6/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SCI binding documentation for Renesas RZ/G2L SoC. Also update the example node with RZ/G2L SCI0 node. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211110232920.19198-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: renesas,scif: Make resets as a required propertyLad Prabhakar2021-11-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make "resets" as required property for RZ/G2L. On RZ/G2L the devices should be explicitly pulled out of reset for this reason make "resets" as required property. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211110232920.19198-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible stringJacky Bai2021-11-251-1/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | The lpuart on i.MX8ULP is derived from i.MX7ULP, it uses two compatible strings, so update the compatible string for i.MX8ULP. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20211120113454.785997-3-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2022-01-101-0/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull RISC-V SoC updates from Arnd Bergmann: "Add support for StarFive JH7100 RISC-V SoC This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one" * tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: starfive-jh7100: Fix 32bit compilation RISC-V: Add BeagleV Starlight Beta device tree RISC-V: Add initial StarFive JH7100 device tree serial: 8250_dw: Add StarFive JH7100 quirk dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts pinctrl: starfive: Add pinctrl driver for StarFive SoCs dt-bindings: pinctrl: Add StarFive JH7100 bindings dt-bindings: pinctrl: Add StarFive pinctrl definitions reset: starfive-jh7100: Add StarFive JH7100 reset driver dt-bindings: reset: Add Starfive JH7100 reset bindings dt-bindings: reset: Add StarFive JH7100 reset definitions clk: starfive: Add JH7100 clock generator driver dt-bindings: clock: starfive: Add JH7100 bindings dt-bindings: clock: starfive: Add JH7100 clock definitions dt-bindings: interrupt-controller: Add StarFive JH7100 plic dt-bindings: timer: Add StarFive JH7100 clint RISC-V: Add StarFive SoC Kconfig option
| * | dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uartsEmil Renner Berthing2021-12-161-0/+5
| |/ | | | | | | | | | | | | | | Add compatibles for the StarFive JH7100 uarts. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
* | dt-bindings: serial: Document Tegra234 TCUThierry Reding2021-12-171-1/+6
| | | | | | | | | | | | | | Add the compatible string for the TCU found on the Tegra234 SoC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | dt-bindings: serial: tegra-tcu: Convert to json-schemaThierry Reding2021-12-172-35/+56
| | | | | | | | | | | | | | Convert the Tegra TCU device tree bindings to json-schema. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | dt-bindings: serial: 8250: Document Tegra234 UARTThierry Reding2021-12-171-1/+2
|/ | | | | | | Add the compatible string for the UART found on the Tegra234 SoC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
* dt-bindings: treewide: Update @st.com email address to @foss.st.comPatrice Chotard2021-11-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all @st.com email address are concerned, only people who have a specific @foss.st.com email will see their entry updated. For some people, who left the company, remove their email. Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Fabien Dessenne <fabien.dessenne@foss.st.com> Cc: Christophe Roullier <christophe.roullier@foss.st.com> Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Cc: Lionel Debieve <lionel.debieve@foss.st.com> Cc: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Cc: Ludovic Barre <ludovic.barre@foss.st.com> Cc: Christophe Kerello <christophe.kerello@foss.st.com> Cc: pascal Paillet <p.paillet@foss.st.com> Cc: Erwan Le Ray <erwan.leray@foss.st.com> Cc: Philippe CORNU <philippe.cornu@foss.st.com> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20211110150144.18272-6-patrice.chotard@foss.st.com Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-09 19:32:51 +0000