summaryrefslogtreecommitdiffstats
path: root/arch/arm64/kvm
Commit message (Collapse)AuthorAgeFilesLines
* KVM: arm64: Prevent kmemleak from accessing pKVM memoryQuentin Perret2022-06-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a7259df76702 ("memblock: make memblock_find_in_range method private") changed the API using which memory is reserved for the pKVM hypervisor. However, memblock_phys_alloc() differs from the original API in terms of kmemleak semantics -- the old one didn't report the reserved regions to kmemleak while the new one does. Unfortunately, when protected KVM is enabled, all kernel accesses to pKVM-private memory result in a fatal exception, which can now happen because of kmemleak scans: $ echo scan > /sys/kernel/debug/kmemleak [ 34.991354] kvm [304]: nVHE hyp BUG at: [<ffff800008fa3750>] __kvm_nvhe_handle_host_mem_abort+0x270/0x290! [ 34.991580] kvm [304]: Hyp Offset: 0xfffe8be807e00000 [ 34.991813] Kernel panic - not syncing: HYP panic: [ 34.991813] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800 [ 34.991813] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000 [ 34.991813] VCPU:0000000000000000 [ 34.993660] CPU: 0 PID: 304 Comm: bash Not tainted 5.19.0-rc2 #102 [ 34.994059] Hardware name: linux,dummy-virt (DT) [ 34.994452] Call trace: [ 34.994641] dump_backtrace.part.0+0xcc/0xe0 [ 34.994932] show_stack+0x18/0x6c [ 34.995094] dump_stack_lvl+0x68/0x84 [ 34.995276] dump_stack+0x18/0x34 [ 34.995484] panic+0x16c/0x354 [ 34.995673] __hyp_pgtable_total_pages+0x0/0x60 [ 34.995933] scan_block+0x74/0x12c [ 34.996129] scan_gray_list+0xd8/0x19c [ 34.996332] kmemleak_scan+0x2c8/0x580 [ 34.996535] kmemleak_write+0x340/0x4a0 [ 34.996744] full_proxy_write+0x60/0xbc [ 34.996967] vfs_write+0xc4/0x2b0 [ 34.997136] ksys_write+0x68/0xf4 [ 34.997311] __arm64_sys_write+0x20/0x2c [ 34.997532] invoke_syscall+0x48/0x114 [ 34.997779] el0_svc_common.constprop.0+0x44/0xec [ 34.998029] do_el0_svc+0x2c/0xc0 [ 34.998205] el0_svc+0x2c/0x84 [ 34.998421] el0t_64_sync_handler+0xf4/0x100 [ 34.998653] el0t_64_sync+0x18c/0x190 [ 34.999252] SMP: stopping secondary CPUs [ 35.000034] Kernel Offset: disabled [ 35.000261] CPU features: 0x800,00007831,00001086 [ 35.000642] Memory Limit: none [ 35.001329] ---[ end Kernel panic - not syncing: HYP panic: [ 35.001329] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800 [ 35.001329] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000 [ 35.001329] VCPU:0000000000000000 ]--- Fix this by explicitly excluding the hypervisor's memory pool from kmemleak like we already do for the hyp BSS. Cc: Mike Rapoport <rppt@kernel.org> Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Signed-off-by: Quentin Perret <qperret@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220616161135.3997786-1-qperret@google.com
* KVM: arm64: Remove redundant hyp_assert_lock_held() assertionsWill Deacon2022-06-091-4/+0
| | | | | | | | | host_stage2_try() asserts that the KVM host lock is held, so there's no need to duplicate the assertion in its wrappers. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220609121223.2551-6-will@kernel.org
* KVM: arm64: Ignore 'kvm-arm.mode=protected' when using VHEWill Deacon2022-06-091-1/+5
| | | | | | | | | | | Ignore 'kvm-arm.mode=protected' when using VHE so that kvm_get_mode() only returns KVM_MODE_PROTECTED on systems where the feature is available. Cc: David Brazdil <dbrazdil@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220609121223.2551-4-will@kernel.org
* KVM: arm64: Handle all ID registers trapped for a protected VMMarc Zyngier2022-06-091-8/+34
| | | | | | | | | | | | | A protected VM accessing ID_AA64ISAR2_EL1 gets punished with an UNDEF, while it really should only get a zero back if the register is not handled by the hypervisor emulation (as mandated by the architecture). Introduce all the missing ID registers (including the unallocated ones), and have them to return 0. Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220609121223.2551-3-will@kernel.org
* KVM: arm64: Return error from kvm_arch_init_vm() on allocation failureWill Deacon2022-06-091-1/+3
| | | | | | | | | | | If we fail to allocate the 'supported_cpus' cpumask in kvm_arch_init_vm() then be sure to return -ENOMEM instead of success (0) on the failure path. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220609121223.2551-2-will@kernel.org
* KVM: arm64: Warn if accessing timer pending state outside of vcpu contextMarc Zyngier2022-06-081-0/+3
| | | | | | | | | | | | | | | | A recurrent bug in the KVM/arm64 code base consists in trying to access the timer pending state outside of the vcpu context, which makes zero sense (the pending state only exists when the vcpu is loaded). In order to avoid more embarassing crashes and catch the offenders red-handed, add a warning to kvm_arch_timer_get_input_level() and return the state as non-pending. This avoids taking the system down, and still helps tracking down silly bugs. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220607131427.1164881-4-maz@kernel.org
* KVM: arm64: Replace vgic_v3_uaccess_read_pending with vgic_uaccess_read_pendingMarc Zyngier2022-06-082-39/+22
| | | | | | | | | | | | | | | Now that GICv2 has a proper userspace accessor for the pending state, switch GICv3 over to it, dropping the local version, moving over the specific behaviours that CGIv3 requires (such as the distinction between pending latch and line level which were never enforced with GICv2). We also gain extra locking that isn't really necessary for userspace, but that's a small price to pay for getting rid of superfluous code. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20220607131427.1164881-3-maz@kernel.org
* KVM: arm64: Don't read a HW interrupt pending state in user contextMarc Zyngier2022-06-073-5/+21
| | | | | | | | | | | | | | | | | | | | | | | Since 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW"), we're able to source the pending bit for an interrupt that is stored either on the physical distributor or on a device. However, this state is only available when the vcpu is loaded, and is not intended to be accessed from userspace. Unfortunately, the GICv2 emulation doesn't provide specific userspace accessors, and we fallback with the ones that are intended for the guest, with fatal consequences. Add a new vgic_uaccess_read_pending() accessor for userspace to use, build on top of the existing vgic_mmio_read_pending(). Reported-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW") Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org Cc: stable@vger.kernel.org
* KVM: arm64: Fix inconsistent indentingsunliming2022-06-071-1/+1
| | | | | | | | | | | Fix the following smatch warnings: arch/arm64/kvm/vmid.c:62 flush_context() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220602024805.511457-1-sunliming@kylinos.cn
* KVM: arm64: Always start with clearing SME flag on loadMarc Zyngier2022-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | On each vcpu load, we set the KVM_ARM64_HOST_SME_ENABLED flag if SME is enabled for EL0 on the host. This is used to restore the correct state on vpcu put. However, it appears that nothing ever clears this flag. Once set, it will stick until the vcpu is destroyed, which has the potential to spuriously enable SME for userspace. As it turns out, this is due to the SME code being more or less copied from SVE, and inheriting the same shortcomings. We never saw the issue because nothing uses SME, and the amount of testing is probably still pretty low. Fixes: 861262ab8627 ("KVM: arm64: Handle SME host state when running guests") Signed-off-by: Marc Zyngier <maz@kernel.org> Reviwed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220528113829.1043361-3-maz@kernel.org
* KVM: arm64: Always start with clearing SVE flag on loadMarc Zyngier2022-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | On each vcpu load, we set the KVM_ARM64_HOST_SVE_ENABLED flag if SVE is enabled for EL0 on the host. This is used to restore the correct state on vpcu put. However, it appears that nothing ever clears this flag. Once set, it will stick until the vcpu is destroyed, which has the potential to spuriously enable SVE for userspace. We probably never saw the issue because no VMM uses SVE, but that's still pretty bad. Unconditionally clearing the flag on vcpu load addresses the issue. Fixes: 8383741ab2e7 ("KVM: arm64: Get rid of host SVE tracking/saving") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220528113829.1043361-2-maz@kernel.org
* Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2022-05-2625-524/+1294
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull kvm updates from Paolo Bonzini: "S390: - ultravisor communication device driver - fix TEID on terminating storage key ops RISC-V: - Added Sv57x4 support for G-stage page table - Added range based local HFENCE functions - Added remote HFENCE functions based on VCPU requests - Added ISA extension registers in ONE_REG interface - Updated KVM RISC-V maintainers entry to cover selftests support ARM: - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes x86: - New ioctls to get/set TSC frequency for a whole VM - Allow userspace to opt out of hypercall patching - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr AMD SEV improvements: - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES - V_TSC_AUX support Nested virtualization improvements for AMD: - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) - Allow AVIC to co-exist with a nested guest running - Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support - PAUSE filtering for nested hypervisors Guest support: - Decoupling of vcpu_is_preempted from PV spinlocks" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits) KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest KVM: selftests: x86: Sync the new name of the test case to .gitignore Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND x86, kvm: use correct GFP flags for preemption disabled KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer x86/kvm: Alloc dummy async #PF token outside of raw spinlock KVM: x86: avoid calling x86 emulator without a decoded instruction KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) s390/uv_uapi: depend on CONFIG_S390 KVM: selftests: x86: Fix test failure on arch lbr capable platforms KVM: LAPIC: Trace LAPIC timer expiration on every vmentry KVM: s390: selftest: Test suppression indication on key prot exception KVM: s390: Don't indicate suppression on dirtying, failing memop selftests: drivers/s390x: Add uvdevice tests drivers/s390/char: Add Ultravisor io device MAINTAINERS: Update KVM RISC-V entry to cover selftests support RISC-V: KVM: Introduce ISA extension register RISC-V: KVM: Cleanup stale TLB entries when host CPU changes RISC-V: KVM: Add remote HFENCE functions based on VCPU requests ...
| * Merge tag 'kvmarm-5.19' of ↵Paolo Bonzini2022-05-2528-531/+1456
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 5.19 - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes [Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated from 4 to 6. - Paolo]
| | * Merge branch kvm-arm64/its-save-restore-fixes-5.19 into kvmarm-master/nextMarc Zyngier2022-05-161-18/+78
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kvm-arm64/its-save-restore-fixes-5.19: : . : Tighten the ITS save/restore infrastructure to fail early rather : than late. Patches courtesy of Rocardo Koller. : . KVM: arm64: vgic: Undo work in failed ITS restores KVM: arm64: vgic: Do not ignore vgic_its_restore_cte failures KVM: arm64: vgic: Add more checks when restoring ITS tables KVM: arm64: vgic: Check that new ITEs could be saved in guest memory Signed-off-by: Marc Zyngier <maz@kernel.org>
| | | * KVM: arm64: vgic: Undo work in failed ITS restoresRicardo Koller2022-05-161-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Failed ITS restores should clean up all state restored until the failure. There is some cleanup already present when failing to restore some tables, but it's not complete. Add the missing cleanup. Note that this changes the behavior in case of a failed restore of the device tables. restore ioctl: 1. restore collection tables 2. restore device tables With this commit, failures in 2. clean up everything created so far, including state created by 1. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510001633.552496-5-ricarkol@google.com
| | | * KVM: arm64: vgic: Do not ignore vgic_its_restore_cte failuresRicardo Koller2022-05-161-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restoring a corrupted collection entry (like an out of range ID) is being ignored and treated as success. More specifically, a vgic_its_restore_cte failure is treated as success by vgic_its_restore_collection_table. vgic_its_restore_cte uses positive and negative numbers to return error, and +1 to return success. The caller then uses "ret > 0" to check for success. Fix this by having vgic_its_restore_cte only return negative numbers on error. Do this by changing alloc_collection return codes to only return negative numbers on error. Signed-off-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510001633.552496-4-ricarkol@google.com
| | | * KVM: arm64: vgic: Add more checks when restoring ITS tablesRicardo Koller2022-05-161-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Try to improve the predictability of ITS save/restores (and debuggability of failed ITS saves) by failing early on restore when trying to read corrupted tables. Restoring the ITS tables does some checks for corrupted tables, but not as many as in a save: an overflowing device ID will be detected on save but not on restore. The consequence is that restoring a corrupted table won't be detected until the next save; including the ITS not working as expected after the restore. As an example, if the guest sets tables overlapping each other, which would most likely result in some corrupted table, this is what we would see from the host point of view: guest sets base addresses that overlap each other save ioctl restore ioctl save ioctl (fails) Ideally, we would like the first save to fail, but overlapping tables could actually be intended by the guest. So, let's at least fail on the restore with some checks: like checking that device and event IDs don't overflow their tables. Signed-off-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510001633.552496-3-ricarkol@google.com
| | | * KVM: arm64: vgic: Check that new ITEs could be saved in guest memoryRicardo Koller2022-05-161-12/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Try to improve the predictability of ITS save/restores by failing commands that would lead to failed saves. More specifically, fail any command that adds an entry into an ITS table that is not in guest memory, which would otherwise lead to a failed ITS save ioctl. There are already checks for collection and device entries, but not for ITEs. Add the corresponding check for the ITT when adding ITEs. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Ricardo Koller <ricarkol@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510001633.552496-2-ricarkol@google.com
| | * | Merge branch kvm-arm64/misc-5.19 into kvmarm-master/nextMarc Zyngier2022-05-166-46/+37
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kvm-arm64/misc-5.19: : . : Misc fixes and general improvements for KVMM/arm64: : : - Better handle out of sequence sysregs in the global tables : : - Remove a couple of unnecessary loads from constant pool : : - Drop unnecessary pKVM checks : : - Add all known M1 implementations to the SEIS workaround : : - Cleanup kerneldoc warnings : . KVM: arm64: vgic-v3: List M1 Pro/Max as requiring the SEIS workaround KVM: arm64: pkvm: Don't mask already zeroed FEAT_SVE KVM: arm64: pkvm: Drop unnecessary FP/SIMD trap handler KVM: arm64: nvhe: Eliminate kernel-doc warnings KVM: arm64: Avoid unnecessary absolute addressing via literals KVM: arm64: Print emulated register table name when it is unsorted KVM: arm64: Don't BUG_ON() if emulated register table is unsorted Signed-off-by: Marc Zyngier <maz@kernel.org>
| | | * | KVM: arm64: vgic-v3: List M1 Pro/Max as requiring the SEIS workaroundMarc Zyngier2022-05-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unsusprisingly, Apple M1 Pro/Max have the exact same defect as the original M1 and generate random SErrors in the host when a guest tickles the GICv3 CPU interface the wrong way. Add the part numbers for both the CPU types found in these two new implementations, and add them to the hall of shame. This also applies to the Ultra version, as it is composed of 2 Max SoCs. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220514102524.3188730-1-maz@kernel.org
| | | * | KVM: arm64: pkvm: Don't mask already zeroed FEAT_SVEOliver Upton2022-05-101-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FEAT_SVE is already masked by the fixed configuration for ID_AA64PFR0_EL1; don't try and mask it at runtime. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220509162559.2387784-3-oupton@google.com
| | | * | KVM: arm64: pkvm: Drop unnecessary FP/SIMD trap handlerOliver Upton2022-05-101-18/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pVM-specific FP/SIMD trap handler just calls straight into the generic trap handler. Avoid the indirection and just call the hyp handler directly. Note that the BUILD_BUG_ON() pattern is repeated in pvm_init_traps_aa64pfr0(), which is likely a better home for it. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220509162559.2387784-2-oupton@google.com
| | | * | KVM: arm64: nvhe: Eliminate kernel-doc warningsRandy Dunlap2022-05-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't use begin-kernel-doc notation (/**) for comments that are not in kernel-doc format. This prevents these kernel-doc warnings: arch/arm64/kvm/hyp/nvhe/switch.c:126: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Disable host events, enable guest events arch/arm64/kvm/hyp/nvhe/switch.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Disable guest events, enable host events arch/arm64/kvm/hyp/nvhe/switch.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Handler for protected VM restricted exceptions. arch/arm64/kvm/hyp/nvhe/switch.c:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Handler for protected VM MSR, MRS or System instruction execution in AArch64. arch/arm64/kvm/hyp/nvhe/switch.c:196: warning: Function parameter or member 'vcpu' not described in 'kvm_handle_pvm_fpsimd' arch/arm64/kvm/hyp/nvhe/switch.c:196: warning: Function parameter or member 'exit_code' not described in 'kvm_handle_pvm_fpsimd' arch/arm64/kvm/hyp/nvhe/switch.c:196: warning: expecting prototype for Handler for protected floating(). Prototype was for kvm_handle_pvm_fpsimd() instead Fixes: 09cf57eba304 ("KVM: arm64: Split hyp/switch.c to VHE/nVHE") Fixes: 1423afcb4117 ("KVM: arm64: Trap access to pVM restricted features") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: David Brazdil <dbrazdil@google.com> Cc: James Morse <james.morse@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: kvmarm@lists.cs.columbia.edu Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220430050123.2844-1-rdunlap@infradead.org
| | | * | KVM: arm64: Avoid unnecessary absolute addressing via literalsArd Biesheuvel2022-05-061-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a few cases in the nVHE code where we take the absolute address of a symbol via a literal pool entry, and subsequently translate it to another address space (PA, kimg VA, kernel linear VA, etc). Originally, this literal was needed because we relied on a different translation for absolute references, but this is no longer the case, so we can simply use relative addressing instead. This removes a couple of RELA entries pointing into the .text segment. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220428140350.3303481-1-ardb@kernel.org
| | | * | KVM: arm64: Print emulated register table name when it is unsortedAlexandru Elisei2022-05-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a sysreg table entry is out-of-order, KVM attempts to print the address of the table: [ 0.143911] kvm [1]: sys_reg table (____ptrval____) out of order (1) Printing the name of the table instead of a pointer is more helpful in this case. The message has also been slightly tweaked to be point out the offending entry (and to match the missing reset error message): [ 0.143891] kvm [1]: sys_reg table sys_reg_descs+0x50/0x7490 entry 1 out of order Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220428103405.70884-3-alexandru.elisei@arm.com
| | | * | KVM: arm64: Don't BUG_ON() if emulated register table is unsortedAlexandru Elisei2022-05-042-16/+25
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To emulate a register access, KVM uses a table of registers sorted by register encoding to speed up queries using binary search. When Linux boots, KVM checks that the table is sorted and uses a BUG_ON() statement to let the user know if it's not. The unfortunate side effect is that an unsorted sysreg table brings down the whole kernel, not just KVM, even though the rest of the kernel can function just fine without KVM. To make matters worse, on machines which lack a serial console, the user is left pondering why the machine is taking so long to boot. Improve this situation by returning an error from kvm_arch_init() if the sysreg tables are not in the correct order. The machine is still very much usable for the user, with the exception of virtualization, who can now easily determine what went wrong. A minor typo has also been corrected in the check_sysreg_table() function. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220428103405.70884-2-alexandru.elisei@arm.com
| | * | Merge branch kvm-arm64/per-vcpu-host-pmu-data into kvmarm-master/nextMarc Zyngier2022-05-165-35/+39
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kvm-arm64/per-vcpu-host-pmu-data: : . : Pass the host PMU state in the vcpu to avoid the use of additional : shared memory between EL1 and EL2 (this obviously only applies : to nVHE and Protected setups). : : Patches courtesy of Fuad Tabba. : . KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected KVM: arm64: Reenable pmu in Protected Mode KVM: arm64: Pass pmu events to hyp via vcpu KVM: arm64: Repack struct kvm_pmu to reduce size KVM: arm64: Wrapper for getting pmu_events Signed-off-by: Marc Zyngier <maz@kernel.org>
| | | * | KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selectedMarc Zyngier2022-05-163-15/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moving kvm_pmu_events into the vcpu (and refering to it) broke the somewhat unusual case where the kernel has no support for a PMU at all. In order to solve this, move things around a bit so that we can easily avoid refering to the pmu structure outside of PMU-aware code. As a bonus, pmu.c isn't compiled in when HW_PERF_EVENTS isn't selected. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/202205161814.KQHpOzsJ-lkp@intel.com
| | | * | KVM: arm64: Reenable pmu in Protected ModeFuad Tabba2022-05-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the pmu code does not access hyp data, reenable it in protected mode. Once fully supported, protected VMs will not have pmu support, since that could leak information. However, non-protected VMs in protected mode should have pmu support if available. Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510095710.148178-5-tabba@google.com
| | | * | KVM: arm64: Pass pmu events to hyp via vcpuFuad Tabba2022-05-153-22/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of the host accessing hyp data directly, pass the pmu events of the current cpu to hyp via the vcpu. This adds 64 bits (in two fields) to the vcpu that need to be synced before every vcpu run in nvhe and protected modes. However, it isolates the hypervisor from the host, which allows us to use pmu in protected mode in a subsequent patch. No visible side effects in behavior intended. Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510095710.148178-4-tabba@google.com
| | | * | KVM: arm64: Wrapper for getting pmu_eventsFuad Tabba2022-05-151-16/+26
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eases migrating away from using hyp data and simplifies the code. No functional change intended. Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220510095710.148178-2-tabba@google.com
| | * | Merge branch kvm-arm64/vgic-invlpir into kvmarm-master/nextMarc Zyngier2022-05-165-37/+187
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kvm-arm64/vgic-invlpir: : . : Implement MMIO-based LPI invalidation for vGICv3. : . KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidation KVM: arm64: vgic-v3: Expose GICR_CTLR.RWP when disabling LPIs irqchip/gic-v3: Exposes bit values for GICR_CTLR.{IR, CES} Signed-off-by: Marc Zyngier <maz@kernel.org>
| | | * | KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revisionMarc Zyngier2022-05-044-6/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since adversising GICR_CTLR.{IC,CES} is directly observable from a guest, we need to make it selectable from userspace. For that, bump the default GICD_IIDR revision and let userspace downgrade it to the previous default. For GICv2, the two distributor revisions are strictly equivalent. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220405182327.205520-5-maz@kernel.org
| | | * | KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidationMarc Zyngier2022-05-043-21/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since GICv4.1, it has become legal for an implementation to advertise GICR_{INVLPIR,INVALLR,SYNCR} while having an ITS, allowing for a more efficient invalidation scheme (no guest command queue contention when multiple CPUs are generating invalidations). Provide the invalidation registers as a primitive to their ITS counterpart. Note that we don't advertise them to the guest yet (the architecture allows an implementation to do this). Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Oliver Upton <oupton@google.com> Link: https://lore.kernel.org/r/20220405182327.205520-4-maz@kernel.org
| | | * | KVM: arm64: vgic-v3: Expose GICR_CTLR.RWP when disabling LPIsMarc Zyngier2022-05-043-10/+29
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When disabling LPIs, a guest needs to poll GICR_CTLR.RWP in order to be sure that the write has taken effect. We so far reported it as 0, as we didn't advertise that LPIs could be turned off the first place. Start tracking this state during which LPIs are being disabled, and expose the 'in progress' state via the RWP bit. We also take this opportunity to disallow enabling LPIs and programming GICR_{PEND,PROP}BASER while LPI disabling is in progress, as allowed by the architecture (UNPRED behaviour). We don't advertise the feature to the guest yet (which is allowed by the architecture). Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220405182327.205520-3-maz@kernel.org
| | * | Merge branch kvm-arm64/psci-suspend into kvmarm-master/nextMarc Zyngier2022-05-162-40/+129
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kvm-arm64/psci-suspend: : . : Add support for PSCI SYSTEM_SUSPEND and allow userspace to : filter the wake-up events. : : Patches courtesy of Oliver. : . Documentation: KVM: Fix title level for PSCI_SUSPEND selftests: KVM: Test SYSTEM_SUSPEND PSCI call selftests: KVM: Refactor psci_test to make it amenable to new tests selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test KVM: arm64: Implement PSCI SYSTEM_SUSPEND KVM: arm64: Add support for userspace to suspend a vCPU KVM: arm64: Return a value from check_vcpu_requests() KVM: arm64: Rename the KVM_REQ_SLEEP handler KVM: arm64: Track vCPU power state using MP state values KVM: arm64: Dedupe vCPU power off helpers KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2 Signed-off-by: Marc Zyngier <maz@kernel.org>
| | | * | KVM: arm64: Implement PSCI SYSTEM_SUSPENDOliver Upton2022-05-042-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND" describes a PSCI call that allows software to request that a system be placed in the deepest possible low-power state. Effectively, software can use this to suspend itself to RAM. Unfortunately, there really is no good way to implement a system-wide PSCI call in KVM. Any precondition checks done in the kernel will need to be repeated by userspace since there is no good way to protect a critical section that spans an exit to userspace. SYSTEM_RESET and SYSTEM_OFF are equally plagued by this issue, although no users have seemingly cared for the relatively long time these calls have been supported. The solution is to just make the whole implementation userspace's problem. Introduce a new system event, KVM_SYSTEM_EVENT_SUSPEND, that indicates to userspace a calling vCPU has invoked PSCI SYSTEM_SUSPEND. Additionally, add a CAP to get buy-in from userspace for this new exit type. Only advertise the SYSTEM_SUSPEND PSCI call if userspace has opted in. If a vCPU calls SYSTEM_SUSPEND, punt straight to userspace. Provide explicit documentation of userspace's responsibilites for the exit and point to the PSCI specification to describe the actual PSCI call. Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220504032446.4133305-8-oupton@google.com
| | | * | KVM: arm64: Add support for userspace to suspend a vCPUOliver Upton2022-05-041-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new MP state, KVM_MP_STATE_SUSPENDED, which indicates a vCPU is in a suspended state. In the suspended state the vCPU will block until a wakeup event (pending interrupt) is recognized. Add a new system event type, KVM_SYSTEM_EVENT_WAKEUP, to indicate to userspace that KVM has recognized one such wakeup event. It is the responsibility of userspace to then make the vCPU runnable, or leave it suspended until the next wakeup event. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220504032446.4133305-7-oupton@google.com
| | | * | KVM: arm64: Return a value from check_vcpu_requests()Oliver Upton2022-05-041-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A subsequent change to KVM will introduce a vCPU request that could result in an exit to userspace. Change check_vcpu_requests() to return a value and document the function. Unconditionally return 1 for now. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220504032446.4133305-6-oupton@google.com
| | | * | KVM: arm64: Rename the KVM_REQ_SLEEP handlerOliver Upton2022-05-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The naming of the kvm_req_sleep function is confusing: the function itself sleeps the vCPU, it does not request such an event. Rename the function to make its purpose more clear. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220504032446.4133305-5-oupton@google.com
| | | * | KVM: arm64: Track vCPU power state using MP state valuesOliver Upton2022-05-042-16/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A subsequent change to KVM will add support for additional power states. Store the MP state by value rather than keeping track of it as a boolean. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220504032446.4133305-4-oupton@google.com
| | | * | KVM: arm64: Dedupe vCPU power off helpersOliver Upton2022-05-042-12/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vcpu_power_off() and kvm_psci_vcpu_off() are equivalent; rename the former and replace all callsites to the latter. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220504032446.4133305-3-oupton@google.com
| | | * | KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2Oliver Upton2022-05-041-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Depending on a fallthrough to the default case for hiding SYSTEM_RESET2 requires that any new case statements clean up the failure path for this PSCI call. Unhitch SYSTEM_RESET2 from the default case by setting val to PSCI_RET_NOT_SUPPORTED outside of the switch statement. Apply the cleanup to both the PSCI_1_1_FN_SYSTEM_RESET2 and PSCI_1_0_FN_PSCI_FEATURES handlers. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220504032446.4133305-2-oupton@google.com
| | * | | Merge branch kvm-arm64/hcall-selection into kvmarm-master/nextMarc Zyngier2022-05-164-189/+332
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kvm-arm64/hcall-selection: : . : Introduce a new set of virtual sysregs for userspace to : select the hypercalls it wants to see exposed to the guest. : : Patches courtesy of Raghavendra and Oliver. : . KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace Documentation: Fix index.rst after psci.rst renaming selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list selftests: KVM: aarch64: Introduce hypercall ABI test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test tools: Import ARM SMCCC definitions Docs: KVM: Add doc for the bitmap firmware registers Docs: KVM: Rename psci.rst to hypercalls.rst KVM: arm64: Add vendor hypervisor firmware register KVM: arm64: Add standard hypervisor firmware register KVM: arm64: Setup a framework for hypercall bitmap firmware registers KVM: arm64: Factor out firmware register handling from psci.c Signed-off-by: Marc Zyngier <maz@kernel.org>
| | | * | | KVM: arm64: Fix hypercall bitmap writeback when vcpus have already runMarc Zyngier2022-05-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We generally want to disallow hypercall bitmaps being changed once vcpus have already run. But we must allow the write if the written value is unchanged so that userspace can rewrite the register file on reboot, for example. Without this, a QEMU-based VM will fail to reboot correctly. The original code was correct, and it is me that introduced the regression. Fixes: 05714cab7d63 ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers") Signed-off-by: Marc Zyngier <maz@kernel.org>
| | | * | | KVM: arm64: Add vendor hypervisor firmware registerRaghavendra Rao Ananta2022-05-031-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the firmware register to hold the vendor specific hypervisor service calls (owner value 6) as a bitmap. The bitmap represents the features that'll be enabled for the guest, as configured by the user-space. Currently, this includes support for KVM-vendor features along with reading the UID, represented by bit-0, and Precision Time Protocol (PTP), represented by bit-1. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: tidy-up bitmap values] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-5-rananta@google.com
| | | * | | KVM: arm64: Add standard hypervisor firmware registerRaghavendra Rao Ananta2022-05-031-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the firmware register to hold the standard hypervisor service calls (owner value 5) as a bitmap. The bitmap represents the features that'll be enabled for the guest, as configured by the user-space. Currently, this includes support only for Paravirtualized time, represented by bit-0. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: tidy-up bitmap values] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-4-rananta@google.com
| | | * | | KVM: arm64: Setup a framework for hypercall bitmap firmware registersRaghavendra Rao Ananta2022-05-033-2/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KVM regularly introduces new hypercall services to the guests without any consent from the userspace. This means, the guests can observe hypercall services in and out as they migrate across various host kernel versions. This could be a major problem if the guest discovered a hypercall, started using it, and after getting migrated to an older kernel realizes that it's no longer available. Depending on how the guest handles the change, there's a potential chance that the guest would just panic. As a result, there's a need for the userspace to elect the services that it wishes the guest to discover. It can elect these services based on the kernels spread across its (migration) fleet. To remedy this, extend the existing firmware pseudo-registers, such as KVM_REG_ARM_PSCI_VERSION, but by creating a new COPROC register space for all the hypercall services available. These firmware registers are categorized based on the service call owners, but unlike the existing firmware pseudo-registers, they hold the features supported in the form of a bitmap. During the VM initialization, the registers are set to upper-limit of the features supported by the corresponding registers. It's expected that the VMMs discover the features provided by each register via GET_ONE_REG, and write back the desired values using SET_ONE_REG. KVM allows this modification only until the VM has started. Some of the standard features are not mapped to any bits of the registers. But since they can recreate the original problem of making it available without userspace's consent, they need to be explicitly added to the case-list in kvm_hvc_call_default_allowed(). Any function-id that's not enabled via the bitmap, or not listed in kvm_hvc_call_default_allowed, will be returned as SMCCC_RET_NOT_SUPPORTED to the guest. Older userspace code can simply ignore the feature and the hypercall services will be exposed unconditionally to the guests, thus ensuring backward compatibility. In this patch, the framework adds the register only for ARM's standard secure services (owner value 4). Currently, this includes support only for ARM True Random Number Generator (TRNG) service, with bit-0 of the register representing mandatory features of v1.0. Other services are momentarily added in the upcoming patches. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: reduced the scope of some helpers, tidy-up bitmap max values, dropped error-only fast path] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-3-rananta@google.com
| | | * | | KVM: arm64: Factor out firmware register handling from psci.cRaghavendra Rao Ananta2022-05-033-184/+185
| | | | |/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Common hypercall firmware register handing is currently employed by psci.c. Since the upcoming patches add more of these registers, it's better to move the generic handling to hypercall.c for a cleaner presentation. While we are at it, collect all the firmware registers under fw_reg_ids[] to help implement kvm_arm_get_fw_num_regs() and kvm_arm_copy_fw_reg_indices() in a generic way. Also, define KVM_REG_FEATURE_LEVEL_MASK using a GENMASK instead. No functional change intended. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: fixed KVM_REG_FEATURE_LEVEL_MASK] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-2-rananta@google.com
| | * | | Merge branch kvm-arm64/aarch32-idreg-trap into kvmarm-master/nextMarc Zyngier2022-05-043-61/+208
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kvm-arm64/aarch32-idreg-trap: : . : Add trapping/sanitising infrastructure for AArch32 systen registers, : allowing more control over what we actually expose (such as the PMU). : : Patches courtesy of Oliver and Alexandru. : . KVM: arm64: Fix new instances of 32bit ESRs KVM: arm64: Hide AArch32 PMU registers when not available KVM: arm64: Start trapping ID registers for 32 bit guests KVM: arm64: Plumb cp10 ID traps through the AArch64 sysreg handler KVM: arm64: Wire up CP15 feature registers to their AArch64 equivalents KVM: arm64: Don't write to Rt unless sys_reg emulation succeeds KVM: arm64: Return a bool from emulate_cp() Signed-off-by: Marc Zyngier <maz@kernel.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-10 22:03:22 +0000