summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/net/mptcp
Commit message (Collapse)AuthorAgeFilesLines
* selftests: mptcp: userspace PM support for MP_PRIO signalsKishen Maloor2022-07-062-2/+103
| | | | | | | | | | | | | | | | This change updates the testing sample (pm_nl_ctl) to exercise the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to issue MP_PRIO signals over the selected subflow. E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003 userspace_pm.sh has a new selftest that invokes this command. Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* selftests: mptcp: Initialize variables to quiet gcc 12 warningsMat Martineau2022-06-283-3/+3
| | | | | | | | | | | | | | | | In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable might be used uninitialized. This is a false positive because the only code path that could lead to uninitialized access is where getaddrinfo() fails, but the local xgetaddrinfo() wrapper exits if such a failure occurs. Initialize the 'sock' variable anyway to allow the tools to build with gcc 12. Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* selftests: mptcp: more stable diag testsPaolo Abeni2022-06-281-8/+40
| | | | | | | | | | | | | | | | | | The mentioned test-case still use an hard-coded-len sleep to wait for a relative large number of connection to be established. On very slow VM and with debug build such timeout could be exceeded, causing failures in our CI. Address the issue polling for the expected condition several times, up to an unreasonable high amount of time. On reasonably fast system the self-tests will be faster then before, on very slow one we will still catch the correct condition. Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* selftests: mptcp: add MP_FAIL reset testcaseGeliang Tang2022-05-191-0/+10
| | | | | | | | | | | | | | | | | | | | | Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL reset case. Use the test_linkfail value to make 1024KB test files. Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules to produce the bit flips to trigger the checksum failures on ns2eth2. Add delays on ns2eth1 to make sure more data can translate on ns2eth2. The check_invert flag is enabled in reset_with_fail(), so this test prints out the inverted bytes, instead of the file mismatch errors. Invoke pedit_action_pkts() to get the numbers of the packets edited by the tc pedit actions, and print this numbers to the output. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-05-191-2/+46
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add subflow limits test-casesPaolo Abeni2022-05-131-2/+46
| | | | | | | | | | | | | | | | | | | | | | | | Add and delete a bunch of endpoints and verify the respect of configured limits. This covers the codepath introduced by the previous patch. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | selftests: mptcp: fix a mp_fail test warningGeliang Tang2022-05-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Old tc versions (iproute2 5.3) show actions in multiple lines, not a single line. Then the following unexpected MP_FAIL selftest output occurs: file received by server has inverted byte at 169 ./mptcp_join.sh: line 1277: [: [{"total acts":1},{"actions":[{"order":0 pedit ,"control_action":{"type":"pipe"}keys 1 index 1 ref 1 bind 1,"installed":0,"last_used":0 key #0 at 148: val ff000000 mask ffffffff 5: integer expression expected 001 Infinite map syn[ ok ] - synack[ ok ] - ack[ ok ] sum[ ok ] - csum [ ok ] ftx[ ok ] - failrx[ ok ] rtx[ ok ] - rstrx [ ok ] itx[ ok ] - infirx[ ok ] ftx[ ok ] - failrx[ ok ] invert This patch adds a 'grep' before 'sed' to fix this. Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase") Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | selftests: mptcp: functional tests for the userspace PM typeKishen Maloor2022-05-041-0/+779
| | | | | | | | | | | | | | | | | | | | | | This change adds a selftest script that performs a comprehensive behavioral/functional test of all userspace PM capabilities by exercising all the newly added APIs and changes to support said capabilities. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: create listeners to receive MPJsKishen Maloor2022-05-041-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change updates the "pm_nl_ctl" testing sample with a "listen" option to bind a MPTCP listening socket to the provided addr+port. This option is exercised in testing subflow initiation scenarios in conjunction with userspace path managers where the MPTCP application does not hold an active listener to accept requests for new subflows. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: capture netlink eventsKishen Maloor2022-05-041-7/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds to self-testing support for the MPTCP netlink interface by capturing various MPTCP netlink events (and all their metadata) associated with connections, subflows and address announcements. It is used in self-testing scripts that exercise MPTCP netlink commands to precisely validate those operations by examining the dispatched MPTCP netlink events in response to those commands. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROYKishen Maloor2022-05-041-0/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change updates the "pm_nl_ctl" testing sample with a "dsf" (destroy subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection. E.g. ./pm_nl_ctl dsf lip 10.0.2.1 lport 44567 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATEKishen Maloor2022-05-041-0/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change updates the "pm_nl_ctl" testing sample with a "csf" (create subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection. E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: support MPTCP_PM_CMD_REMOVEKishen Maloor2022-05-041-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change updates the "pm_nl_ctl" testing sample with a "rem" (remove) option to support the newly added netlink interface command MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the chosen MPTCP connection. E.g. ./pm_nl_ctl rem token 823274047 id 23 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCEKishen Maloor2022-05-041-0/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change updates the "pm_nl_ctl" testing sample with an "ann" (announce) option to support the newly added netlink interface command MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the chosen MPTCP connection. E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: ADD_ADDR echo test with missing userspace daemonMat Martineau2022-05-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when there is an active userspace daemon. If the daemon is restarting or hasn't loaded yet, the missing echo will cause the peer to retransmit the ADD_ADDR - and hopefully the daemon will be ready to receive it at that later time. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | selftests: mptcp: Add tests for userspace PM typeMat Martineau2022-04-291-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | These tests ensure that the in-kernel path manager is bypassed when the userspace path manager is configured. Kernel code is still responsible for ADD_ADDR echo, so also make sure that's working. Tested-by: Geliang Tang <geliang.tang@suse.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | selftests: mptcp: print extra msg in chk_csum_nrGeliang Tang2022-04-271-1/+10
| | | | | | | | | | | | | | | | | | When the multiple checksum errors occur in chk_csum_nr(), print the numbers of the errors as an extra message. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: check MP_FAIL response mibsGeliang Tang2022-04-271-3/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends chk_fail_nr to check the MP_FAIL response mibs. Add a new argument invert for chk_fail_nr to allow it can check the MP_FAIL TX and RX mibs from the opposite direction. When the infinite map is received before the MP_FAIL response, the response will be lost. A '-' can be added into fail_tx or fail_rx to represent that MP_FAIL response TX or RX can be lost when doing the checks. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: add infinite map testcaseGeliang Tang2022-04-272-1/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the single subflow test case for MP_FAIL, to test the infinite mapping case. Use the test_linkfail value to make 128KB test files. Add a new function reset_with_fail(), in it use 'iptables' and 'tc action pedit' rules to produce the bit flips to trigger the checksum failures. Set validate_checksum to enable checksums for the MP_FAIL tests without passing the '-C' argument. Set check_invert flag to enable the invert bytes check for the output data in check_transfer(). Instead of the file mismatch error, this test prints out the inverted bytes. Add a new function pedit_action_pkts() to get the numbers of the packets edited by the tc pedit actions. Print this numbers to the output. Also add the needed kernel configures in the selftests config file. Suggested-by: Davide Caratti <dcaratti@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests: mptcp: add infinite map mibs checkGeliang Tang2022-04-231-1/+35
| | | | | | | | | | | | | | | | | | | | This patch adds a function chk_infi_nr() to check the mibs for the infinite mapping. Invoke it in chk_join_nr() when validate_checksum is set. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | selftests/mptcp: add diag listen testsFlorian Westphal2022-04-111-0/+38
|/ | | | | | | | | | | | Check dumping of mptcp listener sockets: 1. filter by dport should not return any results 2. filter by sport should return listen sk 3. filter by saddr+sport should return listen sk 4. no filter should return listen sk Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'net-next-5.18' of ↵Linus Torvalds2022-03-245-1074/+1804
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
| * selftests: mptcp: join: make it shellcheck compliantMatthieu Baerts2022-03-101-60/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a few issues reported by ShellCheck: - SC2068: Double quote array expansions to avoid re-splitting elements. - SC2206: Quote to prevent word splitting/globbing, or split robustly with mapfile or read -a. - SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. - SC2155: Declare and assign separately to avoid masking return values. - SC2162: read without -r will mangle backslashes. - SC2219: Instead of 'let expr', prefer (( expr )) . - SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?. - SC2236: Use -n instead of ! -z. - SC2004: $/${} is unnecessary on arithmetic variables. - SC2012: Use find instead of ls to better handle non-alphanumeric filenames. - SC2002: Useless cat. Consider 'cmd < file | ..' or 'cmd file | ..' instead. SC2086 (Double quotes to prevent globbing and word splitting) is ignored because it is controlled for the moment and there are too many to change. While at it, also fixed the alignment in one comment. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: avoid backquotesMatthieu Baerts2022-03-101-32/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As explained on ShellCheck's wiki [1], it is recommended to avoid backquotes `...` in favour of parenthesis $(...): > Backtick command substitution `...` is legacy syntax with several > issues. > > - It has a series of undefined behaviors related to quoting in POSIX. > - It imposes a custom escaping mode with surprising results. > - It's exceptionally hard to nest. > > $(...) command substitution has none of these problems, and is > therefore strongly encouraged. [1] https://www.shellcheck.net/wiki/SC2006 Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: clarify local/global varsMatthieu Baerts2022-03-101-52/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some vars are redefined in different places. Best to avoid this classical Bash pitfall where variables are accidentally overridden by other functions because the proper scope has not been defined. Most issues are with loops: typically 'i' is used in for-loops but if it is not global, calling a function from a for-loop also doing a for-loop with the same non local 'i' variable causes troubles because the first 'i' will be assigned to another value. To prevent such issues, the iterator variable is now declared as local just before the loop. If it is always done like this, issues are avoided. To distinct between local and non local variables, all non local ones are defined at the beginning of the script. The others are now defined with the "local" keyword. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: helper to filter TCPMatthieu Baerts2022-03-101-3/+12
| | | | | | | | | | | | | | | | | | | | This is more readable and reduces duplicated commands. This might also be useful to add v6 support and switch to nftables. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: list failure at the endMatthieu Baerts2022-03-101-30/+55
| | | | | | | | | | | | | | | | | | | | | | | | With ~100 tests, it helps to have this summary at the end not to scroll to find which one has failed. It is especially interseting when looking at the output produced by the CI where the kernel logs from the serial are mixed together. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: alt. to exec specific testsMatthieu Baerts2022-03-101-214/+232
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Running a specific test by giving the ID is often what we want: the CI reports an issue with the Nth test, it is reproducible with: ./mptcp_join.sh N But this might not work when there is a need to find which commit has introduced a regression making a test unstable: failing from time to time. Indeed, a specific test is not attached to one ID: the ID is in fact a counter. It means the same test can have a different ID if other tests have been added/removed before this unstable one. Remembering the current test can also help listing failed tests at the end. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: option to execute specific testsMatthieu Baerts2022-03-101-752/+877
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Often, it is needed to run one specific test. There are options to run subgroups of tests but when only one fails, no need to run all the subgroup. So far, the solution was to edit the script to comment the tests that are not needed but that's not ideal. Now, it is possible to run one specific test by giving the ID of the tests that are going to be validated, e.g. ./mptcp_join.sh 36 37 This is cleaner and saves time. Technically, the reset* functions now return 0 if the test can be executed. This naturally creates sections per test in the code which is also helpful to understand what a test is exactly doing. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: reset failing linksMatthieu Baerts2022-03-101-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | Best to always reset this env var before each test to avoid surprising behaviour depending on the order tests are running. Also clearly set it for the last failing links test is also needed when only this test is executed. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: define tests groups onceMatthieu Baerts2022-03-101-94/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When adding a new tests group, it has to be defined in multiple places: - in the all_tests() function - in the 'usage()' function - in the getopts: short option + what to do when the option is used Because it is easy to forget one of them, it is useful to have to define them only once. Note: only using an associative array would simplify the code but the entries are stored in a hashtable and iterating over the different items doesn't give the same order as the one used in the declaration of this array. Because we want to run these tests in the same order as before, a "simple" array is used first. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: drop msg argument of chk_csum_nrGeliang Tang2022-03-101-14/+12
| | | | | | | | | | | | | | | | | | | | This patch dropped the msg argument of chk_csum_nr, to unify chk_csum_nr with other chk_*_nr functions. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add implicit endpoint test casePaolo Abeni2022-03-082-1/+126
| | | | | | | | | | | | | | | | | | | | | | | | Ensure implicit endpoint are created when expected and that the user-space can update them Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * mptcp: introduce implicit endpointsPaolo Abeni2022-03-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some edge scenarios, an MPTCP subflows can use a local address mapped by a "implicit" endpoint created by the in-kernel path manager. Such endpoints presence can be confusing, as it's creation is hard to track and will prevent the later endpoint creation from the user-space using the same address. Define a new endpoint flag to mark implicit endpoints and allow the user-space to replace implicit them with user-provided data at endpoint creation time. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * mptcp: more careful RM_ADDR generationPaolo Abeni2022-03-081-6/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The in-kernel MPTCP path manager, when processing the MPTCP_PM_CMD_FLUSH_ADDR command, generates RM_ADDR events for each known local address. While that is allowed by the RFC, it makes unpredictable the exact number of RM_ADDR generated when both ends flush the PM addresses. This change restricts the RM_ADDR generation to previously explicitly announced addresses, and adjust the expected results in a bunch of related self-tests. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: Rename wait functionMat Martineau2022-03-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The "selftests: mptcp: improve 'fair usage on close' stability" commit changed that self test to check the TcpAttemptFails MIB instead of looking for TW sockets. The associated bash function wasn't renamed in that commit because of the merge conflicts it would cause, so this commit updates the function name as Paolo originally intended. Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: join: allow running -cCiMatthieu Baerts2022-03-081-39/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch, no tests would be ran when launching: mptcp_join.sh -cCi In any order or a combination with 2 of these letters. The recommended way with getopt is first parse all options and then act. This allows to do some actions in priority, e.g. display the help menu and stop. But also some global variables changing the behaviour of this selftests -- like the ones behind -cCi options -- can be set before running the different tests. By doing that, we can also avoid long and unreadable regex. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: update output info of chk_rm_nrGeliang Tang2022-03-041-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf', which means 'remove subflow'. Added the display of whether the inverted namespaces has been used to check the mib counters. The new output looks like this: 002 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ] rm [ ok ] - rmsf [ ok ] 003 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] rm [ ok ] - rmsf [ ok ] invert Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add more arguments for chk_join_nrGeliang Tang2022-03-041-14/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch added five more arguments for chk_join_nr(). The default values of them are all zero. The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to check the mib counters of the checksum errors in ns1 and ns2. A '+' can be added into this two arguments to represent that multiple checksum errors are allowed when doing this check. For example, chk_csum_nr "" +2 +2 indicates that two or more checksum errors are allowed in both ns1 and ns2. The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and chk_rst_nr() respectively, to check the sending and receiving mib counters of MP_FAIL and MP_RST. Also did some cleanups in chk_fail_nr(), renamed two local variables and updated the output message. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add invert check in check_transferGeliang Tang2022-03-041-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch added the invert bytes check for the output data in check_transfer(). Instead of the file mismatch error: [ FAIL ] file received by server does not match (in, out): -rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv Trailing bytes are: MPTCP_TEST_FILE_END_MARKER -rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z Trailing bytes are: MPTCP_TEST_FILE_END_MARKER Print out the inverted bytes like this: file received by server has inverted byte at 7454789 file received by server has inverted byte at 7454790 file received by server has inverted byte at 7454791 file received by server has inverted byte at 7454792 Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add fastclose testcaseGeliang Tang2022-03-041-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch added the self test for MP_FASTCLOSE. Reused the argument addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to mptcp_connect commands. Then mptcp_connect disconnected the connections to trigger the MP_FASTCLOSE sending and receiving. Used chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to check the MP_RST mibs. This test used the test_linkfail value to make 1024KB test files. The output looks like this: Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server 001 fastclose test syn[ ok ] - synack[ ok ] - ack[ ok ] ctx[ ok ] - fclzrx[ ok ] rtx[ ok ] - rstrx [ ok ] invert Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: reuse linkfail to make given size filesGeliang Tang2022-03-041-5/+27
| | | | | | | | | | | | | | | | | | | | This patch reused the test_linkfail values above 2 to make test files with the given sizes (KB) for both the client side and the server side. It's useful for the test cases using different file sizes. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add extra_args in do_transferGeliang Tang2022-03-041-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using a global variable mptcp_connect, this patch added a new local variable extra_args in do_transfer() to store the extra arguments passing to the mptcp_connect commands. This patch also renamed the speed level 'least' to 'speed_*'. This more flexible way can avoid the need to add new speed levels in the future. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add the MP_RST mibs checkGeliang Tang2022-03-041-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch added a new function chk_rst_nr() to check the numbers of the MP_RST sending and receiving mibs. Showed in the output whether the inverted namespaces check order is used. Since if we pass -Cz to mptcp_join.sh, the MP_RST information is showed twice. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: add the MP_FASTCLOSE mibs checkGeliang Tang2022-03-041-0/+32
| | | | | | | | | | | | | | | | | | This patch added a new function chk_fclose_nr() to check the numbers of the MP_FASTCLOSE sending and receiving mibs. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * selftests: mptcp: adjust output alignment for more testsGeliang Tang2022-03-041-11/+12
| | | | | | | | | | | | | | | | | | The number of self tests in mptcp_join.sh will soon be more than 100, the output alignment is no longer OK. This patch adjusted it. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-03-031-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-02-242-14/+62
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tools/testing/selftests/net/mptcp/mptcp_join.sh 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") 857898eb4b28 ("selftests: mptcp: add missing join check") 6ef84b1517e0 ("selftests: mptcp: more robust signal race test") https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/ drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions") c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information") 09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr") 84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr") efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow") 3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | | selftests: mptcp: add csum mib check for mptcp_connectGeliang Tang2022-02-171-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch added the data checksum error mib counters check for the script mptcp_connect.sh when the data checksum is enabled. In do_transfer(), got the mib counters twice, before and after running the mptcp_connect commands. The latter minus the former is the actual number of the data checksum mib counter. The output looks like this: ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ] ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ] server got 1 data checksum error[s] Fixes: 94d66ba1d8e48 ("selftests: mptcp: enable checksum in mptcp_connect.sh") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255 Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | | selftests: mptcp: join: check for tools only if neededMatthieu Baerts2022-02-171-18/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To allow showing the 'help' menu even if these tools are not available. While at it, also avoid launching the command then checking $?. Instead, the check is directly done in the 'if'. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-01-01 15:14:50 +0000