summaryrefslogtreecommitdiffstats
path: root/drivers/usb/typec
Commit message (Collapse)AuthorAgeFilesLines
* usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMICAndy Shevchenko2022-06-211-1/+0
| | | | | | | | | | | | | | | | | | | Intel SoC PMIC is a generic name for all PMICs that are used on Intel platforms. In particular, INTEL_SOC_PMIC kernel configuration option refers to Crystal Cove PMIC, which has never been a part of any Intel Broxton hardware. Drop wrong dependency from Kconfig. Note, the correct dependency is satisfied via ACPI PMIC OpRegion driver, which the Type-C depends on. Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY") Reported-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220620104316.57592-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'char-misc-5.19-rc1' of ↵Linus Torvalds2022-06-031-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / other smaller driver subsystem updates from Greg KH: "Here is the large set of char, misc, and other driver subsystem updates for 5.19-rc1. The merge request for this has been delayed as I wanted to get lots of linux-next testing due to some late arrivals of changes for the habannalabs driver. Highlights of this merge are: - habanalabs driver updates for new hardware types and fixes and other updates - IIO driver tree merge which includes loads of new IIO drivers and cleanups and additions - PHY driver tree merge with new drivers and small updates to existing ones - interconnect driver tree merge with fixes and updates - soundwire driver tree merge with some small fixes - coresight driver tree merge with small fixes and updates - mhi bus driver tree merge with lots of updates and new device support - firmware driver updates - fpga driver updates - lkdtm driver updates (with a merge conflict, more on that below) - extcon driver tree merge with small updates - lots of other tiny driver updates and fixes and cleanups, full details in the shortlog. All of these have been in linux-next for almost 2 weeks with no reported problems" * tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits) habanalabs: use separate structure info for each error collect data habanalabs: fix missing handle shift during mmap habanalabs: remove hdev from hl_ctx_get args habanalabs: do MMU prefetch as deferred work habanalabs: order memory manager messages habanalabs: return -EFAULT on copy_to_user error habanalabs: use NULL for eventfd habanalabs: update firmware header habanalabs: add support for notification via eventfd habanalabs: add topic to memory manager buffer habanalabs: handle race in driver fini habanalabs: add device memory scrub ability through debugfs habanalabs: use unified memory manager for CB flow habanalabs: unified memory manager new code for CB flow habanalabs/gaudi: set arbitration timeout to a high value habanalabs: add put by handle method to memory manager habanalabs: hide memory manager page shift habanalabs: Add separate poll interval value for protocol habanalabs: use get_task_pid() to take PID habanalabs: add prefetch flag to the MAP operation ...
| * extcon: Fix extcon_get_extcon_dev() error handlingDan Carpenter2022-05-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The extcon_get_extcon_dev() function returns error pointers on error, NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV) when the CONFIG_EXTCON option is disabled. This is very complicated for the callers to handle and a number of them had bugs that would lead to an Oops. In real life, there are two things which prevented crashes. First, error pointers would only be returned if there was bug in the caller where they passed a NULL "extcon_name" and none of them do that. Second, only two out of the eight drivers will build when CONFIG_EXTCON is disabled. The normal way to write this would be to return -EPROBE_DEFER directly when appropriate and return NULL when CONFIG_EXTCON is disabled. Then the error handling is simple and just looks like: dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev)); if (IS_ERR(dev->edev)) return PTR_ERR(dev->edev); For the two drivers which can build with CONFIG_EXTCON disabled, then extcon_get_extcon_dev() will now return NULL which is not treated as an error and the probe will continue successfully. Those two drivers are "typec_fusb302" and "max8997-battery". In the original code, the typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but now that function is a no-op. For the max8997-battery driver everything should continue working as is. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds2022-06-0311-144/+530
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
| * | Merge 5.18-rc5 into usb-nextGreg Kroah-Hartman2022-05-032-7/+18
| |\| | | | | | | | | | | | | | | | | | | | | | We need the USB fixes in here, and this resolves a merge issue in drivers/usb/dwc3/drd.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: mux: Add On Semi fsa4480 driverBjorn Andersson2022-04-263-0/+229
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with support for analog audio headsets. It allows sharing a common USB Type-C port to pass USB2.0 signal, analog audio, sideband use wires and analog microphone signal. Due to lacking upstream audio support for testing, the audio muxing is left untouched, but implementation of muxing the SBU lines is provided as a pair of Type-C mux and switch devices. This provides the necessary support for enabling the DisplayPort altmode on devices with this circuit. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220422222351.1297276-8-bjorn.andersson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: mux: Allow multiple mux_devs per muxBjorn Andersson2022-04-261-26/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Qualcomm platforms the USB/DP PHY handles muxing and orientation switching of the SuperSpeed lines, but the SBU lines needs to be connected and switched by external (to the SoC) hardware. It's therefor necessary to be able to have the TypeC controller operate multiple TypeC muxes and switches. Use the newly introduced indirection object to handle this, to avoid having to taint the TypeC controllers with knowledge about the downstream hardware configuration. The max number of devs per indirection is set to 3, which account for being able to mux/switch the USB HS, SS and SBU lines, as per defined defined in the usb-c-connector binding. This number could be grown if need arrises at a later point in time. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220422222351.1297276-6-bjorn.andersson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: mux: Introduce indirectionBjorn Andersson2022-04-265-87/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than directly exposing the implementation's representation of the typec muxes to the controller/clients, introduce an indirection object. This enables the introduction of turning this relationship into a one-to-many in the following patch. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220422222351.1297276-5-bjorn.andersson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: mux: Check dev_set_name() return valueBjorn Andersson2022-04-261-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's possible that dev_set_name() returns -ENOMEM, catch and handle this. Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220422222351.1297276-4-bjorn.andersson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: ucsi: Wait for the USB role switchesLinyu Yuan2022-04-262-13/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When role switch module probe late than ucsi module, fwnode_usb_role_switch_get() will return -EPROBE_DEFER, it is better to restart ucsi init work to find it again every 100ms, total wait time is 10 second. It also means change ucsi init work to delayed_work. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1650881886-25530-3-git-send-email-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: ucsi: add a common function ucsi_unregister_connectors()Linyu Yuan2022-04-261-24/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In error path of ucsi_init(), it will unregister all valid ucsi connectors, and similar operation also happen in ucsi_unregister(), add a common function ucsi_unregister_connectors() for two places, inside this function, if con->wq is NULL, it will break the loop, if other kind of error happen after con->wq allocated, ucsi/typec related API is safe to unregister. Also in ucsi_init(), it allocate number of (ucsi->cap.num_connectors + 1) connectors, there is one extra as the ending, ucsi_unregister_connectors() is safe to unregister all ucsi connectors according ucsi->cap.num_connectors, remove the extra one connector to save memory. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1650881886-25530-2-git-send-email-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: tipd: Only update power status on IRQGuido Günther2022-04-211-20/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of refetching power status cache it and only update it when a change is signalled via irq. This simplifies tracing and adding more supply properties in follow up patches. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220317154518.4082046-2-sebastian.krzyszkowiak@puri.sm Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: mux: intel_pmc_mux: Add retry logic to a PMC commandTanveer Alam2022-04-211-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are few scenerio when PMC reports 'busy condition' and command fail. If PMC receives a high priority command while servicing a low priority command then it discards the low priority command and start servicing the high priority command. The lower priority command fail and driver returns error. If the same command resend to the PMC then PMC latches the command and service it accordingly. Thus adds the retry logic for the PMC command. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tanveer Alam <tanveer1.alam@intel.com> Link: https://lore.kernel.org/r/20220328105137.6223-1-tanveer1.alam@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | |
| \ \
*-. \ \ Merge branches 'acpi-glue', 'acpi-osl', 'acpi-processor' and 'acpi-cppc'Rafael J. Wysocki2022-05-301-17/+6
|\ \ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge general ACPI cleanups and processor support updates for 5.19-rc1: - Rearrange find_child_checks() to simplify code (Rafael Wysocki). - Use memremap() to map the UCSI mailbox that is always in main memory and drop acpi_release_memory() that has no more users (Heikki Krogerus, Dan Carpenter). - Make max_cstate/nocst/bm_check_disable processor module parameters visible in sysfs (Yajun Deng). - Fix typo in the CPPC driver (Julia Lawall). * acpi-glue: ACPI: glue: Rearrange find_child_checks() * acpi-osl: usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe ACPI: OSL: Remove the helper for deactivating memory region usb: typec: ucsi: acpi: Map the mailbox with memremap() * acpi-processor: ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs * acpi-cppc: ACPI: CPPC: fix typo in comment
| | * | usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probeDan Carpenter2022-05-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The devm_memremap() function never returns NULL. It returns error pointers. Fixes: cdc3d2abf438 ("usb: typec: ucsi: acpi: Map the mailbox with memremap()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | usb: typec: ucsi: acpi: Map the mailbox with memremap()Heikki Krogerus2022-04-271-15/+4
| | |/ | | | | | | | | | | | | | | | | | | | | | The UCSI mailbox is always in main memory. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | usb: typec: tcpci_mt6360: Update for BMC PHY settingChiYuan Huang2022-05-121-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update MT6360 BMC PHY Tx/Rx setting for the compatibility. Macpaul reported this CtoDP cable attention message cannot be received from MT6360 TCPC. But actually, attention message really sent from UFP_D device. After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue. Below's the detailed TCPM log and DP attention message didn't received from 6360 TCPCI. [ 1206.367775] Identity: 0000:0000.0000 [ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405 [ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start [ 1206.447383] PD TX, header: 0x1d6f [ 1206.449393] PD TX complete, status: 0 [ 1206.454110] PD RX, header: 0x184f [1] [ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1 [ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished [ 1206.456873] cc:=4 [ 1206.473100] AMS STRUCTURED_VDMS start [ 1206.473103] PD TX, header: 0x2f6f [ 1206.475397] PD TX complete, status: 0 [ 1206.480442] PD RX, header: 0x2a4f [1] [ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2 [ 1206.483150] AMS STRUCTURED_VDMS finished [ 1206.483151] cc:=4 [ 1206.505643] AMS STRUCTURED_VDMS start [ 1206.505646] PD TX, header: 0x216f [ 1206.507933] PD TX complete, status: 0 [ 1206.512664] PD RX, header: 0x1c4f [1] [ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1 [ 1206.515460] AMS STRUCTURED_VDMS finished [ 1206.515461] cc:=4 Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver") Cc: stable <stable@vger.kernel.org> Reported-by: Macpaul Lin <macpaul.lin@mediatek.com> Tested-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/1652159580-30959-1-git-send-email-u0084500@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: typec: tcpci: Don't skip cleanup in .remove() on errorUwe Kleine-König2022-05-051-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Returning an error value in an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. In this case the remove callback even returns early without stopping the tcpm worker thread and various timers. A work scheduled on the work queue, or a firing timer after tcpci_remove() returned probably results in a use-after-free situation because the regmap and driver data were freed. So better make sure that tcpci_unregister_port() is called even if disabling the irq failed. Also emit a more specific error message instead of the i2c core's "remove failed (EIO), will be ignored" and return 0 to suppress the core's warning. This patch is (also) a preparation for making i2c remove callbacks return void. Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLYRen Zhijie2022-04-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/rt1719.o: In function `rt1719_psy_set_property': rt1719.c:(.text+0x10a): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `rt1719_psy_get_property': rt1719.c:(.text+0x2c8): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `devm_rt1719_psy_register': rt1719.c:(.text+0x3e9): undefined reference to `devm_power_supply_register' drivers/usb/typec/rt1719.o: In function `rt1719_irq_handler': rt1719.c:(.text+0xf9f): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_update_pwr_opmode.part.9': rt1719.c:(.text+0x657): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_attach': rt1719.c:(.text+0x83e): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: 25d29b980912 ("usb: typec: rt1719: Add support for Richtek RT1719") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Link: https://lore.kernel.org/r/20220418082425.41566-1-renzhijie2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: ucsi: Fix role swappingHeikki Krogerus2022-04-211-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All attempts to swap the roles timed out because the completion was done without releasing the port lock. Fixing that by releasing the lock before starting to wait for the completion. Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/ Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: stable@vger.kernel.org Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: ucsi: Fix reuse of completion structureHeikki Krogerus2022-04-211-0/+4
|/ | | | | | | | | | | | | | | The role swapping completion variable is reused, so it needs to be reinitialised every time. Otherwise it will be marked as done after the first time it's used and completing immediately. Link: https://lore.kernel.org/linux-usb/20220325203959.GA19752@jackp-linux.qualcomm.com/ Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations") Cc: stable@vger.kernel.org Reported-and-suggested-by: Jack Pham <quic_jackp@quicinc.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220405134824.68067-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-5.18-rc1' of ↵Linus Torvalds2022-03-268-23/+1472
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ...
| * usb: typec: tipd: Forward plug orientation to typec subsystemSven Peter2022-03-032-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | In order to bring up the USB3 PHY on the Apple M1 we need to know the orientation of the Type-C cable. Extract it from the status register and forward it to the typec subsystem. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220226125912.59828-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge 5.17-rc6 into usb-nextGreg Kroah-Hartman2022-02-281-3/+4
| |\ | | | | | | | | | | | | | | | | | | We need the USB fixes in here, and it resolves a merge conflict in: drivers/usb/dwc3/dwc3-pci.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: Support the WUSB3801 port controllerSamuel Holland2022-02-173-0/+448
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WUSB3801 features a configurable port type, accessory detection, and plug orientation detection. It provides a hardware "ID" pin output for compatibility with USB 2.0 OTG PHYs. Add a typec class driver for it. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220214050118.61015-5-samuel@sholland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: Factor out non-PD fwnode propertiesSamuel Holland2022-02-172-23/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basic programmable non-PD Type-C port controllers do not need the full TCPM library, but they share the same devicetree binding and the same typec_capability structure. Factor out a helper for parsing those properties which map to fields in struct typec_capability, so the code can be shared between TCPM and basic non-TCPM drivers. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220214050118.61015-4-samuel@sholland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: rt1719: Add support for Richtek RT1719ChiYuan Huang2022-02-113-0/+974
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Richtek RT1719 is a sink-only Type-C PD controller it complies with latest USB Type-C and PD standards. It integrates the physical layer of USB power delivery protocol to allow up to 100W of power. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1644421362-32104-3-git-send-email-u0084500@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | ACPI: bus: Introduce acpi_bus_for_each_dev()Rafael J. Wysocki2022-03-021-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | In order to avoid exposing acpi_bus_type to modules, introduce an acpi_bus_for_each_dev() helper for iterating over all ACPI device objects and make typec_link_ports() use it instead of the raw bus_for_each_dev() along with acpi_bus_type. Having done that, drop the acpi_bus_type export. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
* | tps6598x: clear int mask on probe failureJens Axboe2022-02-171-3/+4
|/ | | | | | | | | | | | | | | | | The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter <sven@svenpeter.dev> Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ucsi_ccg: Check DEV_INT bit only when starting CCG4Sing-Han Chen2022-01-261-1/+1
| | | | | | | | | | | | | | | | | | | CCGx clears Bit 0:Device Interrupt in the INTR_REG if CCGx is reset successfully. However, there might be a chance that other bits in INTR_REG are not cleared due to internal data queued in PPM. This case misleads the driver that CCGx reset failed. The commit checks bit 0 in INTR_REG and ignores other bits. The ucsi driver would reset PPM later. Fixes: 247c554a14aa ("usb: typec: ucsi: add support for Cypress CCGx") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sing-Han Chen <singhanc@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220112094143.628610-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: typec: tcpm: Do not disconnect when receiving VSAFE0VBadhri Jagan Sridharan2022-01-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V causing VSAFE0V to be triggered. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED state where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid VSAFE0V events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: 28b43d3d746b8 ("usb: typec: tcpm: Introduce vsafe0v for vbus") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20220122015520.332507-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: typec: tcpm: Do not disconnect while receiving VBUS offBadhri Jagan Sridharan2022-01-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V before tcpm gets to read port->tcpc->get_vbus. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20220122015520.332507-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: typec: Don't try to register component master without componentsHeikki Krogerus2022-01-251-0/+2
| | | | | | | | | | | | | This fixes NULL pointer dereference that happens if component master is registered with empty component match list. Fixes: 730b49aac426 ("usb: typec: port-mapper: Convert to the component framework") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220124090228.41396-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: typec: Only attempt to link USB ports if there is fwnodeHeikki Krogerus2022-01-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | The code that creates the links to the USB ports attached to a connector inside the system assumed that the ACPI nodes (fwnodes) always exist for the connectors, but it can not do that. There is no guarantee that every USB Type-C connector has ACPI device node representing it in the ACPI tables, and even if there are the nodes in the ACPI tables, the _STA method in those nodes may still return 0 (which means the device does not exist from ACPI PoW). This fixes NULL pointer dereference that happens if the nodes are missing. Fixes: 730b49aac426 ("usb: typec: port-mapper: Convert to the component framework") Reported-and-tested-by: Robert Święcki <robert@swiecki.net> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220124090228.41396-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: typec: tcpci: don't touch CC line if it's Vconn sourceXu Yang2022-01-252-0/+27
| | | | | | | | | | | | | | | | | | | | | | With the AMS and Collision Avoidance, tcpm often needs to change the CC's termination. When one CC line is sourcing Vconn, if we still change its termination, the voltage of the another CC line is likely to be fluctuant and unstable. Therefore, we should verify whether a CC line is sourcing Vconn before changing its termination and only change the termination that is not a Vconn line. This can be done by reading the Vconn Present bit of POWER_ STATUS register. To determine the polarity, we can read the Plug Orientation bit of TCPC_CONTROL register. Since Vconn can only be sourced if Plug Orientation is set. Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance") cc: <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220113092943.752372-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 5.16-rc8 into usb-nextGreg Kroah-Hartman2022-01-031-1/+3
|\ | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: typec: ucsi: Only check the contract if there is a connectionHeikki Krogerus2021-12-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver must make sure there is an actual connection before checking details about the USB Power Delivery contract. Those details are not valid unless there is a connection. This fixes NULL pointer dereference that is caused by an attempt to register bogus partner alternate mode that the firmware on some platform may report before the actual connection. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215117 Fixes: 6cbe4b2d5a3f ("usb: typec: ucsi: Check the partner alt modes always if there is PD contract") Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/eb34f98f-00ef-3238-2daa-80481116035d@leemhuis.info/ Link: https://lore.kernel.org/r/20211221140352.45501-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: port-mapper: Convert to the component frameworkHeikki Krogerus2021-12-304-248/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of trying to keep track of the connections to the USB Type-C connectors separately, letting the component framework take care of that. From now on every USB Type-C connector will register itself as "aggregate" - component master - and anything that can be connected to it inside the system can then simply register itself as a generic component. The matching of the components and the connector shall rely on ACPI _PLD initially. Before registering itself as the aggregate, the connector will find all other ACPI devices that have matching _PLD crc hash with it (matching value in the pld_crc member of struct acpi_device), and add a component match entry for each one of them. Because only ACPI is supported for now, the driver shall only be build when ACPI is supported. This removes the need for the custom API that the driver exposed. The components and the connector can therefore exist completely independently of each other. The order in which they are registered, as well as are they modules or not, is now irrelevant. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20211223082422.45637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 5.16-rc6 into usb-nextGreg Kroah-Hartman2021-12-201-5/+13
|\| | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: typec: tcpm: fix tcpm unregister port but leave a pending timerXu Yang2021-12-151-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current design, when the tcpm port is unregisterd, the kthread_worker will be destroyed in the last step. Inside the kthread_destroy_worker(), the worker will flush all the works and wait for them to end. However, if one of the works calls hrtimer_start(), this hrtimer will be pending until timeout even though tcpm port is removed. Once the hrtimer timeout, many strange kernel dumps appear. Thus, we can first complete kthread_destroy_worker(), then cancel all the hrtimers. This will guarantee that no hrtimer is pending at the end. Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") cc: <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20211209101507.499096-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 5.16-rc4 into usb-nextGreg Kroah-Hartman2021-12-061-4/+0
|\| | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnectBadhri Jagan Sridharan2021-12-031-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." This change makes TCPM to wait in SNK_DEBOUNCED state until CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously, TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON. This causes TCPM to loop continuously when connected to a faulty power source that does not present vbus. Waiting in SNK_DEBOUNCED also ensures that TCPM is adherant to "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements. [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6169.931296] disable vbus discharge ret:0 [ 6169.931301] Setting usb_comm capable false [ 6169.932783] Setting voltage/current limit 0 mV 0 mA [ 6169.932802] polarity 0 [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0 [ 6169.936689] cc:=0 [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS] [ 6170.036896] Start toggling [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6170.693304] disable vbus discharge ret:0 [ 6170.693308] Setting usb_comm capable false [ 6170.695193] Setting voltage/current limit 0 mV 0 mA [ 6170.695210] polarity 0 [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0 [ 6170.701896] cc:=0 [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 5.16-rc3 into usb-nextGreg Kroah-Hartman2021-11-292-20/+21
|\| | | | | | | | | | | We need the USB driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: typec: tipd: Fix initialization sequence for cd321xHector Martin2021-11-231-17/+16
| | | | | | | | | | | | | | | | | | | | | | | | The power state switch needs to happen first, as that kickstarts the firmware into normal mode. Fixes: c9c14be664cf ("usb: typec: tipd: Switch CD321X power state to S0") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20211120030717.84287-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: typec: tipd: Fix typo in cd321x_switch_power_stateHector Martin2021-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | SPSS should've been SSPS. Fixes: c9c14be664cf ("usb: typec: tipd: Switch CD321X power state to S0") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20211120030717.84287-2-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: typec: fusb302: Fix masking of comparator and bc_lvl interruptsOndrej Jirman2021-11-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate bit in the mask register. In fact, interrupts are enabled when the mask is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects BC_LVL interrupt to be enabled. This causes inability of the driver to recognize cable unplug events in host mode (unplug is recognized only via a COMP_CHNG interrupt). In device mode this bug was masked by simultaneous triggering of the VBUS change interrupt, because of loss of VBUS when the port peer is providing power. Fixes: 48242e30532b ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"") Cc: stable <stable@vger.kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@megous.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: ucsi: Expose number of alternate modes in partnerSaranya Gopal2021-11-171-1/+15
|/ | | | | | | | | | | | | Type-c class provides an option to expose the number of alternate modes in the port partner as a sysfs interface. Use that to expose the number of alternate modes in the port partner from the ucsi driver. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rajaram Regupathy <rajaram.regupathy@intel.com> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Link: https://lore.kernel.org/r/20211116103613.31349-1-saranya.gopal@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-5.16-rc1' of ↵Linus Torvalds2021-11-049-222/+392
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1. Nothing major in here, just lots of little cleanups and additions for new hardware, all of which have been in linux-next for a while with no reported problems. Included in here are: - tiny Thunderbolt driver updates - USB typec driver updates - USB serial driver updates - USB gadget driver updates - dwc2 and dwc3 controller driver updates - tiny USB host driver updates - minor USB driver fixes and updates - USB dts updates for various platforms" * tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits) usb: gadget: Mark USB_FSL_QE broken on 64-bit usb: gadget: f_mass_storage: Disable eps during disconnect usb: gadget: udc: core: Revise comments for USB ep enable/disable USB: serial: keyspan: fix memleak on probe errors USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send() USB: serial: ch314: use usb_control_msg_recv() USB: iowarrior: fix control-message timeouts Documentation: USB: fix example bulk-message timeout usb: dwc2: stm32mp15: set otg_rev usb: dwc2: add otg_rev and otg_caps information for gadget driver dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml dt-bindings: usb: dwc2: Add reference to usb-drd.yaml usb: gadget: uvc: implement dwPresentationTime and scrSourceClock usb: gadget: uvc: use on returned header len in video_encode_isoc_sg usb:gadget: f_uac1: fixed sync playback Docs: usb: remove :c:func: for usb_register and usb_deregister Docs: usb: update struct usb_driver usb: gadget: configfs: change config attributes file operation usb: gadget: configfs: add cfg_to_gadget_info() helper usb: dwc3: Align DWC3_EP_* flag macros ...
| * usb: typec: tipd: Enable event interrupts by defaultSaranya Gopal2021-10-201-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI PD controller comes with notification mechanism to inform the host on activity in the PD controller. In the current driver, the required masks are not set. This patch enables the following events in the interrupt mask register: PowerStatusUpdate - Set whenever contents of the power status reg changes DataStatusUpdate - Set whenever contents of the data status reg changes PlugInsertOrRemoval - Set whenever USB plug status has changed With this change, the interrupt flooding issue is not seen anymore. Suggested-by: Rajaram Regupathy <rajaram.regupathy@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Datasheet: https://www.ti.com/lit/ug/slvuan1a/slvuan1a.pdf Link: https://lore.kernel.org/r/20211020022620.21012-2-saranya.gopal@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: typec: STUSB160X should select REGMAP_I2CRandy Dunlap2021-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | REGMAP_I2C is not a user visible kconfig symbol so driver configs should not "depend on" it. They should depend on I2C and then select REGMAP_I2C. If this worked, it was only because some other driver had set/enabled REGMAP_I2C. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20211015013609.7300-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-02-23 02:15:57 +0000