summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: max98396: add amplifier driverRyan Lee2022-04-261-0/+2
| | | | | | | | | | | | | This series of patches adds support for Analog Devices MAX98396 mono amplifier with IV sense. The device provides a PCM interface for audio data and a standard I2C interface for control data communication. This driver also supports MAX98397 which is a variant of MAX98396 with wide input supply range. Signed-off-by: Ryan Lee <ryan.lee.analog@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220423021558.1773598-1-ryan.lee.analog@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt1016: enable buildingStephen Kitt2022-04-061-0/+2
| | | | | | | | | | The rt1016 driver wasn't listed in Kconfig and Makefile, which AFAICT means it isn't ever built. This patch adds the appropriate entries to Kconfig and Makefile. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20220405171158.2168762-1-steve@sk2.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: cs35l45: Add driver for Cirrus Logic CS35L45 Smart AmpJames Schulman2022-04-051-0/+8
| | | | | | | | | | | | | The CS35L45 is a 15 V Boosted Mono Class D Amplifier with DSP Speaker Protection and Adaptive Battery Management. This initial driver provides standard non-boosted audio operation without the DSP. Signed-off-by: James Schulman <james.schulman@cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220405135419.1230088-6-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: wm8731: Factor out the I2C and SPI bus code into separate modulesMark Brown2022-04-041-0/+4
| | | | | | | | | | | | Placing both the I2C and SPI code in the same module causes problems with mixes of modular and non-modular builds of the buses so it's generally bad practice. As with other drivers split the bus code out of the WM8731 driver into separate modules. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-6-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: Add Awinic AW8738 audio amplifier driverJonathan Albrieux2022-03-071-0/+2
| | | | | | | | | | | | | | | | | The Awinic AW8738 is a simple audio amplifier using a single GPIO. The main difference to simple-amplifier is that there is a "one-wire pulse control" that allows configuring the amplifier to one of a few pre-defined modes. This can be used to configure the speaker-guard function (primarily the power limit for the amplifier). Add a simple driver that allows setting it up in the device tree with a specified mode number. Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com> Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20220304102452.26856-3-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: Add power domains support in digital macro codecsSrinivasa Rao Mandadapu2022-02-281-0/+2
| | | | | | | | | | | | | | Add support for enabling required power domains in digital macro codecs. macro and dcodec power domains are being requested as clocks by HLOS in ADSP based architectures and ADSP internally handling as powerdomains. In ADSP bypass case need to handle them as power domains explicitly. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/1645898959-11231-2-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: add support for TAS5805M digital amplifierDaniel Beer2022-01-241-0/+2
| | | | | | | | | | | | | The Texas Instruments TAS5805M is a class D audio amplifier with an integrated DSP. DSP configuration is supplied in a firmware image specified through a device-tree attribute. These register writes set up application-specific DSP settings and are expected to be generated using TI's PPC3 tool. Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com> Link: https://lore.kernel.org/r/b82fac1d21a33a5f57a5819eaf37c31f5c86eb65.1642298336.git.daniel.beer@igorinstitute.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: cs35l41: Convert tables to shared source codeLucas Tanure2021-12-311-1/+3
| | | | | | | | | | | | | | | | | | | To support CS35L41 in HDA systems the HDA driver for CS35L41 would have to duplicate some functions that already exist on ASoC driver So instead of duplicate the code, use the new lib source as a shared resource for both ASoC and HDA Also, change the way CONFIG_SND_SOC_CS35L41 is selected, as reported by Intel Kernel test robot, it is possible to build SND_SOC_CS35L41_SPI/I2C without the main driver, which would lead to build failures. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211217115708.882525-2-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Add AK4375 supportVincent Knecht2021-12-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AK4375 is a 32-bit stereo DAC with headphones amplifier. There's no documentation for it on akm.com, and only a brief datasheet can be found floating on the internets [1]. Thanks to Oriane BAYERD <obayerd@eurocomposant.fr> for finally answering my inquiries through akm.com, if only to tell me that this chip is EOL following AKM factory burning in october 2020 and thus no detailed documentation is available anymore... AK4331 is advertised [2] as pin and register compatible with AK4375 so some scraps of its datasheet were used and this driver might be used as a base for it, but this is totally untested. So this driver is mainly based on downstream code [3] and [4] by Hu Jin from AKM (no known email). Tested on msm8916-alcatel-idol347 and msm8939-alcatel-idol3, which both use PLL driven clock with bypass of SRC (sample rate converter), so only this setup is supported for now. [1] https://datasheetspdf.com/pdf-file/1400317/AKM/AK4375A/1 [2] https://www.akm.com/content/dam/documents/products/audio/audio-dac/ak4331ecb/ak4331ecb-en-datasheet.pdf [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/idol347/ak4375.c [4] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/ak4375.c Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20211220193725.2650356-2-vincent.knecht@mailoo.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codec: tlv320adc3xxx: New codec driverRicard Wanderlof2021-12-201-0/+2
| | | | | | | | | New codec driver for Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2112151801370.27889@lap5cg0092dnk.se.axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: cs35l41: Fix link problemLucas Tanure2021-11-261-2/+4
| | | | | | | | | | | | Can't link I2C and SPI to the same binary, better to move CS35L41 to 3 modules approach. And instead of exposing cs35l41_reg, volatile_reg, readable_reg and precious_reg arrays, move cs35l41_regmap_i2c/spi to new module and expose it. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211125143501.7720-1-tanureal@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: max98520: add max98520 audio amplifier driverGeorge Song2021-10-271-0/+2
| | | | | | | | add max98520 audio amplifier driver Signed-off-by: George Song <george.song@maximintegrated.com> Link: https://lore.kernel.org/r/20211027001431.363-2-george.song@maximintegrated.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt9120: Add rt9210 audio amplifier supportChiYuan Huang2021-10-131-0/+2
| | | | | | | | Add Richtek rt9120 audio amplifier support. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1634088519-995-3-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt9120: Drop rt9210 audio amplifier supportMark Brown2021-10-131-2/+0
| | | | | | | This drops the rt9210 support due to a race with a new version being sent out for some incremental changes. Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt9120: Add rt9210 audio amplifier supportChiYuan Huang2021-10-081-0/+2
| | | | | | | | | Add Richtek rt9120 audio amplifier support. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> [Fix a Gain->Volume -- broonie] Message-Id: <1633668612-25524-3-git-send-email-u0084500@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: nau8821: new driverSeven Lee2021-10-021-0/+2
| | | | | | | | | | The driver is for codec NAU88L21 of Nuvoton Technology Corporation. The NAU88L21 is an ultra-low power high performance audio codec that supports both analog and digital audio functions. Signed-off-by: Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20211001103108.3297848-1-wtli@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge series "Cirrus Logic CS35L41 Amplifier" from David Rhodes ↵Mark Brown2021-09-131-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <drhodes@opensource.cirrus.com>: ASoC driver and devicetree documentation for a new Cirrus Logic amplifier CS35L41 v7 changes: Remove property 'classh-bst-max-limit' David Rhodes (2): ASoC: cs35l41: CS35L41 Boosted Smart Amplifier ASoC: cs35l41: Add bindings for CS35L41 .../devicetree/bindings/sound/cs35l41.yaml | 151 ++ include/sound/cs35l41.h | 34 + sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/cs35l41-i2c.c | 114 ++ sound/soc/codecs/cs35l41-spi.c | 143 ++ sound/soc/codecs/cs35l41-tables.c | 597 +++++++ sound/soc/codecs/cs35l41.c | 1545 +++++++++++++++++ sound/soc/codecs/cs35l41.h | 775 +++++++++ 9 files changed, 3375 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs35l41.yaml create mode 100644 include/sound/cs35l41.h create mode 100644 sound/soc/codecs/cs35l41-i2c.c create mode 100644 sound/soc/codecs/cs35l41-spi.c create mode 100644 sound/soc/codecs/cs35l41-tables.c create mode 100644 sound/soc/codecs/cs35l41.c create mode 100644 sound/soc/codecs/cs35l41.h -- 2.25.1
| * ASoC: cs35l41: CS35L41 Boosted Smart AmplifierDavid Rhodes2021-09-131-0/+4
| | | | | | | | | | | | | | | | | | SoC Audio driver for the Cirrus Logic CS35L41 amplifier Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210907225719.2018115-2-drhodes@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: rt5682s: Add driver for ALC5682I-VS codecDerek Fang2021-09-131-0/+2
|/ | | | | | | | | This is an initial codec driver for Realtek ALC5682I-VS codec. Signed-off-by: Derek Fang <derek.fang@realtek.com> Signed-off-by: Derek Fang <derek.fang@realtek.com<mailto:derek.fang@realtek.com>> Link: https://lore.kernel.org/r/20210831130258.19286-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge tag 'soundwire-5.15-rc1' of ↵Greg Kroah-Hartman2021-08-241-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.15-rc1 - Core has updates to support SoundWire mockup device (includes tag from asoc), improved error handling and slave status. - Drivers has update on Intel driver for new quriks and better handling of errors and suspend routines * tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down soundwire: cadence: override PDI configurations to create loopback soundwire: cadence: add debugfs interface for PDI loopbacks soundwire: stream: don't program mockup device ports soundwire: bus: squelch error returned by mockup devices soundwire: add flag to ignore all command/control for mockup devices soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA soundwire: cadence: add paranoid check on self-clearing bits soundwire: dmi-quirks: add quirk for Intel 'Bishop County' NUC M15 soundwire: bus: update Slave status in sdw_clear_slave_status soundwire: cadence: Remove ret variable from sdw_cdns_irq() soundwire: bus: filter out more -EDATA errors on clock stop soundwire: dmi-quirks: add ull suffix for SoundWire _ADR values ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests ASoC: soc-acpi: tgl: add table for SoundWire mockup devices ASoC: soc-acpi: cnl: add table for SoundWire mockup devices ASoC: codecs: add SoundWire mockup device support
| * ASoC: codecs: add SoundWire mockup device supportPierre-Louis Bossart2021-07-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To test the host controller and bus management code, it is currently required to have a physical SoundWire peripheral attached to the bus. To help with pre-silicon or early hardware enablement, it would be very useful to have a SoundWire 'mockup' device that is exposed in platform firmware but does not drive any signal on the bus. This is different to the existing ASoC 'dummy' codec uses for I2S/TDM, the SoundWire spec makes it clear that a device that is not attached to the bus is not permitted to interact with the bus, be it for command/control or data. This patch exposes a 'mockup' device, with a minimalist driver, with 4 partID values reserved by Intel for such test configurations. The mockup device exposes one full-duplex DAI based on 2 ports (DP1 for playback and DP8 for capture). The capture data port is just virtual, such a mockup device is prevented by the SoundWire specification from presenting any data generated by a Source port without being Attached. All the callbacks exposed by the SoundWire Slave interface are populated, even if they just return immediately. This is intentional to describe what a minimal codec driver should do and implement and help new codec vendors provide support for their devices. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210714032209.11284-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: codecs: wcd938x: fix wcd module dependencyArnd Bergmann2021-07-221-1/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With SND_SOC_ALL_CODECS=y and SND_SOC_WCD938X_SDW=m, there is a link error from a reverse dependency, since the built-in codec driver calls into the modular soundwire back-end: x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_codec_free': wcd938x.c:(.text+0x2c0): undefined reference to `wcd938x_sdw_free' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_codec_hw_params': wcd938x.c:(.text+0x2f6): undefined reference to `wcd938x_sdw_hw_params' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_codec_set_sdw_stream': wcd938x.c:(.text+0x332): undefined reference to `wcd938x_sdw_set_sdw_stream' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_tx_swr_ctrl': wcd938x.c:(.text+0x23de): undefined reference to `wcd938x_swr_get_current_bank' x86_64-linux-ld: sound/soc/codecs/wcd938x.o: in function `wcd938x_bind': wcd938x.c:(.text+0x2579): undefined reference to `wcd938x_sdw_device_get' x86_64-linux-ld: wcd938x.c:(.text+0x25a1): undefined reference to `wcd938x_sdw_device_get' x86_64-linux-ld: wcd938x.c:(.text+0x262a): undefined reference to `__devm_regmap_init_sdw' Work around this using two small hacks: An added Kconfig dependency prevents the main driver from being built-in when soundwire support itself is a loadable module to allow calling devm_regmap_init_sdw(), and a Makefile trick links the wcd938x-sdw backend as built-in if needed to solve the dependency between the two modules. Fixes: 045442228868 ("ASoC: codecs: wcd938x: add audio routing and Kconfig") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210721150510.1837221-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: wcd938x: add audio routing and KconfigSrinivas Kandagatla2021-06-141-0/+4
| | | | | | | | | This patch adds audio routing for both playback and capture and Makefile and Kconfigs changes for wcd938x Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210609090943.7896-10-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge tag 'tb-mfd-asoc-v5.14-1' of ↵Mark Brown2021-06-071-0/+2
|\ | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into asoc-5.14 Immutable branch between MFD and ASoC due for the v5.14 merge window
| * ASoC: Add Rockchip rk817 audio CODEC supportChris Morgan2021-06-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | Add support for the Rockchip rk817 audio codec integrated into the rk817 PMIC. This is based on the sources provided by Rockchip from their BSP kernel. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | ASoC: codecs: wcd: add multi button Headset detection supportSrinivas Kandagatla2021-06-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Most new Qualcomm WCD codecs support MBHC(Multi Button Headset Control) via ADC. This patchset adds support to Common parts of this MBHC support so that WCD codecs need not duplicate them. To do that codec exposes set of register fields and callbacks to this common driver to control it. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210604115230.23259-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: codecs: Add driver for NXP/Goodix TFA989x (TFA1) amplifiersStephan Gerhold2021-05-241-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers used in many smartphones and tablets. Most of them are sold as "smart amplifiers" with built-in "CoolFlux DSP" that is used for volume control, plus a "sophisticated speaker-boost and protection algorithm". Unfortunately, they are also almost entirely undocumented. The short datasheets (e.g. [1] for TFA9897) describe the available features, but do not provide any information about the registers or how to use the "CoolFlux DSP". The amplifiers are most often configured through proprietary userspace libraries. There are also some (rather complex) kernel drivers (e.g. [2]) but even those rely on obscure firmware blobs for configuration (so-called "containers"). They seem to contain different "profiles" with tuned speaker settings, sample rates and volume steps (which would be better exposed as separate ALSA mixers). The format of the firmware files seems to have changed a lot over the time, so it's not even possible to simply re-use the firmware originally provided by the vendor. Overall, it seems close to impossible to develop a proper mainline driver for these amplifiers that could make proper use of the built-in DSP. This commit implements a compromise: At least the TFA1 family of the TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass* the DSP using a special register sequence. The register sequence can be found in similar variations in the kernel drivers from lots of vendors e.g. in [3] and was probably mainly used for factory testing. With the DSP bypassed, the amplifier acts mostly like a dumb standard speaker amplifier, without (hardware) volume control. However, the setup is much simpler and it works without any obscure firmware. This driver implements the DSP bypass combined with chip-specific initialization sequences adapted from [2]. Only TFA9895 is supported in this initial commit. Except for the lack of volume control I can not hear any difference with or without the DSP, it works just fine. This driver allows the speaker to work on mainline Linux running on the Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897]. TFA9897 support will be added in separate patch set later. [1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78 [2]: https://source.codeaurora.org/external/mas/tfa98xx [3]: https://github.com/sonyxperiadev/kernel/blob/57b5050e340f40a88e1ddb8d16fd9adb44418923/sound/soc/codecs/tfa98xx.c#L1422-L1462 Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: tlv320aic3x: add SPI supportJiri Prchal2021-04-071-0/+2
| | | | | | | | Added SPI support. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Link: https://lore.kernel.org/r/20210406142439.102396-5-jiri.prchal@aksignal.cz Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: tlv320aic3x: move I2C to separated fileJiri Prchal2021-04-071-0/+2
| | | | | | | | Moved I2C related staff to separated source file. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Link: https://lore.kernel.org/r/20210406142439.102396-4-jiri.prchal@aksignal.cz Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: mediatek: mt6359: add MT6359 accdet jack driverArgus Lin2021-03-251-0/+2
| | | | | | | | | MT6359 audio codec supports jack detection feature, adds MT6359 accdet driver to support jack plugged detection and key detection. Signed-off-by: Argus Lin <argus.lin@mediatek.com> Link: https://lore.kernel.org/r/1615383186-18500-3-git-send-email-argus.lin@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: arizona-jack: convert into a helper library for codec driversHans de Goede2021-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the arizona extcon driver into a helper library for direct use from the arizona codec-drivers, rather then being bound to a separate MFD cell. Note the probe (and remove) sequence is split into 2 parts: 1. The arizona_jack_codec_dev_probe() function inits a bunch of jack-detect specific variables in struct arizona_priv and tries to get a number of resources where getting them may fail with -EPROBE_DEFER. 2. Then once the machine driver has create a snd_sock_jack through snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on the codec component, which will call the new arizona_jack_set_jack(), which sets up jack-detection and requests the IRQs. This split is necessary, because the IRQ handlers need access to the arizona->dapm pointer and the snd_sock_jack which are not available when the codec-driver's probe function runs. Note this requires that machine-drivers for codecs which are converted to use the new helper functions from arizona-jack.c are modified to create a snd_soc_jack through snd_soc_card_jack_new() and register this jack with the codec through snd_soc_component_set_jack(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-10-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt1019: add rt1019 amplifier driverJack Yu2021-03-181-0/+2
| | | | | | | | This is initial amplifier driver for rt1019. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210311025809.31852-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driverShuming Fan2021-03-101-0/+2
| | | | | | | | This is the initial codec driver for rt711 SDCA version. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210302091506.18745-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt715-sdca: Add RT715 sdca vendor-specific driverJack Yu2021-03-101-0/+2
| | | | | | | | This is initial sdca version of codec driver for rt715. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210302103042.19528-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: rt1316: Add RT1316 SDCA vendor-specific driverShuming Fan2021-03-101-0/+2
| | | | | | | | This is the initial amplifier driver for rt1316 SDCA version. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210223090759.15323-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: lpass-tx-macro: add support for lpass tx macroSrinivas Kandagatla2021-02-111-0/+2
| | | | | | | | | | | | Qualcomm LPASS (Low Power Audio SubSystem) has internal codec TX macro block which is used for connecting with external Soundwire TX Codecs like WCD938x. This patch adds support to the codec part of the TX Macro block Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210211122735.5691-7-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: lpass-rx-macro: add support for lpass rx macroSrinivas Kandagatla2021-02-111-0/+2
| | | | | | | | | | LPASS RX Codec Macro is available in Qualcomm LPASS (Low Power Audio SubSystem). This is used for connecting with SoundWire devices like WCD938x Codecs to provide headphone/ear/lineout functionality. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210211122735.5691-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codec: Add driver for JZ4760 internal codecChristophe Branchereau2021-02-081-0/+2
| | | | | | | | | Add support for the internal codec found in the JZ4760 SoC from Ingenic. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210123140958.12895-3-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: remove zte zx driversArnd Bergmann2021-01-201-2/+0
| | | | | | | | | | | The zte zx platform is getting removed, so this driver is no longer needed. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120162553.21666-3-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: remove sirf prima/atlas driversArnd Bergmann2021-01-201-2/+0
| | | | | | | | | | The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120162553.21666-2-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge tag 'regmap-v5.11' of ↵Linus Torvalds2020-12-151-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This is quite a busy release for regmap with two substantial features being added: - Support for register maps Soundwire 1.2 multi-byte operations, allowing atomic support for registers larger than a single byte. - Support for relaxed I/O without barriers in MMIO regmaps, allowing them to be used efficiently on systems where default MMIO operations include barriers. There was also an addition and revert of use of the new Soundwire support for RT715 due to build issues with the driver built in, my tests only covered building it as a module, the patch wasn't just dropped as it had already been merged elsewhere" * tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: ASoC: rt715: Fix build regmap: sdw: add required header files regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event regmap: Fix order of regmap write log regmap: mmio: add config option to allow relaxed MMIO accesses
* | ASoC: add simple-muxAlexandre Belloni2020-12-091-0/+5
| | | | | | | | | | | | | | | | | | Add a driver for simple mux driven by gpios. It currently only supports one gpio, muxing one of two inputs to a single output. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge branch ↵Mark Brown2020-12-021-0/+2
|\ \ | | | | | | | | | '20201104_yung_chuan_liao_regmap_soundwire_asoc_add_soundwire_sdca_support' (early part) into asoc-5.11
| * | ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec driverJack Yu2020-11-261-0/+2
| |/ | | | | | | | | | | | | | | | | | | First version of rt715 sdw sdca codec driver. Signed-off-by: Jack Yu <jack.yu@realtek.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20201103172226.4278-4-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: Add ADAU1372 audio CODEC supportLars-Peter Clausen2020-11-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | Add support for the Analog Devices ADAU1372 audio CODEC. [Alexandre Belloni: allow 32kHz for TDM4 in slave mode] Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201127123030.1610574-2-alexandre.belloni@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: codecs: lpass-va-macro: Add support to VA MacroSrinivas Kandagatla2020-11-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Qualcomm LPASS (Low Power Audio SubSystem) has internal codec VA macro block which is used for connecting with DMICs. This patch adds support to the codec part of the VA Macro block Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201105113458.12360-6-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: codecs: lpass-wsa-macro: Add support to WSA MacroSrinivas Kandagatla2020-11-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm LPASS (Low Power Audio SubSystem) has internal codec WSA macro block which is used for connecting with WSA Smart speakers over soundwire. This patch adds support to the codec part of the WSA Macro block. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201105113458.12360-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: nau8315: add codec driverDavid Lin2020-11-101-0/+2
|/ | | | | | | | | Add codec driver for Nuvoton NAU8315. Signed-off-by: David Lin <CTLIN0@nuvoton.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201102023212.594137-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: tas2764: Add the driver for the TAS2764Dan Murphy2020-10-081-0/+2
| | | | | | | | | Introduce the Texas Instruments TAS2764 amplifier driver with I/V sense for loud speaker applications. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20201007155341.10139-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: cs4234: Add support for Cirrus Logic CS4234 codecLucas Tanure2020-09-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CS4234 is a highly versatile CODEC that combines 4 channels of high performance analog to digital conversion, 4 channels of high performance digital to analog conversion for audio, and 1 channel of digital to analog conversion to provide a nondelayed audio reference signal to an external Class H tracking power supply. DAC5 is only supported as a 5th audio channel. Tracking Power Supply mode is not currently supported by the driver. In DSP_A mode the slots for DAC1-4 and optionally DAC5 can be set. The codec always claims 4 slots for DAC1-4 and these must be in the same nibble of the mask. The codec has a fixed mapping for ADC slots. In I2S/LJ modes the codec has a fixed mapping for DAC1-4 and ADC1-4. DAC5 is not available in these modes. The MCLK source must be preset to a valid frequency before probe() because it must be running all the time the codec is out of reset. The VA_SEL bit will be set automatically to 3.3v or 5v during probe() based on the reported voltage of the regulator supplying VA. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200928111821.26967-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-12 15:06:10 +0000