summaryrefslogtreecommitdiffstats
path: root/drivers/phy/qualcomm/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* phy: qcom: Introduce new eDP PHY driverBjorn Andersson2021-11-231-0/+10
| | | | | | | | | | | | | | | | | | | | | Many recent Qualcomm platforms comes with native DP and eDP support. This consists of a controller in the MDSS and a QMP-like PHY. While similar to the well known QMP block, the eDP PHY only has TX lanes and the programming sequences are slightly different. Rather than continuing the trend of parameterize the QMP driver to pieces, this introduces the support as a new driver. The registration of link and pixel clocks are borrowed from the QMP driver. The non-DP link frequencies are omitted for now. The eDP PHY is very similar to the dedicated (non-USB) DP PHY, but only the prior is supported for now. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211103234410.1352424-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependencyBryan O'Donoghue2020-11-161-1/+1
| | | | | | | | | This Kconfig entry should declare a dependency on OF Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20201113151225.1657600-3-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: qualcomm: usb: Fix SuperSpeed PHY OF dependencyBryan O'Donoghue2020-11-161-1/+1
| | | | | | | | | | | This Kconfig entry should declare a dependency on OF Fixes: 6076967a500c ("phy: qualcomm: usb: Add SuperSpeed PHY driver") Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.org/lkml/2020/11/13/414 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20201113151225.1657600-2-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: qualcomm: add qcom ipq806x dwc usb phy driverAnsuel Smith2020-07-201-0/+10
| | | | | | | | | | | | This has lost in the original push for the dwc3 qcom driver. This is needed for ipq806x SoC as without this the usb ports doesn't work at all. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: qcom: remove ufs qmp phy driverVinod Koul2020-07-081-24/+0
| | | | | | | | | | | The UFS specific QMP PHY driver started off supporting the 14nm and 20nm hardware. With the 20nm support marked broken for a long time and the 14nm support added to the common QMP PHY, this driver has not been used in a while. So delete it Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200629145452.123035-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCsWesley Cheng2020-05-051-0/+10
| | | | | | | | | | | | | | | This adds the SNPS FemtoPHY V2 driver used in QCOM SOCs. There are potentially multiple instances of this UTMI PHY on the SOC, all which can utilize this driver. The V2 driver will have a different register map compared to V1. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Philipp Zabel <pza@pengutronix.de> Reviewed-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/1588636467-23409-3-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: add driver for Qualcomm IPQ40xx USB PHYRobert Marko2020-05-041-0/+7
| | | | | | | | | | | Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs. The driver sets up HS and SS phys. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: qualcomm: usb: Add SuperSpeed PHY driverJorge Ramirez-Ortiz2020-03-201-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Controls Qualcomm's SS PHY 1.0.0 implemented on various SoCs on both the 20nm and 28nm process nodes. Based on Sriharsha Allenki's <sallenki@codeaurora.org> original code. [bod: Removed dependency on extcon. Switched to gpio-usb-conn to handle VBUS On/Off Switched to usb-role-switch to bind gpio-usb-conn to DWC3] Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Cc: Sriharsha Allenki's <sallenki@codeaurora.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driverShawn Guo2020-03-201-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds Qualcomm 28nm Hi-Speed USB PHY driver support. This PHY is usually paired with Synopsys DWC3 USB controllers on Qualcomm SoCs. The PHY can come in two flavours femtoPHY or picoPHY. This commit adds support for the femtoPHY with the possibility of extending to the picoPHY with additional future commits. Both PHYs are on a 28 nanometer process node. [bod: Updated qcom_snps_hsphy_set_mode to match new method signature Added disjunct on mode > 0 Removed regulator_set_voltage() in favour of setting floor in dts Removed 'snps' and from driver name Extended commit log to mention femtoPHY and picoPHY for future reference.] Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'phy-for-5.3' of ↵Greg Kroah-Hartman2019-07-011-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next phy: for 5.3 *) Add a new PHY driver for Qualcomm PCIe2 PHY *) Add a new PHY driver for Mixel DPHY present in i.MX8 *) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that PHY enable failed *) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to calling a sleeping function from invalid context *) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to imbalance powered flag *) Fix .cocci and sparse warnings Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delay phy: meson-g12a-usb3-pcie: disable locking for cr_regmap phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs dt-bindings: phy: Add documentation for mixel dphy dt-bindings: phy-pxa-usb: add bindings phy: renesas: rcar-gen3-usb2: fix imbalance powered flag phy: qcom-qmp: Drop useless msm8998_pciephy_cfg setting phy: qcom-qmp: Correct READY_STATUS poll break condition phy: ti: am654-serdes: Make serdes_am654_xlate() static phy: usb: phy-brcm-usb: Fix platform_no_drv_owner.cocci warnings phy: samsung: Use struct_size() in devm_kzalloc() phy: qcom: Add Qualcomm PCIe2 PHY driver dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY
| * phy: qcom: Add Qualcomm PCIe2 PHY driverBjorn Andersson2019-05-311-0/+8
| | | | | | | | | | | | | | | | | | The Qualcomm PCIe2 PHY is based on design from Synopsys and found in several different platforms where the QMP PHY isn't used. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
|/ | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* phy: qcom-ufs: Declare 20nm qcom ufs qmp phy as BrokenVivek Gautam2018-09-261-0/+17
| | | | | | | | Fork out separate configs for 14nm and 20nm qcom ufs qmp phys to declare the 20nm phy as broken. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Add a driver for the ATH79 USB phyAlban Bedel2018-04-251-1/+10
| | | | | | | | | | | | | The ATH79 USB phy is very simple, it only have a reset. On some SoC a second reset is used to force the phy in suspend mode regardless of the USB controller status. This driver is added to the qualcom directory as atheros is now part of qualcom and newer SoC of this familly are marketed under the qualcom name. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Group vendor specific phy driversVivek Gautam2017-06-011-0/+58
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-07 06:47:42 +0000