summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2022-05-251-4/+35
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
| * drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridgeMarek Vasut2022-05-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Implement a simple bridge driver for this serializer. -- - Add sentinel of_device_table - Add RB from Sam - Rename to fsl-ldb altogether Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org V2: - Rename syscon to fsl,syscon V3: - Consistently use MX8MP V4: - Fix MODULE_DESCRIPTION to also use MX8MP Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de
| * drm/display: Move HDCP helpers into display-helper moduleThomas Zimmermann2022-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move DRM's HDCP helper library into the display/ subdirectory and add it to DRM's display helpers. Split the header file into core and helpers. Update all affected drivers. No functional changes. v3: * fix Kconfig dependencies v2: * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de
| * drm/display: Introduce a DRM display-helper moduleThomas Zimmermann2022-04-251-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the DP-helper module with a display-helper module. The support for DisplayPort becomes an internal option that drivers have to select. Update all related Kconfig and Makefile rules. Besides the existing code for DisplayPort, the new module will contain helpers for other video-output standards, such as HDMI. Drivers will have to select their required video-output helpers. Linking all display-related code into a single module avoids the proliferation of small kernel modules. The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz, and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace to drm_display_helper. v2: * mention module parameters in commit message (Javier) * distiguish between display module and DP support in Kconfig * update Makefile rules for DP helpers * move Kconfig rules into separate file under display/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de
| * drm/bridge: Fix it6505 Kconfig DRM_DP_AUX_BUS dependencyRobert Foss2022-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | it6505 depends on DRM_DP_AUX_BUS, the kconfig for it6505 should reflect this dependency using 'select'. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421131415.1289469-1-robert.foss@linaro.org
| * drm/bridge: lt9211: Add Lontium LT9211 bridge driverMarek Vasut2022-04-191-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly capable at converting formats, but sadly it is also highly undocumented. This driver is written without any documentation from Lontium and based only on shreds of information available in various obscure example codes, hence long runs of unknown register patches and lengthy delays in various places. Whichever register meaning could be divined from its behavior has at least a comment around it. Currently the only mode tested is Single-link DSI to Single-link LVDS. Dual-link LVDS might work as well, the register programming is in place, but is untested. Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de
| * drm: bridge: icn6211: Convert to regmapMarek Vasut2022-04-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To make debugging easier, convert driver to regmap. Implement read and write regmap tables for known registers, keep all known register readable and mark those which are obviously read-only as not writeable. Use common I2C regmap for the I2C configuration, implement custom regmap bus for DSI configuration. The later is mandatory as this chip requires one extra byte set to read access length between register address and data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Acked-by: Mark Brown <broonie@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de
| * Merge drm/drm-next into drm-misc-nextMaxime Ripard2022-04-051-2/+1
| |\ | | | | | | | | | | | | | | | Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
| * | drm/bridge: tc358767: Add DSI-to-DPI mode supportMarek Vasut2022-03-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TC358767/TC358867/TC9595 are all capable of operating in multiple modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Add support for the DSI-to-DPI mode. This requires skipping most of the (e)DP initialization code, which is currently a large part of this driver, hence it is better to have far simpler separate tc_dpi_bridge_funcs and their implementation. The configuration of DPI output is also much simpler. The configuration of the DSI input is rather similar to the other TC bridge chips. The Pixel PLL in DPI output mode does not have the 65..150 MHz limitation imposed on the (e)DP output mode, so this limitation is skipped to permit operating panels with far slower pixel clock, even below 9 MHz. This mode of operation of the PLL is valid and tested. The detection of bridge mode is now added into tc_probe_bridge_mode(), where in case a DPI panel is found on port@1 endpoint@1, the mode is assumed to be DSI-to-DPI. If (e)DP is detected on port@2, the mode is assumed to be DPI-to-(e)DP. The DSI-to-(e)DP mode is not supported due to lack of proper hardware, but this would be some sort of mix between the two aforementioned modes. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-12-marex@denx.de
| * | drm/bridge: it6505: Fix build errorYueHaibing2022-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If DRM_ITE_IT6505 is y but DRM_DP_HELPER is m, building failed: drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_i2c_remove': ite-it6505.c:(.text+0x35c): undefined reference to `drm_dp_aux_unregister' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_read': ite-it6505.c:(.text+0x420): undefined reference to `drm_dp_dpcd_read' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_get_dpcd': ite-it6505.c:(.text+0x4a4): undefined reference to `drm_dp_dpcd_read' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_write': ite-it6505.c:(.text+0x52c): undefined reference to `drm_dp_dpcd_write' Select DRM_DP_HELPER for DRM_ITE_IT6505 to fix this. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220317094724.25972-1-yuehaibing@huawei.com
* | | drm/bridge: ite-it6505: add missing Kconfig option selectFabien Parent2022-05-041-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | The IT6505 is using functions provided by the DRM_DP_HELPER driver. In order to avoid having the bridge enabled but the helper disabled, let's add a select in order to be sure that the DP helper functions are always available. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com
* | Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2022-03-241-0/+12
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ...
| * drm/bridge: add it6505 driverAllen Chen2022-02-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the iTE IT6505. This device can convert DPI signal to DP output. From: Allen Chen <allen.chen@ite.com.tw> Tested-by: Hsin-yi Wang <hsinyi@chromium.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw
| * drm/dp: Move DisplayPort helpers into separate helper moduleThomas Zimmermann2022-01-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move DisplayPort functions into a separate module to reduce the size of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c This change can help to reduce the size of the kernel binary. Some numbers from a x86-64 test build: Before: drm_kms_helper.ko: 447480 bytes After: drm_dp_helper.ko: 216632 bytes drm_kms_helper.ko: 239424 bytes For early-boot graphics, generic DRM drivers, such as simpledrm, require DRM KMS helpers to be built into the kernel. Generic helper functions for DisplayPort take up a significant portion of DRM KMS helper library. These functions are not used by generic drivers and can be loaded as a module. v3: * fix include statement in DRM selftests v2: * move DP helper code into dp/ (Jani) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-4-tzimmermann@suse.de
| * drm: bridge: fix unmet dependency on DRM_KMS_HELPER for DRM_PANEL_BRIDGEJulian Braha2022-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When DRM_CHIPONE_ICN6211 is selected, and DRM_KMS_HELPER is not selected, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n] Selected by [y]: - DRM_CHIPONE_ICN6211 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y] This is because DRM_CHIPONE_ICN6211 selects DRM_PANEL_BRIDGE without depending on or selecting DRM_KMS_HELPER, despite DRM_PANEL_BRIDGE depending on DRM_KMS_HELPER. This unmet dependency bug was detected by Kismet, a static analysis tool for Kconfig. Fixes: ce517f18944e ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge") Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220117052146.75811-1-julianbraha@gmail.com
* | drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERSThomas Zimmermann2022-03-171-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a number of undefined references to drm_kms_helper.ko in drm_dp_helper.ko: arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state': drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work': drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work': drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work': drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event' This happens if panel-edp.ko has been configured with DRM_PANEL_EDP=y DRM_DP_HELPER=y DRM_KMS_HELPER=m which builds DP helpers into the kernel and KMS helpers sa a module. Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem. To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers cannot be selected directly by the user, config symbols should avoid depending on it anyway. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP") Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Brian Masney <bmasney@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Linux Kernel Functional Testing <lkft@linaro.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/478296/
* drm/bridge: parade-ps8640: Populate devices on aux-busPhilip Chen2021-11-111-0/+1
| | | | | | | | | | | | | | | | | | | | | Conventionally, panel is listed under the root of the device tree. When userland asks for display mode, ps8640 bridge is responsible for returning EDID when ps8640_bridge_get_edid() is called. Now enable a new option of listing panel under "aux-bus" of ps8640 bridge node in the device tree. In this case, panel driver can retrieve EDID by triggering AUX transactions, without ps8640_bridge_get_edid() calls at all. To prevent the "old" and "new" options from interfering with each other's logic flow, disable DRM_BRIDGE_OP_EDID when the new option is taken. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211028105754.v5.2.I09899dea340f11feab97d719cb4b62bef3179e4b@changeid
* drm/bridge: ti-sn65dsi86: Add support for the DP AUX busDouglas Anderson2021-06-111-0/+1
| | | | | | | | | | | We want to provide our panel with access to the DP AUX channel. The way to do this is to let our panel be a child of ours using the fancy new DP AUX bus support. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.8.Ib5fe0638da85800141ce141bb8e441c5f25438d4@changeid
* drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driverMarek Vasut2021-06-081-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on, but easy to add. The driver operates the chip via I2C bus. Currently the LVDS clock are always derived from DSI clock lane, which is the usual mode of operation. Support for clock from external oscillator is not implemented, but it is easy to add if ever needed. Only RGB888 pixel format is implemented, the LVDS666 is not supported, but could be added if needed. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de
* drm/bridge: DRM_CROS_EC_ANX7688 should depend on I2C_CROS_EC_TUNNELGeert Uytterhoeven2021-05-271-0/+1
| | | | | | | | | | | | | | The ChromeOS EC ANX7688 bridge is connected to a ChromeOS Embedded Controller, and is accessed using I2C tunneling through the Embedded Controller. Hence add a dependency on I2C_CROS_EC_TUNNEL, to prevent asking the user about this driver when configuring a kernel without support for the ChromeOS EC tunnel I2C bus. Fixes: 44602b10d7f2a5f7 ("drm/bridge: Add ChromeOS EC ANX7688 bridge driver support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/d107d1840b83607baee8571cc5d88973fc32b519.1622015323.git.geert+renesas@glider.be
* drm/bridge: Add ChromeOS EC ANX7688 bridge driver supportEnric Balletbo i Serra2021-05-181-0/+12
| | | | | | | | | | | | | | | | | | | | | This driver adds support for the ChromeOS EC ANX7688 HDMI to DP converter For our use case, the only reason the Linux kernel driver is necessary is to reject resolutions that require more bandwidth than what is available on the DP side. DP bandwidth and lane count are reported by the bridge via 2 registers and, as far as we know, only chips that have a firmware version greater than 0.85 support these two registers. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [The driver is OF only so should depends on CONFIG_OF] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [convert to i2c driver, rename to cros_ec_anx7688, add err checks] Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210518141927.24795-3-dafna.hirschfeld@collabora.com
* drm/bridge: fix LONTIUM_LT8912B dependenciesAdrien Grassein2021-05-051-0/+1
| | | | | | | | | | | | LONTIUM_LT8912B uses "drm_display_mode_to_videomode" from DRM framework that needs VIDEOMODE_HELPERS to be enabled. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Reported-by: Michal Suchánek <msuchanek@suse.de> Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210504220207.4004511-1-adrien.grassein@gmail.com
* drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-driversDouglas Anderson2021-05-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Let's use the newly minted aux bus to break up the driver into sub drivers. We're not doing a full breakup here: all the code is still in the same file and remains largely untouched. The big goal here of using sub-drivers is to allow part of our code to finish probing even if some other code needs to defer. This can solve some chicken-and-egg problems. Specifically: - In commit 48834e6084f1 ("drm/panel-simple: Support hpd-gpios for delaying prepare()") we had to add a bit of a hack to simpel-panel to support HPD showing up late. We can get rid of that hack now since the GPIO part of our driver can finish probing early. - We have a desire to expose our DDC bus to simple-panel (and perhaps to a backlight driver?). That will end up with the same chicken-and-egg problem. A future patch to move this to a sub-driver will fix it. - If/when we support the PWM functionality present in the bridge chip for a backlight we'll end up with another chicken-and-egg problem. If we allow the PWM to be a sub-driver too then it solves this problem. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.9.I3e68fa38c4ccbdbdf145cad2b01e83a1e5eac302@changeid
* Merge drm/drm-next into drm-misc-nextMaxime Ripard2021-04-261-0/+3
|\ | | | | | | | | | | Christian needs some patches from drm/next Signed-off-by: Maxime Ripard <maxime@cerno.tech>
| * Merge tag 'drm-misc-next-fixes-2021-04-22' of ↵Dave Airlie2021-04-231-0/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next A few fixes for the next merge window, with some build fixes for anx7625 and lt8912b bridges, incorrect error handling for lt8912b and TTM, and one fix for TTM page limit accounting. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210422163329.dvbuwre3akwdmzjt@gilmour
| | * drm: bridge: fix LONTIUM use of mipi_dsi_() functionsRandy Dunlap2021-04-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Lontium DRM bridge drivers use mipi_dsi_() function interfaces so they need to select DRM_MIPI_DSI to prevent build errors. ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! WARNING: modpost: suppressed 5 unresolved symbol warnings because there were too many) Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge") Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Adren Grassein <adrien.grassein@gmail.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210415183639.1487-1-rdunlap@infradead.org
* | | drm: bridge: add it66121 driverPhong LE2021-04-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit is a simple driver for bridge HMDI it66121. The input format is RBG and there is no color conversion. Audio, HDCP and CEC are not supported yet. Signed-off-by: Phong LE <ple@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-3-narmstrong@baylibre.com
* | | drm/bridge/sii8620: fix dependency on extconRobert Foss2021-04-191-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRM_SIL_SII8620 kconfig has a weak `imply` dependency on EXTCON, which causes issues when sii8620 is built as a builtin and EXTCON is built as a module. The symptoms are 'undefined reference' errors caused by the symbols in EXTCON not being available to the sii8620 driver. Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org
* | drm/bridge: fix typo in KconfigDafna Hirschfeld2021-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | fix 's/controller/controllers/' in the sentence: Most display controller handle display connectors... Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-2-dafna.hirschfeld@collabora.com
* | drivers: gpu: drm: bridge: fix kconfig dependency on DRM_KMS_HELPERJulian Braha2021-04-011-0/+1
|/ | | | | | | | | | | | | | | | | | | When DRM_TOSHIBA_TC358762 is enabled and DRM_KMS_HELPER is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n] Selected by [y]: - DRM_TOSHIBA_TC358762 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y] This is because DRM_TOSHIBA_TC358762 selects DRM_PANEL_BRIDGE, without depending on or selecting DRM_KMS_HELPER, despite that config option depending on DRM_KMS_HELPER. Signed-off-by: Julian Braha <julianbraha@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222215502.24487-1-julianbraha@gmail.com
* drm/bridge: Introduce LT8912B DSI to HDMI bridgeAdrien Grassein2021-03-261-0/+14
| | | | | | | | | | Lontium LT8912B is a DSI to HDMI bridge. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-3-adrien.grassein@gmail.com
* drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridgeJagan Teki2021-03-251-0/+13
| | | | | | | | | | | | | | ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone. It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format. Add bridge driver for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-2-jagan@amarulasolutions.com
* drm: bridge: add support for lontium LT9611UXC bridgeDmitry Baryshkov2020-11-071-0/+13
| | | | | | | | | | | | Add support for Lontium LT9611UXC HDMI bridge. Lontium LT9611UXC is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output. Despite name being similar to LT9611, these devices are different enough to warrant separate driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201102011435.1100930-3-dmitry.baryshkov@linaro.org
* drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridgeSwapnil Jakhade2020-09-181-0/+2
| | | | | | | | | | | | | | | | | | | | Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP) and embedded Display Port (eDP) standards. It integrates uCPU running the embedded Firmware (FW) interfaced over APB interface. Basically, it takes a DPI stream as input and outputs it encoded in DP format. Currently, it supports only SST mode. Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridgeMarek Vasut2020-08-121-0/+8
| | | | | | | | | | | | | | | | | Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived from tc358764 driver and panel-raspberrypi-touchscreen. This driver is meant to replace the panel-raspberrypi-touchscreen too, as the bridge connection can be described in DT too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200809105705.6334-2-marex@denx.de
* display/drm/bridge: TC358775 DSI/LVDS driverVinay Simha BN2020-08-101-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver is tested with two panels individually with Apq8016-IFC6309 board https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc 1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24" 2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24" - power off sequence in proper order - put_unaligned_be16, put_unaligned_le32 macros used - static function for mode_valid - len initialized - MODE_CLOCK_HIGH handled properly - bus_formats handled in mode_valid - GENMASK and FIELD_PREP used - Kconfig proper indentation - error handling endpoint data-lanes - check for bus_formats unsupported - display_timings naming local variables - help modified - ~vsdelay dynamic value set based on the calculation of dsi speed, output speed, blanking - panel->connector_type removed - dual port implemented - devm_drm_panel_bridge_add method used instead of panel description modified - regulator enable and disable with proper orders and delays as per the spec - removed drm_connector_status - added bus_formats - mdelay to usleep_range - magic number to macros for CLRSI and mux registers description modified - replaced u32 instead of uint32_t - updated alphabetic order of headers - added SPDX identifier license Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-2-git-send-email-simhavcs@gmail.com
* drm/bridge: Introduce LT9611 DSI to HDMI bridgeVinod Koul2020-07-261-0/+13
| | | | | | | | | | | | | | Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # fix lt9611_bridge_mode_valid Link: https://patchwork.freedesktop.org/patch/msgid/20200723163442.1280414-4-vkoul@kernel.org
* treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2020-06-141-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* drm/bridge: chrontel-ch7033: Add a new driverLubomir Rintel2020-05-051-0/+10
| | | | | | | | | | | | | | | | | | | | | This is a driver for video encoder with VGA and DVI/HDMI outputs. There is no documentation for the chip -- the operation was guessed from what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names come from the ch7035 driver in Mediatek's GPL code dump. Only bare minimum is implemented -- no fancy stuff, such as scaling. That would only worsen our misery. We don't load the firmware and we don't need to even bother enabling the MCU. There are probably no distributable firmware images anyway. Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, with VGA as well as DVI. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk
* drm/bridge: Add NWL MIPI DSI host controller supportGuido Günther2020-04-091-0/+16
| | | | | | | | | | | | | | | | | | | This adds initial support for the NWL MIPI DSI Host controller found on i.MX8 SoCs. It adds support for the i.MX8MQ but the same IP can be found on e.g. the i.MX8QXP. It has been tested on the Librem 5 devkit using mxsfb. Signed-off-by: Guido Günther <agx@sigxcpu.org> Co-developed-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Tested-by: Robert Chiras <robert.chiras@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1cf5750f734e33d005564cd89c576eaf3c1c192b.1586427783.git.agx@sigxcpu.org
* drm/bridge: Add driver for the TI TPD12S015 HDMI level shifterLaurent Pinchart2020-02-261-0/+8
| | | | | | | | | | | | | The TI TPD12S015 is an HDMI level shifter and ESD protector controlled through GPIOs. Add a DRM bridge driver for the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-17-laurent.pinchart@ideasonboard.com
* drm/bridge: Add bridge driver for display connectorsLaurent Pinchart2020-02-261-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | Display connectors are modelled in DT as a device node, but have so far been handled manually in several bridge drivers. This resulted in duplicate code in several bridge drivers, with slightly different (and thus confusing) logics. In order to fix this, implement a bridge driver for display connectors. The driver centralises logic for the DVI, HDMI, VGAn composite and S-video connectors and exposes corresponding bridge operations. This driver in itself doesn't solve the issue completely, changes in bridge and display controller drivers are needed to make use of the new connector driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-16-laurent.pinchart@ideasonboard.com
* drm/bridge: dumb-vga-dac: Rename driver to simple-bridgeLaurent Pinchart2020-02-261-8/+8
| | | | | | | | | | | | | | | The dumb-vga-dac driver can support simple DRM bridges without being limited to VGA DACs. Rename it to simple-bridge. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
* drm/bridge: sii902x: Select SND_SOC_HDMI_CODEC if SND_SOC is configuredJyri Sarha2020-02-101-0/+1
| | | | | | | | | | | | | | To enable HDMI audio the SND_SOC_HDMI_CODEC needs to be configured. Enable HDMI audio by selecting SND_SOC_HDMI_CODEC if SND_SOC is configured. SND_SOC_HDMI_CODEC has no config menu entry and should be selected automatically by the drivers using it. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [narmstrong: atomatically -> automatically] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191129152342.29145-1-jsarha@ti.com
* drm/bridge: Add tc358768 driverPeter Ujfalusi2020-02-101-0/+10
| | | | | | | | | | | | | Add basic support for the Toshiba TC358768 RGB to DSI bridge. Not all the features of the TC358768 is implemented by the initial driver: MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested. Only write is implemented for mipi_dsi_host_ops.transfer. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200131111553.472-3-peter.ujfalusi@ti.com
* drm/bridge: Add I2C based driver for ps8640 bridgeJitao Shi2020-01-221-0/+11
| | | | | | | | | | | | | | This patch adds drm_bridge driver for parade DSI to eDP bridge chip. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> [uli: followed API changes, removed FW update feature] Signed-off-by: Ulrich Hecht <uli@fpond.eu> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191230090419.137141-3-enric.balletbo@collabora.com
* drm/bridge: Repurpose lvds-encoder.cFabrizio Castro2019-12-181-4/+4
| | | | | | | | | | | | | | | | | lvds-encoder.c implementation is also suitable for LVDS decoders, not just LVDS encoders. Instead of creating a new driver for addressing support for transparent LVDS decoders, repurpose lvds-encoder.c for the greater good with this patch. This patch only "rebrands" the lvds-encoder.c driver, to make it suitable for hosting LVDS decoders support. The actual support for LVDS decoders will come with a later patch. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-6-git-send-email-fabrizio.castro@bp.renesas.com
* drm/bridge: Fix Kconfig indentationKrzysztof Kozlowski2019-11-201-4/+4
| | | | | | | | | | Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191120133634.11601-1-krzk@kernel.org
* drm/bridge: move ANA78xx driver to analogix subdirectoryIcenowy Zheng2019-11-081-10/+0
| | | | | | | | | | | | | As ANA78xx chips are designed and produced by Analogix Semiconductor, Inc, move their driver codes into analogix subdirectory. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de
* drm/bridge: sil_sii8620: make remote control optional.Ronald Tschalär2019-10-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d6abe6df706c ("drm/bridge: sil_sii8620: do not have a dependency of RC_CORE") changed the driver to select both RC_CORE and INPUT. However, this causes problems with other drivers, in particular an input driver that depends on MFD_INTEL_LPSS_PCI (to be added in a separate commit): drivers/clk/Kconfig:9:error: recursive dependency detected! drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by MFD_INTEL_LPSS drivers/mfd/Kconfig:566: symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI drivers/mfd/Kconfig:580: symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI drivers/input/keyboard/Kconfig:73: symbol KEYBOARD_APPLESPI depends on INPUT drivers/input/Kconfig:8: symbol INPUT is selected by DRM_SIL_SII8620 drivers/gpu/drm/bridge/Kconfig:83: symbol DRM_SIL_SII8620 depends on DRM_BRIDGE drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_PL111 drivers/gpu/drm/pl111/Kconfig:1: symbol DRM_PL111 depends on COMMON_CLK According to the docs and general consensus, select should only be used for non user-visible symbols, but both RC_CORE and INPUT are user-visible. Furthermore almost all other references to INPUT throughout the kernel config are depends, not selects. For this reason the first part of this change reverts the commit. In order to address the original reason for the commit, namely that not all boards use the remote controller functionality and hence should not need have to deal with RC_CORE, the second part of this change now makes the remote control support in the driver optional and contingent on RC_CORE being defined. And with this the hard dependency on INPUT also goes away as that is only needed if RC_CORE is defined (which in turn already depends on INPUT). CC: Inki Dae <inki.dae@samsung.com> CC: Andrzej Hajda <a.hajda@samsung.com> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> [a.hajda: applied fixup provided by Arnd Bergmann] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419081926.13567-2-ronald@innovation.ch
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-12 07:04:49 +0000