summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/qcom/venus/vdec.c
Commit message (Collapse)AuthorAgeFilesLines
* media: venus: vdec: Use output resolution on reconfigureStanimir Varbanov2022-04-241-2/+2
| | | | | | | | | When recalculate output buffer size we have to take into account the output resolution from the firmware received during event change notification. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: venus: Add a handling of QC10C compressed formatStanimir Varbanov2022-04-241-3/+16
| | | | | | | | | | | This adds QC10C compressed pixel format in the Venus driver, and make it possible to discover from v4l2 clients. Note: The QC10C format will be enumerable via VIDIOC_ENUM_FMT when the bitstream is 10-bits and the headers are parsed. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: venus: Add a handling of QC08C compressed formatStanimir Varbanov2022-04-241-3/+15
| | | | | | | | This adds QC08C compressed pixel format in the Venus driver, and make it possible to discover from v4l2 clients. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: venus: vdec: ensure venus is powered on during stream offVikash Garodia2022-04-241-0/+2
| | | | | | | | | | | | Video decoder driver auto-suspends the hardware if there is no exchange of command or response for certain amount of time. In auto suspended state, it becomes mandatory to power on the hardware before requesting it to process a command. The fix ensures the hardware is powered on during stop streaming. Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: venus: vdec: decoded picture buffer handling during reconfig sequenceMansur Alisha Shaik2021-10-211-1/+6
| | | | | | | | | | | | | | | In existing implementation, driver is freeing and un-mapping all the decoded picture buffers(DPB) as part of dynamic resolution change(DRC) handling. As a result, when firmware try to access the DPB buffer, from previous sequence, SMMU context fault is seen due to the buffer being already unmapped. With this change, driver defines ownership of each DPB buffer. If a buffer is owned by firmware, driver would skip from un-mapping the same. Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: Handle fatal errors during encoding and decodingStanimir Varbanov2021-10-211-0/+16
| | | | | | | | | | | | | | According to stateful decoder docs a fatal failure of decoding (and encoding) could be recover it by closing the corresponding file handle and open new one or reinitialize decoding (and encoding) by stop streaming on both queues. In order to satisfy this requirement we add a mechanism ins sys_error_handler and corresponding decoder and encoder drivers to wait for sys_error_done waitqueue in reqbuf. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Tested-by: Vikash Garodia <vgarodia@codeaurora.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: Make sys_error flag an atomic bitopsStanimir Varbanov2021-10-211-1/+1
| | | | | | | | | Make the sys_error flag an atomic bitops in order to avoid locking in sys_error readers. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Tested-by: Vikash Garodia <vgarodia@codeaurora.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: Set buffer to FW based on FW min count requirement.Dikshita Agarwal2021-10-081-7/+13
| | | | | | | | | | | | - Get the min buffer count required by FW from source event change and use the same value to decide actual buffer count and for buffer size calculation. - Setup DPB and OPB buffers after session continue incase of reconfig. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: set work route to fwDikshita Agarwal2021-10-081-0/+17
| | | | | | | | Set work route to FW based on num of vpp pipes. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: update output buffer size during vdec_s_fmt()Mansur Alisha Shaik2021-10-081-1/+4
| | | | | | | | | | | | | Video driver maintains an internal context for the output buffer size. During S_fmt() on capture plane, the output buffer size is not updated in driver context. As a result, during buf_prepare(), the size of the vb2_plane and internal size of the buffer, as maintained by the driver, does not match. This leads to buf_prepare() failure. Update the instance context for the output buffer size during s_fmt(). Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: use pm_runtime_resume_and_get()Mauro Carvalho Chehab2021-05-191-3/+3
| | | | | | | | | | | | | Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. As a bonus, there's no need to check if ret == 1, as pm_runtime_resume_and_get() always return 0 on success. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Fix decoder cmd STOP issueStanimir Varbanov2021-04-061-1/+4
| | | | | | | | | | | | Fixes an issue when issuing a stop command to the controller, negating the following firmware error. "SFR message from FW: Exception: TID = Unknown IP = 0x3b7dc FA = 0x0 cause = 0x6" Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: helper: Decide work modeDikshita Agarwal2021-04-061-1/+1
| | | | | | | | | | Decide work mode for encoder and decoder based on different use-cases. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: helpers, hfi, vdec: Set actual plane constraints to FWDikshita Agarwal2021-04-061-0/+4
| | | | | | | | | | | | | | Set actual plane alignments to FW with HFI_PROPERTY_PARAM_UNCOMPRESSED_PLANE_ACTUAL_CONSTRAINTS_INFO to calculate correct buffer size. bod: Fixed fall-through error in pkt_session_set_property_6xx() switch Ensure setting format constraints on 6xx only Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locationsBryan O'Donoghue2021-04-061-3/+3
| | | | | | | | | | | | | In various places in the venus codebase we have if (IS_V4()) which takes the code down paths for 4xx silicon. This logic is broadly applicable to 6xx silicon also. In this patch we add IS_V6() to various IS_V4() decision locations. Co-developed-by: Dikshita Agarwal <dikshita@qti.qualcomm.com> Signed-off-by: Dikshita Agarwal <dikshita@qti.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Add support for conceal controlStanimir Varbanov2021-04-061-1/+10
| | | | | | | Adds support for decoder conceal color control. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Add support for display delay and delay enable controlsStanimir Varbanov2021-03-221-1/+9
| | | | | | | | | | Add support for display delay and display delay enable std controls. With this we implement decoder decode output order (decode vs display). Once firmware implement few new features the controls will be used for other use-cases. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec,core: Handle picture structure eventStanimir Varbanov2021-01-131-0/+4
| | | | | | | | Handle progressive/interlaced bitstream event by similar way as bit depth. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: Create hfi platform and move vpp/vsp thereStanimir Varbanov2021-01-131-5/+1
| | | | | | | | | Introduce a new hfi platform to cover differences between hfi versions. As a start move vpp/vsp freq data in that hfi platform, more platform data will come later. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: hfi: Correct session init return errorStanimir Varbanov2021-01-131-1/+1
| | | | | | | | | | | | The hfi_session_init can be called many times and it returns EINVAL when the session was already initialized. This error code (EINVAL) is confusing for the callers. Change hfi_session_init to return EALREADY error code when the session has been already initialized. Tested-by: Fritz Koenig <frkoenig@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Handle DRC after drainFritz Koenig2021-01-131-2/+12
| | | | | | | | | | | | | If the DRC is near the end of the stream the client may send a V4L2_DEC_CMD_STOP before the DRC occurs. V4L2_DEC_CMD_STOP puts the driver into the VENUS_DEC_STATE_DRAIN state. DRC must be aware so that after the DRC event the state can be restored correctly. Signed-off-by: Fritz Koenig <frkoenig@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: preserve DRC state across seeksAlexandre Courbot2021-01-121-2/+9
| | | | | | | | | | | | | | | DRC events can happen virtually at anytime, including when we are starting a seek. Should this happen, we must make sure to return to the DRC state, otherwise the firmware will expect buffers of the new resolution whereas userspace will still work with the old one. Returning to the DRC state upon resume for seeking makes sure that the client will get the DRC event and will reallocate the buffers to fit the firmware's expectations. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: helpers: Lock outside of buffer queue helperStanimir Varbanov2021-01-121-2/+1
| | | | | | | | | | After adding more logic in vdec buf_queue vb2 op it is not practical to have two lock/unlock for one decoder buf_queue. So move the instance lock in encoder and decoder vb2 buf_queue operations. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Make decoder return LAST flag for sufficient eventStanimir Varbanov2021-01-121-14/+28
| | | | | | | | | | This makes the decoder to behaives equally for sufficient and insufficient events. After this change the LAST buffer flag will be set when the new resolution (in dynamic-resolution-change state) is smaller then the old bitstream resolution. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Fix non reliable setting of LAST flagStanimir Varbanov2021-01-121-20/+25
| | | | | | | | | | | | In real use of dynamic-resolution-change it is observed that the LAST buffer flag (which marks the last decoded buffer with the resolution before the resolution-change event) is not reliably set. Fix this by set the LAST buffer flag on next queued capture buffer after the resolution-change event. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: use contig vb2 opsAlexandre Courbot2021-01-121-3/+3
| | | | | | | | | | | | | | This driver uses the SG vb2 ops, but effectively only ever accesses the first entry of the SG table, indicating that it expects a flat layout. Switch it to use the contiguous ops to make sure this expected invariant is always enforced. Since the device is supposed to be behind an IOMMU this should have little to none practical consequences beyond making the driver not rely on a particular behavior of the SG implementation. Reported-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: return parsed crop information from streamAlexandre Courbot2020-11-161-5/+27
| | | | | | | | | | | | | | | | Per the stateful codec specification, VIDIOC_G_SELECTION with a target of V4L2_SEL_TGT_COMPOSE is supposed to return the crop area of capture buffers containing the decoded frame. Until now the driver did not get that information from the firmware and just returned the dimensions of CAPTURE buffers. The firmware unfortunately does not always provide the crop information from the stream ; also make sure to detect when that happens and fallback to providing the coded size in these cases. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: Make debug infrastructure more flexibleStanimir Varbanov2020-09-011-3/+3
| | | | | | | | | | | | | | | | | Here we introduce debug prefixes for dev_dbg groups by level of importance - Venus{Low,Med,High,FW} Enabling the particular level will be done by dynamic debug. For example to enable debug messages with low level: echo 'format "VenusLow" +p' > debugfs/dynamic_debug/control If you want to enable all levels: echo 'format "Venus" +p' > debugfs/dynamic_debug/control All the features which dynamic debugging provide are preserved. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: fixes for list corruptionVikash Garodia2020-09-011-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are few list handling issues while adding and deleting node in the registered buf list in the driver. 1. list addition - buffer added into the list during buf_init while not deleted during cleanup. 2. list deletion - In capture streamoff, the list was reinitialized. As a result, if any node was present in the list, it would lead to issue while cleaning up that node during buf_cleanup. Corresponding call traces below: [ 165.751014] Call trace: [ 165.753541] __list_add_valid+0x58/0x88 [ 165.757532] venus_helper_vb2_buf_init+0x74/0xa8 [venus_core] [ 165.763450] vdec_buf_init+0x34/0xb4 [venus_dec] [ 165.768271] __buf_prepare+0x598/0x8a0 [videobuf2_common] [ 165.773820] vb2_core_qbuf+0xb4/0x334 [videobuf2_common] [ 165.779298] vb2_qbuf+0x78/0xb8 [videobuf2_v4l2] [ 165.784053] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem] [ 165.789067] v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem] [ 165.794624] v4l_qbuf+0x48/0x58 [ 1797.556001] Call trace: [ 1797.558516] __list_del_entry_valid+0x88/0x9c [ 1797.562989] vdec_buf_cleanup+0x54/0x228 [venus_dec] [ 1797.568088] __buf_prepare+0x270/0x8a0 [videobuf2_common] [ 1797.573625] vb2_core_qbuf+0xb4/0x338 [videobuf2_common] [ 1797.579082] vb2_qbuf+0x78/0xb8 [videobuf2_v4l2] [ 1797.583830] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem] [ 1797.588843] v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem] [ 1797.594389] v4l_qbuf+0x48/0x58 Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> Reviewed-by: Fritz Koenig <frkoenig@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-08-291-1/+1
| | | | | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: media/platform: drop vb2_queue_release()Hans Verkuil2020-08-281-7/+1
| | | | | | | | | | | | | | | This is only needed for drivers that do not use vb2_fop_release(). Note that vb2_queue_release() is *not* the counterpart of vb2_queue_init() as some drivers here seem to think. Also use vb2_video_unregister_device() to automatically stop streaming at unregister time for those drivers that set vdev->queue. Note that sun4i-csi didn't unregister the video device at all. That's now fixed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: venc,vdec: Return EBUSY on S_FMT while streamingStanimir Varbanov2020-05-051-0/+8
| | | | | | | | | According to the v4l spec s_fmt must return EBUSY while the particular queue is streaming. Add such check in encoder and decoder s_fmt methods. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: Mark last capture bufferStanimir Varbanov2020-05-051-5/+40
| | | | | | | | | | | | | | | | | | | | | | | According to stateful Codec API the decoder will process all remaining buffers from before the source change event in dynamic-resolution-change state and mark the last buffer with V4L2_BUF_FLAG_LAST. In Venus case the firmware doesn't mark that last buffer and some mechanism have to be created in v4l decoder driver. Fortunately the firmware interface (HFI) claims that the decoder output buffers will be returned to v4l decoder driver before it send the insufficient event. In order to do that we save last queued in the driver capture buffer in the event_notify and issue flush on output firmware buffers queue. Once the saved buffer is returned (as a result of flush command) we mark it as LAST. For all that possible we extend HFI flush command with one more argument and one more flush_done HFI driver callback. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Init registered list unconditionallyStanimir Varbanov2020-05-051-2/+3
| | | | | | | | | | | Presently the list initialization is done only in dynamic-resolution-change state, which leads to list corruptions and use-after-free. Init list_head unconditionally in vdec_stop_capture called by vb2 stop_streaming without takeing into account current codec state. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Mark flushed buffers with error stateStanimir Varbanov2020-05-051-0/+3
| | | | | | | | | | | | Once the hfi_session_flush is issued by the vdec all queued buffers to firmware should be returned to the v4l driver. Some of those buffers are not processed at the time of flush command, those buffers has filled len zero (no data). Catch that in buffer_done callback and mark not filled capture buffers with error state so that client can discard them. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: helpers: Done buffers per queue typeStanimir Varbanov2020-05-051-3/+2
| | | | | | | | | | | | Currently calling venus_helper_buffers_done() will return buffers to user for both capture and output queues in the same call. This is wrong because both queues are really separate and calling stop_streaming on one queue shouldn't return buffers for the other. Solve this by add a new queue type argument and fix the clients of the helper function. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Use pmruntime autosuspendStanimir Varbanov2020-04-141-20/+114
| | | | | | | | | | | | Implement pmruntime autosuspend in video decoder. This will allow to save power while the userspace is inactive for some reasonable period of time. Here we power-off venus core clocks and power domain and don't touch vcodec because it is under hardware control. The later decision is made to simplify the code and avoid a mess in the power management code. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: Fix forgotten mutex unlock in start streamingStanimir Varbanov2020-03-121-1/+1
| | | | | | | | | | | | | | | This fixes the following smatch warning in the error path: drivers/media/platform/qcom/venus/vdec.c:968 vdec_start_streaming() warn: inconsistent returns 'mutex:&inst->lock'. Locked on: line 952 Unlocked on: line 963 line 968 by goto mutex unlock. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: vdec: handle 10bit bitstreamsAniket Masule2020-02-271-0/+4
| | | | | | | | | | | | | | | Handle 10bit video streams in the decoder by using dithering, i.e the decoder output buffers will be in 8bit format. The runtime handling is implemented by sending v4l2 event to userspace application, then the application should stop the streaming on capture queue and initiate format negotiation, and start streaming again. Signed-off-by: Aniket Masule <amasule@codeaurora.org> Co-developed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: introduce core selectionAniket Masule2020-02-271-4/+7
| | | | | | | | | | | | | Presently the core (vcodec pipelines) assignment is static. Here we introduce dynamic load balancing across the cores depending on the current session load. The load on earch core is calculated and core with minimum load is assigned to given instance. This will be applicable on Venus v4 with more than one vcodec cores. Signed-off-by: Aniket Masule <amasule@codeaurora.org> Co-developed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: redesign clocks and pm domains controlStanimir Varbanov2020-02-271-49/+20
| | | | | | | | | | | | Redesign core (vcodec) clock control to give the venus core more freedom to control them in order to make possible to use core selection feature on Venus IP v4. Move all clock and pmdomain functions in separate file and abstract power control with common operations per Venus IP version. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: media/platform: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil2020-02-241-1/+1
| | | | | | | | | 'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: venus: remove invalid compat_ioctl32 handlerArnd Bergmann2019-11-091-3/+0
| | | | | | | | | | | | | | | | | v4l2_compat_ioctl32() is the function that calls into v4l2_file_operations->compat_ioctl32(), so setting that back to the same function leads to a trivial endless loop, followed by a kernel stack overrun. Remove the incorrect assignment. Cc: stable@vger.kernel.org Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files") Fixes: aaaa93eda64b ("[media] media: venus: venc: add video encoder files") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: venus: Update clock scalingAniket Masule2019-10-041-2/+2
| | | | | | | | | | | Current clock scaling calculations are same for vpu4 and previous versions. For vpu4, Clock scaling calculations are updated with cycles/mb and bitrate. This helps in getting precise clock required. Signed-off-by: Aniket Masule <amasule@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: venus: Add codec data tableAniket Masule2019-10-041-0/+4
| | | | | | | | | | | | Add vpp cycles for different types of codec. It indicates the cycles required by video hardware to process each macroblock. Add vsp cycles, cycles required by stream processor. Initialize the codec data with core resources. Signed-off-by: Aniket Masule <amasule@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: venus: vdec: flag OUTPUT formats with V4L2_FMT_FLAG_DYN_RESOLUTIONMaxime Jourdan2019-08-191-0/+11
| | | | | | | | | | | Tag all the coded formats where the venus vdec supports dynamic resolution switching. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: venus: dec: populate properly timestamps and flags for capture buffersStanimir Varbanov2019-08-051-0/+2
| | | | | | | | | | | Cache flags, timestamps and timecode structure of OUTPUT buffers in per-instance structure array and fill correctly the same when the CAPTURE buffers are done. This will make v4l2-compliance decoder streaming test happy. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: venus: make decoder compliant with stateful codec APIStanimir Varbanov2019-08-051-115/+404
| | | | | | | | | | | | | This refactors code for start/stop streaming vb2 operations and adds a state machine handling similar to the one in stateful codec API documentation. One major change is that now the HFI session is started on STREAMON(OUTPUT) and stopped on REQBUF(OUTPUT,count=0), during that time STREAMOFF(CAP,OUT) just flush buffers but doesn't stop the session. The other major change is that now the capture and output queues are completely separated. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: venus: vdec: allow bigger sizeimage set by clientsStanimir Varbanov2019-08-051-5/+11
| | | | | | | | | | In most of the cases the client will know better what could be the maximum size for compressed data buffers. Change the driver to permit the user to set bigger size for the compressed buffer but make reasonable sanitation. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* Merge tag 'v5.2-rc4' into media/masterMauro Carvalho Chehab2019-06-111-10/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some conflicts due to SPDX changes. We also have more patches being merged via media tree touching them. So, let's merge back from upstream and address those. Linux 5.2-rc4 * tag 'v5.2-rc4': (767 commits) Linux 5.2-rc4 MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ... Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2025-12-18 10:20:13 +0000