| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Nuvia has been acquired by Qualcomm and the vendor name 'nuvia' will
not be used anymore so rename aspeed-bmc-nuvia-dc-scm.dts to
aspeed-bmc-qcom-dc-scm-v1.dts and change 'nuvia' to 'qcom' as its vendor
name in the file.
Fixes: 7b46aa7c008d ("ARM: dts: aspeed: Add Nuvia DC-SCM BMC")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220523175640.60155-1-quic_jaehyoo@quicinc.com
Link: https://lore.kernel.org/r/20220624070511.4070659-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/late
ASPEED device tree updates for 5.19
- New machine:
* Nuvia's DC-SCM BMC
- Enable AST2600 GFX, the BMC-driven graphics device
- Add a bunch of devices for the AST2600 EVB
- Updates to the AST2600 Bletchley machine
- Backwards compatible changes to support the new spi-mem based SPI NOR
driver
* tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: ast2600-evb: Enable GFX device
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable virtual hub
ARM: dts: aspeed: ast2600-evb: Enable video engine
ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO
ARM: dts: aspeed: Add Nuvia DC-SCM BMC
ARM: dts: aspeed: bletchley: add sample averaging for ADM1278
ARM: dts: aspeed: bletchley: add eeprom node on each sled
ARM: dts: aspeed: bletchley: add pca9536 node on each sled
ARM: dts: aspeed: bletchley: update gpio0 line names
ARM: dts: aspeed: bletchley: Enable mdio0 bus
ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
ARM: dts: aspeed: bletchley: enable ehci0 device node
ARM: dts: aspeed: Add USB2.0 device controller node
ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
ARM: dts: aspeed: Enable Dual SPI RX transfers
ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1
Link: https://lore.kernel.org/r/CACPK8XfUmFxU8Y6C+aZ2+=dT7=fCfs2=2_aYqyRjoXCoeQaUWQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add initial version of device tree for Nuvia DC-SCM BMC which is
equipped with Aspeed AST2600 BMC SoC.
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Link: https://lore.kernel.org/r/20220325190247.468079-1-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The HPE SoC is new to linux. A basic device tree layout with minimum
required for linux to boot including a timer and watchdog support has
been created.
The dts file is empty at this point but will be updated in subsequent
updates as board specific features are enabled.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 & LAN966 DT #1 for 5.19:
- at91: DT compliance updates to gic and dataflash nodes
- lan966: addition to many basic nodes for various peripherals
- lan966: Kontron KSwitch D10: support for this new board
and its network switch
* tag 'at91-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
Link: https://lore.kernel.org/r/20220513162338.87717-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add basic support for the Kontron KSwitch D10 MMT. It comes in two
variants: "6G-2GS" which features 6 Gigabit copper ports and two SFP
cages and "8G" which features 6 Gigbabit copper ports (where two are
2.5G capable).
For now the following is supported and working:
- Kernel console
- SFP cages
- SPI
- SGPIO
- Watchdog
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
[claudiu.beznea: fixed conflict on Makefile]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-8-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX ARM device tree update for 5.19:
- New board support: PHYTEC phyGATE-Tauri-S, TQ-Systems MBa6UL,
LS1021A IoT board, Toradex Iris and Aster carrier, i.MX7D SMEGW01,
i.MXRT1050 EVK, Bosch ACC board.
- A series from Alexander Stein to update i.MX51 based digi-connectcore
board, regarding to DMA of UART devices, PMIC voltages, USB
vbus-supply and usbphy.
- A series of changes from David Jander and Oleksij Rempel to remove
prototype specific deprecated code not used in production from
i.MX6Q/DL Vicut1 board, and unify Vicut1 and Victgo variants to reduce
maintaining overhead.
- Quite some changes from different people to update imx6ull-colibri board
on various aspects, touchscreen, device tree overlays, NAND BCH geometry,
GPIO line names, FEC phy-supply, etc.
- A couple of changes from Fabio Estevam to switch imx6dl-plybas and
imx6ul-kontron-n6x1x-s to use standard 'uart-has-rtscts' property.
- A couple of patches from Li Yang to update IFC device compatible and
node name for LayerScape SoCs.
- Disable USB host to work around boot issue on imx6qdl-udoo board.
- A series from Max Krummenacher to update Colibri i.MX6DL device trees,
drop dedicated v1.1 DT, disable add-on accessories, cleanups, etc.
- Various random and small updates on i.MX28 and i.MX6 boards.
* tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
ARM: dts: imx6ull-colibri: improve pinctrl node names
ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi
ARM: dts: imx6ull-colibri: add/update some comments
ARM: dts: imx6ull-colibri: fix nand bch geometry
ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
ARM: dts: imx6ull-colibri: add gpio-line-names
ARM: dts: imx6ull-colibri: update device trees to support overlays
ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
ARM: dts: imx6ull-colibri: add touchscreen device nodes
ARM: dts: imx6ull-colibri: add phy-supply to fec
ARM: dts: imx6ull-colibri: change touch i2c parameters
ARM: dts: imx6ull-colibri: use pull-down for adc pins
ARM: dts: Add bosch acc board
ARM: dts: imx: Add i.MXRT1050-EVK support
ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board
ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues
ARM: dts: imx27: use new 'dma-channels' property
ARM: dts: imx6qdl-phytec: Add LED labels
ARM: dts: ls1021a: reduce the interrupt-map-mask
...
Link: https://lore.kernel.org/r/20220508033843.2773685-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add support for Toradex Aster, small form-factor Colibri Arm
Computer Module family carrier board.
Aster Device Trees:
- imx6ull-colibri-aster.dtb
- imx6ull-colibri-emmc-aster.dtb
- imx6ull-colibri-wifi-aster.dtb
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm
Computer Module family carrier boards.
Iris Device Trees:
- imx6ull-colibri-iris.dtb
- imx6ull-colibri-emmc-iris.dtb
- imx6ull-colibri-wifi-iris.dtb
Iris-V2 Device Trees:
- imx6ull-colibri-iris-v2.dtb
- imx6ull-colibri-emmc-iris-v2.dtb
- imx6ull-colibri-wifi-iris-v2.dtb
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add device tree for the Bosch ACC board, based on i.MX6 Dual.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MXRT, which features NXP's implementation of the Arm
Cortex-M7 core.
The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket,
USB 2.0 OTG.
This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
SD/MMC
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
[Jesse: Add clock-parents, edma, usdhc, anatop, remove old pinctl]
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add support for the i.MX7D SMEGW01 board.
This is a gateway board that supports the following peripherals:
- eMMC / SD card
- RTC
- USB modem
- Wifi via SDIO
- Dual Ethernet
- CAN
- Serial SRAM
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The LS1021A-IoT gateway reference design is a purpose-built,
small footprint hardware platform equipped with a wide array
of both high-speed connectivity and low speed serial interfaces.
CC: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add support for Toradex Aster, small form-factor with header compatible
with Arduino Uno and Raspberry Pi (RPi) maker boards.
Additional detail available at
https://www.toradex.com/products/carrier-boards/aster-carrier-board
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm
Computer Module family Carrier Board.
Additional details available at
https://www.toradex.com/products/carrier-board/iris-carrier-board
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Drop Colibri V1.1 device tree, this is just a duplicate of Colibri V1.0
with the possibility to use SD cards in UHS mode if the carrier board
does not have 3.3V pull up resistor.
The dedicated device tree kept the feature switched of by setting
the no-1-8-v property and thus does not offer anything different
than what the regular device tree does.
Thus drop the dedicated device tree and merge the preparation to
allow enabling the feature should a carrier without pull ups
be used into the regular device tree.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add support for the PHYTEC phyGATE-Tauri-S with i.MX 6ULL with eMMC or
NAND.
Supported features:
* eMMC/NAND
* i2c RTC
* i2c TEMP
* PMIC
* PWM
* debug UART
* CAN
* SD card
* 2x 1Gbit Ethernet
* RS232/RS485
* USB 2.0 Host
* TPM
* SPI-NOR
Signed-off-by: Alexander Bauer <a.bauer@phytec.de>
Signed-off-by: Jens Lang <j.lang@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add device trees for the MBa6ULx mainboard with TQMa6ULLxL SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add device trees for the MBa6ULx mainboard with TQMa6ULLx SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add device trees for the MBa6ULx mainboard with TQMa6ULxL SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | |/
| |
| |
| |
| |
| |
| | |
Add device trees for the MBa6ULx mainboard with TQMa6ULx SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DT updates for v5.19
This contains a long overdue overhaul of the MSM8974 DeviceTrees,
aligning the style, structure and naming with what we've learned since
the introduction of this platform.
On top of this the Sony Rhine platform gained I2C masters, NFC and
pstore support and the Fairphone 2 gained touchscreen support.
For the new SDX65 platform reserved-memory nodes, rpmpd, SPMI, CPU
clocks, SDHCI controller, SMMU and TCSR mutex was added. As was the
initial DeviceTree for the related PMX65 PMIC.
MSM8226 gained VADC and RTC support and support for the ASUS ZenWatch 2
was added.
* tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits)
ARM: dts: qcom: msm8974-FP2: Add supplies for remoteprocs
ARM: dts: qcom: msm8974-FP2: Configure charger
ARM: dts: qcom: msm8974-FP2: Add support for touchscreen
ARM: dts: qcom: sdx55: Remove ipa interconnect node
ARM: dts: qcom: msm8974: Add missing license headers
ARM: dts: qcom: msm8974-FP2: Add mmc* aliases
ARM: dts: qcom: msm8974-FP2: We're msm8974pro
ARM: dts: qcom-msm8974*: Remove unnecessary include
ARM: dts: qcom-msm8974-rhine: Add pstore node
ARM: dts: qcom-msm8974-rhine: Add NFC and enable I2C hosts
ARM: dts: qcom-msm8974*: Clean up old GPIO declarations
ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI
ARM: dts: qcom-msm8974*: Enable IMEM unconditionally
ARM: dts: qcom-msm8974: Sort and clean up nodes
ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device
ARM: dts: qcom-msm8974pro-*: Use the 8974pro name in DT filenames
ARM: dts: qcom-msm8974pro: Use &labels
ARM: dts: qcom-msm8974-castor: Use &labels
ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs
ARM: dts: qcom-msm8974-klte: Use &labels
...
Link: https://lore.kernel.org/r/20220509172125.313259-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fairphone 2 always uses Snapdragon 801, a.k.a msm8974pro so change the
include and filename to that.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421211936.345168-1-luca@z3ntu.xyz
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add the 'pro' part to the filenames of DTs of devices that are based on
this SoC to make in easier to differentiate between Snapdragon 800- and
801-based platforms.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-16-konrad.dybcio@somainline.org
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
SONY phones/tables are based on a common board ('platform'). Devices
based on the same are often close to identical. Mention their association
in filenames, like it's done in arm64 DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-2-konrad.dybcio@somainline.org
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for this smartwatch, based on Snapdragon 400 SoC.
Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Vibration motor
* Bluetooth
* Wifi
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226101939.1011551-2-luca@z3ntu.xyz
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.19, please pull the following:
- Oleksij fixes the ethernet node name for the USB Ethernet adapter on
BCM283x (Raspberry Pi 1/2/3) platforms
- Kuldeep fixes the PL022 SPI controller clock names to conform to the
binding
- Rafal updates the various BCM5301X (Northstar) Device Tree include
files to be dtsschema conforming for pinctrl, NAND
- Arinc adds the Asus RT-AC88U binding, removes some unnecessary
properties of the Ethernet switch DT node, populates the correct PHY
interface for port 5 of the switch, adds support for fetching the MAC
address from the NVMEM provider and finally disables gmac0 on that
device which is unused
- Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio
line names conforming to the printed circuit board layout
- Krzysztof updates various Broadcom DTS files to have a conforming SPI
nor Device Tree node
- Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2
wireless routers based on the BCM4708 SoC
- William adds support for the BCM47622 ARMv7 Broadband SoC and provides
a basic DTS to boot upstream Linux on such a system
* tag 'arm-soc/for-5.19/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
ARM: dts: add dts files for bcmbca soc 47622
dt-bindings: arm: add bcmbca device tree binding document
ARM: dts: bcm283x: Align ETH_CLK GPIO line name
ARM: dts: bcm283x: Remove gpio line name NC
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U
ARM: dts: broadcom: align SPI NOR node name with dtschema
dt-bindings: arm: bcm: add bindings for Asus RT-AC88U
ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC
dt-bindings: arm: bcm: create new description for BCM53016
dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings
ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U
ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U
ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U
ARM: dts: BCM5301X: Fix DTC warning for NAND node
ARM: dts: BCM5301X: Update pin controller node name
...
Link: https://lore.kernel.org/r/20220504210942.1838248-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with
- BCM4708A0
- 128MiB NAND flash
- 2T2R 11ac/a/b/g/n Wi-Fi
- 4x 10/100/1000M ethernet switch
- 1x USB 3.0 port
WZR-1166DHP and WZR-1166DHP2 have different memory capacity.
WZR-1166DHP
- 512 MiB DDR2 SDRAM
WZR-1166DHP2
- 256 MiB DDR2 SDRAM
These hardware components are very similar to the WZR-1750DHP
except for the number of antennas.
Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| | |
Add dts for ARMv7 based broadband SoC BCM47622. bcm47622.dtsi is the
SoC description dts header and bcm947622.dts is a simple dts file for
Broadcom BCM947622 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:
-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication.
- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds a device tree for "Codina TMO" also known as
Samsung Galaxy Exhibit or Samsung SGH-T599. It is quite different
from the vanilla Codina despite sharing the same board file in
the vendor tree.
Fix up some comments in the Codina DTS while we're at it.
Cc: phone-devel@vger.kernel.org
Cc: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220222233313.1774416-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.18, please pull the following:
- Arinc defines the switch ports of the RTL8365MB switch on the Asus
RT-AC88U
- Richard provides cache information for the BCM2835/36/37 and BCM2711
SoCs such that tools like "lscpu -C" can report it when supported
- Stefan adds support for the Raspberry Pi Zero 2 W (wireless)
- Matthew defines the MAC address NVMEM cells for the Cisco Meraki
MX64/MX65 devices, he also fixes the LED for these platforms.
- Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150
* tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul XWR-3150
ARM: dts: NSP: MX6X: correct LED function types
ARM: dts: NSP: MX6X: get mac-address from eeprom
arm64: dts: broadcom: Add reference to RPi Zero 2 W
ARM: dts: Add Raspberry Pi Zero 2 W
dt-bindings: arm: bcm2835: Add Raspberry Pi Zero 2 W
ARM: dts: bcm2835/6: Add the missing L1/L2 cache information
ARM: dts: bcm2711: Add the missing L1/L2 cache information
ARM: dts: bcm2837: Add the missing L1/L2 cache information
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
Link: https://lore.kernel.org/r/20220307194817.3754107-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The Raspberry Pi Zero 2 W mostly bases on the Raspberry Pi Zero W with
the following differences:
* Broadcom BCM2710A1, quad-core 64-bit SoC @ 1 GHz
* Synaptics BCM43436 (reported as BCM43430B0) IEEE 802.11b/g/n wireless LAN
Contrary to the Raspberry Pi 3 boards there is no GPIO expander.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.18 (part 1)
Add new 2 bays NAS:
- Ctera C200 V1 (kirkwood based)
- Ctera C200 V2 (armada-370 based)
Add support for PCIe legacy INTx interrupts on Armada 385
Add PCIe proprty to limit the power on miniPCIe slots in Turris Omnia
* tag 'mvebu-dt-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: Set PCIe slot-power-limit-milliwatt properties
ARM: dts: mvebu: Add Ctera C-200 V2 board
ARM: dts: kirkwood: Add Ctera C-200 V1 board
dt-bindings: vendor-prefixes: Add Ctera Networks
ARM: dts: armada-385.dtsi: Add definitions for PCIe legacy INTx interrupts
Link: https://lore.kernel.org/r/87pmn5zrd0.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Ctera C200 V2 is armada-370 based 2-Bay NAS.
Hardware:
- SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
- Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
- NAND Flash: 256MB (ESMT F59L2G81A-25T)
- Lan: 1x GBE (Marvell 88E1318-NNB2)
- Storage: 2x SATA HDD 3.5" Slot
- USB: 2x USB 3.0 port (Renesas uPD720202)
- Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
- LEDs: 13x GPIO controlled
- Buttons: 2x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Ctera C200 V1 is kirkwood-based 2-Bay NAS.
Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
- Lan: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: 2x SATA HDD 3.5" Slot
- USB: 2x USB 2.0 port
- Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
- LEDs: 13x GPIO controlled
- Buttons: 2x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
- add initial support for mt6582 and Prestigio PMT5008 3G tablet
- add basic support for Airoha EN7523
* tag 'v5.17-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: dts: add GPIO support for Airoha EN7523
ARM: Add basic support for Airoha EN7523 SoC
dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
dt-bindings: Add vendor prefix for Airoha
dt-bindings: mediatek: Adds a DT binding documentation for the MT6582 SoC
ARM: dts: Add initial support for Prestigio PMT5008 3G tablet
ARM: dts: Add initial support for Mediatek mt6582
Link: https://lore.kernel.org/r/3974dc7e-4185-4d88-ab5b-031a7d24214d@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.
Add basic support for Airoha EN7523, enough for booting to console.
The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-4-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.18
- New machines
* Quanta S6Q AST2600 BMC
* ASRock ROMED8HM3 AST2500 BMC, a half-width, single-socket Epyc
server board
- Facebook's Bletchley has a large update for production hardware
- Ampere's Mt Jade has a number of updates
- Small clenaups and additions for Everest, Rainier and Tacoma, and the
flash layout
* tag 'aspeed-5.18-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (27 commits)
ARM: dts: aspeed: p10bmc: Enable ftrace in ramoops buffer
ARM: dts: aspeed: everest: Add RTC battery gpio name
ARM: dts: aspeed: rainer: Add RTC battery gpio name
ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC
ARM: dts: aspeed: rainier: Remove SPI NOR controllers
ARM: dts: aspeed: mtjade: Move all adc sensors into iio-hwmon node
ARM: dts: aspeed: mtjade: Rename GPIO hog nodes to match schema.
ARM: dts: aspeed: mtjade: Update host0-ready pin
ARM: dts: aspeed: mtjade: Update rtc-battery-voltage-read-enable pin
ARM: dts: aspeed: mtjade: Enable secondary flash
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
ARM: dts: aspeed: rainier: Label reset-cause-pinhole GPIO
ARM: dts: aspeed: everest: Label reset-cause-pinhole GPIO
ARM: dts: aspeed: tacoma: Clean up KCS nodes
ARM: dts: aspeed: Add device tree for Quanta S6Q BMC
ARM: dts: aspeed: bletchley: Cleanup redundant nodes
ARM: dts: aspeed: bletchley: Enable mdio3 bus
ARM: dts: aspeed: bletchley: Add INA230 sensor on each sled
ARM: dts: aspeed: bletchley: Add shunt-resistor for ADM1278
ARM: dts: aspeed: bletchley: Add interrupt support for sled io expander
...
Link: https://lore.kernel.org/r/CACPK8XdUXy5cnEDKmNirtByNMBGCjXwZpdKqJ0ytc0f34vzbBA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This is a half-width, single-socket Epyc server board with an AST2500
BMC. This device tree is sufficient for basic OpenBMC functionality,
but we'll need to add a few more devices (as driver support becomes
available) before it's fully usable.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220105101719.7093-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The Quanta S6Q is a server platform with AST2600 BMC SoC
Signed-off-by: George Hung <george.hung@quantatw.com>
Reviewed-by: Alan Kuo <Alan_Kuo@quantatw.com>
Reviewed-by: P.K. Lee <p.k.lee@quantatw.com>
Link: https://lore.kernel.org/r/20220217031355.46102-1-george.hung@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.18, round 1
Highlights:
----------
-MCU:
-Fix W=1 warnings for timers (duplicate unit-address) for F4 and F7 series.
-Enable DMA2D on f469 disco.
- MPU:
-General:
- Add new board support: emSBS-Argon.
- Add dma configuration for all U(S)ART nodes and disable them in board files
when they are not needed in stm32mp15.
- Correct GIC PPI interrupts on stm32mp15 and stm32mp13.
- ST boards:
- Add EXTI support on stm32mp13
- Add DMA, MDMA and DMAmux support to stm32mp13 (iso feature than MP15)
- Update SDMMC1/2 support on stm32mp13: sleep config, update version to v2.2,
update the max frequency to 130 MHz.
- DH boards:
- Enable rproc to control the CM4 and IPCC mailbox to interact with it.
* tag 'stm32-dt-for-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (43 commits)
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp13
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
ARM: dts: stm32: remove some timer duplicate unit-address on stm32f7 series
ARM: dts: stm32: Enable EXTI on stm32mp13
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcor-avenger96
ARM: dts: stm32: keep uart4 behavior on stm32mp15xx-dhcom-som
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-picoitx
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-pdk2
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-drc02
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-odyssey
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-lxa-mc1
ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0-of7
ARM: dts: stm32: keep uart4 behavior on stm32mp157a-iot-box
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-edimm2.2
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-ctouch2
ARM: dts: stm32: keep uart4 and uart7 behavior on stm32mp15xx-dkx
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-ed1
...
Link: https://lore.kernel.org/r/893924a9-bcc4-9fa9-4f8e-7f56e77f6854@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch presents the DT patches for the emtrion GmbH
Argon board series. They are available with STM32MP157
from STMicroelectronics with 512 MByte Memory.
The devicetree stm32mp157c-emstamp-argon.dtsi is the common part
providing the module components and the basic support for the SoC.
The support for the emSBC-Argon baseboard in the developer-kit
configuration is provided by the stm32mp157c-emsbc-argon.dts file.
Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 & LAN966 DT #1 for 5.18:
- lan966x basic DT and associated evaluation board pcb8291 (2-ports)
- documentation for an upcoming Kontron switch board featuring a LAN9668
- one fix for an old bug we have with PMECC on sama5d2 in some corner
cases
- sama7g5 and its EK: crypto, CAN and DVFS operating points
* tag 'at91-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: add opps
ARM: dts: at91: sama7g5ek: set regulator voltages for standby state
ARM: dts: at91: fix low limit for CPU regulator
ARM: dts: at91: sama7g5: Enable can0 and can1 support in sama7g5-ek
ARM: dts: at91: sama7g5: Add can controllers of sama7g5
ARM: dts: at91: sama7g5: Add crypto nodes
ARM: dts: at91: Use the generic "crypto" node name for the crypto IPs
ARM: dts: at91: remove status = "okay" from soc specific dtsi
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
dt-bindings: arm: at91: add Kontron's new KSwitches
ARM: dts: add DT for lan966 SoC and 2-port board pcb8291
Link: https://lore.kernel.org/r/20220225110735.18080-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch adds basic DT for Microchip lan966x SoC and associated board
pcb8291(2-port EVB). Adds peripherals required to allow booting: Interrupt
Controller, Clock, Generic ARMv7 Timers, Synopsys Timer, Flexcoms, GPIOs.
Also adds other peripherals like crypto(AES/SHA), DMA, Watchdog Timer, TRNG
and MCAN0.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220221080858.14233-1-kavyasree.kotagiri@microchip.com
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Usual round of DT patches for the 5.18 merge window, with:
- DT fixes
- ethernet0 alias for Nanopi NEO
- r_uart node for H3/H5
- eMMC and bluetooth nodes for Nanopi NEO air
- updated maintainers for Allwinner SoCs
- new board: A20-Marsboard
* tag 'sunxi-dt-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
MAINTAINERS: Update Allwinner SoCs maintainers
ARM: dts: sun8i-h3: Drop args in 'thermal-sensors'
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order
ARM: dts: sun8i: Add ethernet0 alias in Nanopi NEO's device tree
dt-bindings: arm: sunxi: add haoyu,a20-marsboard
ARM: dts: sun7i: Add A20-Marsboard
ARM: dts: sunxi: h3/h5: add r_uart node
ARM: dts: nanopi-neo-air: Add eMMC and bluetooth
Link: https://lore.kernel.org/r/YhgMJ0AqaHopzaW3@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
