summaryrefslogtreecommitdiffstats
path: root/arch/xtensa/boot/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* xtensa: move CONFIG_CPU_*_ENDIAN defines to KconfigMasahiro Yamada2021-04-041-4/+0
| | | | | | | | | | | | | | | | | | | | | | Move the definition of CONFIG_CPU_*_ENDIAN to Kconfig, the best place for CONFIG options. I slightly simplified the test code. You can use the -P option to suppress linemarker generation. The grep command is unneeded. $ echo __XTENSA_EB__ | xtensa-linux-gcc -E - # 1 "<stdin>" # 1 "<built-in>" # 1 "<command-line>" # 1 "<stdin>" 1 $ echo __XTENSA_EB__ | xtensa-linux-gcc -E -P - 1 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Message-Id: <20210313122342.69995-1-masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: add uImage and xipImage to targetsMax Filippov2020-07-281-0/+1
| | | | | | | | uImage and xipImage are always rebuilt in the xtensa kernel build process. Add them to 'targets' to avoid that. Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: move vmlinux.bin[.gz] to boot subdirectoryMax Filippov2020-07-281-5/+6
| | | | | | | | | vmlinux.bin and vmlinux.bin.gz are always rebuilt in the kernel build process. Add them to 'targets' and move them to the boot subdirectory where their rules are. Update make rules that refer to them. Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: remove meaningless export ccflags-yMasahiro Yamada2020-03-091-1/+0
| | | | | | | | | | | arch/xtensa/boot/Makefile does not define ccflags-y at all. Please do not export ccflags-y because it is meant to be effective only in the current Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Message-Id: <20200310045925.25396-1-masahiroy@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: add XIP kernel supportMax Filippov2019-11-261-0/+5
| | | | | | | | | | | | | | | | | | XIP (eXecute In Place) kernel image is the image that can be run directly from ROM, using RAM only for writable data. XIP xtensa kernel differs from regular xtensa kernel in the following ways: - it has exception/IRQ vectors merged into text section. No vectors relocation takes place at kernel startup. - .data/.bss location must be specified in the kernel configuration, its content is copied there in the _startup function. - .init.text is merged with the rest of text and is executed from ROM. - when MMU is used the virtual address where the kernel will be mapped must be specified in the kernel configuration. It may be in the KSEG or in the KIO, __pa macro is adjusted to be able to handle both. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: add NOTES section to the linker scriptMax Filippov2018-10-291-1/+1
| | | | | | | | | | This section collects all source .note.* sections together in the vmlinux image. Without it .note.Linux section may be placed at address 0, while the rest of the kernel is at its normal address, resulting in a huge vmlinux.bin image that may not be linked into the xtensa Image.elf. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* kbuild: remove deprecated host-progs variableMasahiro Yamada2018-08-091-2/+1
| | | | | | | | | | | The host-progs has been kept as an alias of hostprogs-y for a long time (at least since the beginning of Git era), with the clear prompt: Usage of host-progs is deprecated. Please replace with hostprogs-y! Enough time for the migration has passed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: clean up bootable image build targetsMax Filippov2017-03-011-7/+16
| | | | | | | | | | | Currently xtensa uses 'zImage' as a synonym of 'all', but in fact xtensa supports three targets: 'Image' (ELF image with reset vector), 'zImage' (compressed redboot image) and 'uImage' (U-Boot image). Provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: don't use echo -e needlesslyMax Filippov2013-09-061-1/+1
| | | | | | | | | | -e is not needed to output strings without escape sequences. This breaks big endian FSF build when the shell is dash, because its builtin echo doesn't understand '-e' switch and outputs it in the echoed string. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: use new common dtc ruleStephen Warren2013-02-231-12/+0
| | | | | | | | | | | | | The current rules have the .dtb files build in a different directory from the .dts files. This patch changes xtensa to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. This requires moving parts of arch/xtensa/boot/Makefile into newly created arch/xtensa/boot/dts/Makefile, and updating arch/xtensa/Makefile to call the new Makefile. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: don't try to build DTB when OF is disabledMax Filippov2012-12-181-1/+1
| | | | | Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: add support for the XTFPGA boardsMax Filippov2012-12-181-0/+1
| | | | | | | | | The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with an Xtensa processor and an OpenCores Ethernet device. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: add device trees supportMax Filippov2012-12-181-0/+11
| | | | | | | | | | | | | | | | | | | | Device trees allow specification of hardware topology and device parameters at runtime instead of hard-coding them in platform setup code. This allows running single binary kernel on a range of compatible boards. New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat device tree is passed in it. Note that current interrupt mapping scheme uses single cell for interrupt identification. That means that IRQ numbers used in DTS must be CPU internal IRQ numbers, not external. It is possible to extend interrupt identification to two cells, and use second cell to tell external IRQ numbers form internal. That would allow to use single DTS on multiple boards with different mapping of external IRQ numbers. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: add U-Boot image support (uImage).Max Filippov2012-12-181-1/+2
| | | | | Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: clean up boot make rulesMax Filippov2012-12-181-0/+10
| | | | | | | | | - remove duplicate rules for binary and packed image - use predefined macros for ld/objcopy/gzip - remove build-id section from bootable elf image Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: drop CONFIG_EMBEDDED_RAMDISKMax Filippov2012-10-031-1/+1
| | | | | | | | | | | Remove Kconfig entries, boot subdirectory, dependencies from other boot-* Makefiles, and sections from ld scripts. Remove stale redboot code that used to pass initrd addresses in a3 and a4 to _start. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: change to new flag variablematt mooney2011-03-171-1/+1
| | | | | | | | Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* kbuild: restore arch/{ppc/xtensa}/boot cflagsMilton Miller2007-10-201-1/+2
| | | | | | | | | | | Commit 9a39e273d4df0560c724c5fe71f6314a0583ca2b removed the boot directory addition to CFLAGS that was being used by the subdirectory builds. For the other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly sets that to empty as it is explicitly for a single directory only. Append to KBUILD_CFLAGS instead. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: fix up CFLAGS usageSam Ravnborg2007-10-141-3/+2
| | | | | | | | | Only in very rare cases is it needed to change CFLAGS outside of arch/*/Makefile. Fix up all wrong cases - in most cases the use of EXTRA_CFLAGS is the only thing needed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [PATCH] xtensa: Removed local copy of zlib and fixed O= supportChris Zankel2005-06-301-7/+3
| | | | | | | | | | Removed an unnecessary local copy of zlib (sorry for the add'l traffic). Fixed 'O=' support (thanks to Jan Dittmer for pointing it out). Some minor clean-ups in the make files. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2Chris Zankel2005-06-241-0/+37
The attached patches provides part 2 of an architecture implementation for the Tensilica Xtensa CPU series. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-11 23:51:50 +0000