summaryrefslogtreecommitdiffstats
path: root/arch/parisc/kernel/smp.c
Commit message (Collapse)AuthorAgeFilesLines
* parisc: Find a new timesync master if current CPU is removedHelge Deller2022-03-291-0/+6
| | | | | | | | When CPU hotplugging is enabled, the user may want to remove the current CPU which is providing the timer ticks. If this happens we need to find a new timesync master. Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: Implement __cpu_die() and __cpu_disable() for CPU hotpluggingHelge Deller2022-03-291-15/+87
| | | | | | | | | | | | | | Add relevant code to __cpu_die() and __cpu_disable() to finally enable the CPU hotplugging features. Reset the irq count values in smp_callin() to zero before bringing up the CPU. It seems that the firmware may need up to 8 seconds to fully stop a CPU in which no other PDC calls are allowed to be made. Use a timeout __cpu_die() to accommodate for this. Use "chcpu -d 1" to bring CPU1 down, and "chcpu -e 1" to bring it up. Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: move CPU field back into thread_infoArd Biesheuvel2021-11-041-2/+0
| | | | | | | | | | | | | | | | | In commit 2214c0e77259 ("parisc: Move thread_info into task struct") PA-RISC gained support for THREAD_INFO_IN_TASK while changes were already underway to keep the CPU field in thread_info rather than move it into task_struct when THREAD_INFO_IN_TASK is enabled. The result is a broken build for all PA-RISC configs that enable SMP. So let's partially revert that commit, and get rid of the ugly hack to get at the offset of task_struct::cpu without having to include linux/sched.h, and put the CPU field back where it was before. Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: bcf9033e5449 ("sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
* parisc/kgdb: add kgdb_roundup() to make kgdb work with idle pollingSven Schnelle2021-11-011-2/+17
| | | | | | | | | | | | | With idle polling, IPIs are not sent when a CPU idle, but queued and run later from do_idle(). The default kgdb_call_nmi_hook() implementation gets the pointer to struct pt_regs from get_irq_reqs(), which doesn't work in that case because it was not called from the IPI interrupt handler. Fix it by defining our own kgdb_roundup() function which sents an IPI_ENTER_KGDB. When that IPI is received on the target CPU kgdb_nmicallback() is called. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: Move thread_info into task structHelge Deller2021-11-011-1/+1
| | | | | | | | | | | | | This implements the CONFIG_THREAD_INFO_IN_TASK option. With this change: - before thread_info was part of the stack and located at the beginning of the stack - now the thread_info struct is moved and located inside the task_struct structure - the stack is allocated and handled like the major other platforms - drop the cpu field of thread_info and use instead the one in task_struct Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sven Schnelle <svens@stackframe.org>
* parisc: disable preemption in send_IPI_allbutself()Sven Schnelle2021-10-301-1/+3
| | | | | | | Otherwise we might not stop all other CPUs. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
* sched/core: Initialize the idle task with preemption disabledValentin Schneider2021-05-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed out by commit de9b8f5dcbd9 ("sched: Fix crash trying to dequeue/enqueue the idle thread") init_idle() can and will be invoked more than once on the same idle task. At boot time, it is invoked for the boot CPU thread by sched_init(). Then smp_init() creates the threads for all the secondary CPUs and invokes init_idle() on them. As the hotplug machinery brings the secondaries to life, it will issue calls to idle_thread_get(), which itself invokes init_idle() yet again. In this case it's invoked twice more per secondary: at _cpu_up(), and at bringup_cpu(). Given smp_init() already initializes the idle tasks for all *possible* CPUs, no further initialization should be required. Now, removing init_idle() from idle_thread_get() exposes some interesting expectations with regards to the idle task's preempt_count: the secondary startup always issues a preempt_disable(), requiring some reset of the preempt count to 0 between hot-unplug and hotplug, which is currently served by idle_thread_get() -> idle_init(). Given the idle task is supposed to have preemption disabled once and never see it re-enabled, it seems that what we actually want is to initialize its preempt_count to PREEMPT_DISABLED and leave it there. Do that, and remove init_idle() from idle_thread_get(). Secondary startups were patched via coccinelle: @begone@ @@ -preempt_disable(); ... cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210512094636.2958515-1-valentin.schneider@arm.com
* parisc: Avoid external interrupts when IPI finishesHelge Deller2020-10-151-3/+6
| | | | | | | No need to allow external interrupts when the IPI loop is going to finish now. Signed-off-by: Helge Deller <deller@gmx.de>
* mm: remove unneeded includes of <asm/pgalloc.h>Mike Rapoport2020-08-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "mm: cleanup usage of <asm/pgalloc.h>" Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in <asm-generic/pgalloc.h> and enable use of the generic functions where appropriate. In addition, functions declared and defined in <asm/pgalloc.h> headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the <asm/pgalloc.h> included all over the place. The first patch in this series removes unneeded includes of <asm/pgalloc.h> In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases <asm/pgalloc.h> header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in <asm/pgalloc.h> and do not require that header. As for the other header files that used to include <asm/pgalloc.h>, it is possible to move that include into the .c file that actually uses symbols from <asm/pgalloc.h> and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport2020-06-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* parisc: add __pdc_cpu_rendezvous()Sven Schnelle2019-09-081-0/+1
| | | | | | | | When stopping SMP cpus send them into rendezvous, so we can start them again later (when kexec'ing a new kernel). Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-4/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* parisc: Count IPI function call interruptsHelge Deller2019-02-211-0/+1
| | | | | | | Like other platforms, count the number of IPI function call interrupts and show it in /proc/interrupts. Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: Move setup_profiling_timer() out of init sectionHelge Deller2018-05-181-2/+1
| | | | | | | | No other architecture has setup_profiling_timer() in the init section, thus on parisc we face this section mismatch warning: Reference from the function devm_device_add_group() to the function .init.text:setup_profiling_timer() Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: Check if secondary CPUs want own PDC callsHelge Deller2018-03-021-1/+6
| | | | | | | | | | | | | | The architecture specification says (for 64-bit systems): PDC is a per processor resource, and operating system software must be prepared to manage separate pointers to PDCE_PROC for each processor. The address of PDCE_PROC for the monarch processor is stored in the Page Zero location MEM_PDC. The address of PDCE_PROC for each non-monarch processor is passed in gr26 when PDCE_RESET invokes OS_RENDEZ. Currently we still use one PDC for all CPUs, but in case we face a machine which is following the specification let's warn about it. Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: Move init_per_cpu() into init sectionHelge Deller2017-09-221-2/+1
| | | | Signed-off-by: Helge Deller <deller@gmx.de>
* sched/headers: Move task->mm handling methods to <linux/sched/mm.h>Ingo Molnar2017-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the following task->mm helper APIs into a new header file, <linux/sched/mm.h>, to further reduce the size and complexity of <linux/sched.h>. Here are how the APIs are used in various kernel files: # mm_alloc(): arch/arm/mach-rpc/ecard.c fs/exec.c include/linux/sched/mm.h kernel/fork.c # __mmdrop(): arch/arc/include/asm/mmu_context.h include/linux/sched/mm.h kernel/fork.c # mmdrop(): arch/arm/mach-rpc/ecard.c arch/m68k/sun3/mmu_emu.c arch/x86/mm/tlb.c drivers/gpu/drm/amd/amdkfd/kfd_process.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/hw/hfi1/file_ops.c drivers/vfio/vfio_iommu_spapr_tce.c fs/exec.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/mmu_notifier.h include/linux/sched/mm.h kernel/fork.c kernel/futex.c kernel/sched/core.c mm/khugepaged.c mm/ksm.c mm/mmu_context.c mm/mmu_notifier.c mm/oom_kill.c virt/kvm/kvm_main.c # mmdrop_async_fn(): include/linux/sched/mm.h # mmdrop_async(): include/linux/sched/mm.h kernel/fork.c # mmget_not_zero(): fs/userfaultfd.c include/linux/sched/mm.h mm/oom_kill.c # mmput(): arch/arc/include/asm/mmu_context.h arch/arc/kernel/troubleshoot.c arch/frv/mm/mmu-context.c arch/powerpc/platforms/cell/spufs/context.c arch/sparc/include/asm/mmu_context_32.h drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/core/uverbs_main.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/exec.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/events/uprobes.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/oom_kill.c mm/process_vm_access.c mm/rmap.c mm/swapfile.c mm/util.c virt/kvm/async_pf.c # mmput_async(): include/linux/sched/mm.h kernel/fork.c mm/oom_kill.c # get_task_mm(): arch/arc/kernel/troubleshoot.c arch/powerpc/platforms/cell/spufs/context.c drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/util.c # mm_access(): fs/proc/base.c include/linux/sched/mm.h kernel/fork.c mm/process_vm_access.c # mm_release(): arch/arc/include/asm/mmu_context.h fs/exec.c include/linux/sched/mm.h include/uapi/linux/sched.h kernel/exit.c kernel/fork.c Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* mm: add new mmgrab() helperVegard Nossum2017-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | | Apart from adding the helper function itself, the rest of the kernel is converted mechanically using: git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/' git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. (Michal Hocko provided most of the kerneldoc comment.) Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* parisc: Check return value of smp_boot_one_cpu()Helge Deller2016-09-201-2/+2
| | | | | | | Check return value of smp_boot_one_cpu() whether CPU could be brought up. Reported-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
* arch/hotplug: Call into idle with a proper stateThomas Gleixner2016-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Let the non boot cpus call into idle with the corresponding hotplug state, so the hotplug core can handle the further bringup. That's a first step to convert the boot side of the hotplugged cpus to do all the synchronization with the other side through the state machine. For now it'll only start the hotplug thread and kick the full bringup of the cpu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* parisc: Remove unused functionRickard Strandqvist2015-02-171-3/+0
| | | | | | | | | Remove the function smp_send_start() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: do not count IPI calls twiceHelge Deller2013-11-071-5/+0
| | | | | | | | | | The number of IPI calls is already visible as per-cpu IPI irq counters in/proc/cpuinfo, so let's drop this additional counting. This partly reverts: cd85d55 parisc: more irq statistics in /proc/interrupts Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: kill SMP single function call interruptJiang Liu2013-10-131-7/+1
| | | | | | | | | | | | Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: delete __cpuinit usage from all usersPaul Gortmaker2013-07-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the parisc uses of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* parisc: tlb flush counting fix for SMP and UPHelge Deller2013-05-071-11/+0
| | | | | | | Fix up build error on UP and show correctly number of function call (ipi) irqs. Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: more irq statistics in /proc/interruptsHelge Deller2013-05-071-1/+2
| | | | | | | Add framework and initial values for more fine grained statistics in /proc/interrupts. Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: Use generic idle loopThomas Gleixner2013-04-081-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Link: http://lkml.kernel.org/r/20130321215234.956305981@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* parisc: Smp: remove call to ipi_call_lock()/ipi_call_unlock()Yong Zhang2012-06-051-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | ipi_call_lock/unlock() lock resp. unlock call_function.lock. This lock protects only the call_function data structure itself, but it's completely unrelated to cpu_online_mask. The mask to which the IPIs are sent is calculated before call_function.lock is taken in smp_call_function_many(), so the locking around set_cpu_online() is pointless and can be removed. [ tglx: Massaged changelog ] Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: ralf@linux-mips.org Cc: sshtylyov@mvista.com Cc: david.daney@cavium.com Cc: nikunj@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: axboe@kernel.dk Cc: peterz@infradead.org Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Link: http://lkml.kernel.org/r/1338275765-3217-4-git-send-email-yong.zhang0@gmail.com Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds2012-05-211-22/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug cleanups from Thomas Gleixner: "This series is merily a cleanup of code copied around in arch/* and not changing any of the real cpu hotplug horrors yet. I wish I'd had something more substantial for 3.5, but I underestimated the lurking horror..." Fix up trivial conflicts in arch/{arm,sparc,x86}/Kconfig and arch/sparc/include/asm/thread_info_32.h * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) um: Remove leftover declaration of alloc_task_struct_node() task_allocator: Use config switches instead of magic defines sparc: Use common threadinfo allocator score: Use common threadinfo allocator sh-use-common-threadinfo-allocator mn10300: Use common threadinfo allocator powerpc: Use common threadinfo allocator mips: Use common threadinfo allocator hexagon: Use common threadinfo allocator m32r: Use common threadinfo allocator frv: Use common threadinfo allocator cris: Use common threadinfo allocator x86: Use common threadinfo allocator c6x: Use common threadinfo allocator fork: Provide kmemcache based thread_info allocator tile: Use common threadinfo allocator fork: Provide weak arch_release_[task_struct|thread_info] functions fork: Move thread info gfp flags to header fork: Remove the weak insanity sh: Remove cpu_idle_wait() ...
| * parisc: Use generic idle thread allocationThomas Gleixner2012-04-261-21/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Link: http://lkml.kernel.org/r/20120420124557.988947805@linutronix.de
| * smp: Add task_struct argument to __cpu_up()Thomas Gleixner2012-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Preparatory patch to make the idle thread allocation for secondary cpus generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20120420124556.964170564@linutronix.de
* | parisc/CPU hotplug: Add missing call to notify_cpu_starting()Srivatsa S. Bhat2012-05-151-1/+7
|/ | | | | | | | | | | | The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-and-Tested-by: Mikulas Patocka <mpatocka@redhat.com> Acked-and-Tested-by: Tobias Ulmer <tobiasu@tmux.org> Tested-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'parisc-misc' of ↵Linus Torvalds2012-03-311-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PARISC misc updates from James Bottomley: "This is a couple of minor updates (fixing lws futex locking and removing some obsolete cpu_*_map calls)." * tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] remove references to cpu_*_map. [PARISC] futex: Use same lock set as lws calls
| * [PARISC] remove references to cpu_*_map.Rusty Russell2012-02-271-2/+1
| | | | | | | | | | | | | | This has been obsolescent for a while; time for the final push. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | Disintegrate asm/system.h for PA-RISCDavid Howells2012-03-281-1/+0
|/ | | | | | | Disintegrate asm/system.h for PA-RISC. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-parisc@vger.kernel.org
* atomic: use <linux/atomic.h>Arun Sharma2011-07-261-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()Peter Zijlstra2011-04-141-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | For future rework of try_to_wake_up() we'd like to push part of that function onto the CPU the task is actually going to run on. In order to do so we need a generic callback from the existing scheduler IPI. This patch introduces such a generic callback: scheduler_ipi() and implements it as a NOP. BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions! Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* parisc: Replace old style lock init in smp.cThomas Gleixner2009-12-161-3/+6
| | | | | | | | | | SPIN_LOCK_UNLOCKED is deprecated. Init the per cpu locks at runtime instead. (Also kills the unused smp_lock --kyle) Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
* Merge branch 'rusty-cpumask-parisc' into pariscKyle McMartin2009-04-021-9/+9
|\
| * cpumask: Use accessors code.: pariscRusty Russell2009-03-161-6/+6
| | | | | | | | | | | | | | | | | | | | Impact: use new API Use the accessors rather than frobbing bits directly. Most of this is in arch code I haven't even compiled, but it is mostly straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
| * cpumask: arch_send_call_function_ipi_mask: pariscRusty Russell2009-03-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | We're weaning the core code off handing cpumask's around on-stack. This introduces arch_send_call_function_ipi_mask(), and by defining it, the old arch_send_call_function_ipi is defined by the core code. We also take the chance to change send_IPI_mask() and use the new for_each_cpu() iterator. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | parisc: add ftrace (function and graph tracer) functionalityHelge Deller2009-03-311-1/+2
|/ | | | | | | | | | This patch adds the ftrace debugging functionality to the parisc kernel. It will currently only work with 64bit kernels, because the gcc options -pg and -ffunction-sections can't be enabled at the same time and -ffunction-sections is still needed to be able to link 32bit kernels. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
* parisc: Replace NR_CPUS in parisc codeHelge Deller2009-01-051-11/+13
| | | | | | | parisc: Replace most arrays sized by NR_CPUS with percpu variables. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
* parisc: trivial fixesHelge Deller2009-01-051-6/+2
| | | | | | | | | | | | | | trivial fixes: - use KERN_WARNING for printk() - use BUG_ON() instead of "if (xx) BUG();" Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* cpumask: centralize cpu_online_map and cpu_possible_mapRusty Russell2008-12-131-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup Each SMP arch defines these themselves. Move them to a central location. Twists: 1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a CONFIG_INIT_ALL_POSSIBLE for this rather than break them. 2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'. Those archs simply have phys_cpu_present_map replaced everywhere. 3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky so I just manipulate them both in sync. 4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map' declarations. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Tested-by: Tony Luck <tony.luck@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Mike Travis <travis@sgi.com> Cc: ink@jurassic.park.msu.ru Cc: rmk@arm.linux.org.uk Cc: starvik@axis.com Cc: tony.luck@intel.com Cc: takata@linux-m32r.org Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: paulus@samba.org Cc: schwidefsky@de.ibm.com Cc: lethal@linux-sh.org Cc: wli@holomorphy.com Cc: davem@davemloft.net Cc: jdike@addtoit.com Cc: mingo@redhat.com
* on_each_cpu(): kill unused 'retry' parameterJens Axboe2008-06-261-1/+1
| | | | | | | | | It's not even passed on to smp_call_function() anymore, since that was removed. So kill it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* parisc: convert to generic helpers for IPI function callsJens Axboe2008-06-261-113/+21
| | | | | | | | | | | This converts parisc to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Tested by Kyle, seems to work. Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [PARISC] Kill off broken irqstack codeKyle McMartin2007-10-181-12/+0
| | | | | | | It's been unfinished and broken long enough, and I have some ideas on how to do it more cleanly. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
* Remove fs.h from mm.hAlexey Dobriyan2007-07-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-12 10:06:41 +0000