pcie.txt (14949B)
1PCI EXPRESS GUIDELINES 2====================== 3 41. Introduction 5================ 6The doc proposes best practices on how to use PCI Express (PCIe) / PCI 7devices in PCI Express based machines and explains the reasoning behind 8them. 9 10Note that the PCIe features are available only when using the 'q35' 11machine type on x86 architecture and the 'virt' machine type on AArch64. 12Other machine types do not use PCIe at this time. 13 14The following presentations accompany this document: 15 (1) Q35 overview. 16 https://wiki.qemu.org/images/4/4e/Q35.pdf 17 (2) A comparison between PCI and PCI Express technologies. 18 https://wiki.qemu.org/images/f/f6/PCIvsPCIe.pdf 19 20Note: The usage examples are not intended to replace the full 21documentation, please use QEMU help to retrieve all options. 22 232. Device placement strategy 24============================ 25QEMU does not have a clear socket-device matching mechanism 26and allows any PCI/PCI Express device to be plugged into any 27PCI/PCI Express slot. 28Plugging a PCI device into a PCI Express slot might not always work and 29is weird anyway since it cannot be done for "bare metal". 30Plugging a PCI Express device into a PCI slot will hide the Extended 31Configuration Space thus is also not recommended. 32 33The recommendation is to separate the PCI Express and PCI hierarchies. 34PCI Express devices should be plugged only into PCI Express Root Ports and 35PCI Express Downstream ports. 36 372.1 Root Bus (pcie.0) 38===================== 39Place only the following kinds of devices directly on the Root Complex: 40 (1) PCI Devices (e.g. network card, graphics card, IDE controller), 41 not controllers. Place only legacy PCI devices on 42 the Root Complex. These will be considered Integrated Endpoints. 43 Note: Integrated Endpoints are not hot-pluggable. 44 45 Although the PCI Express spec does not forbid PCI Express devices as 46 Integrated Endpoints, existing hardware mostly integrates legacy PCI 47 devices with the Root Complex. Guest OSes are suspected to behave 48 strangely when PCI Express devices are integrated 49 with the Root Complex. 50 51 (2) PCI Express Root Ports (ioh3420), for starting exclusively PCI Express 52 hierarchies. 53 54 (3) PCI Express to PCI Bridge (pcie-pci-bridge), for starting legacy PCI 55 hierarchies. 56 57 (4) Extra Root Complexes (pxb-pcie), if multiple PCI Express Root Buses 58 are needed. 59 60 pcie.0 bus 61 ---------------------------------------------------------------------------- 62 | | | | 63 ----------- ------------------ ------------------- -------------- 64 | PCI Dev | | PCIe Root Port | | PCIe-PCI Bridge | | pxb-pcie | 65 ----------- ------------------ ------------------- -------------- 66 672.1.1 To plug a device into pcie.0 as a Root Complex Integrated Endpoint use: 68 -device <dev>[,bus=pcie.0] 692.1.2 To expose a new PCI Express Root Bus use: 70 -device pxb-pcie,id=pcie.1,bus_nr=x[,numa_node=y][,addr=z] 71 PCI Express Root Ports and PCI Express to PCI bridges can be 72 connected to the pcie.1 bus: 73 -device ioh3420,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z] \ 74 -device pcie-pci-bridge,id=pcie_pci_bridge1,bus=pcie.1 75 76 772.2 PCI Express only hierarchy 78============================== 79Always use PCI Express Root Ports to start PCI Express hierarchies. 80 81A PCI Express Root bus supports up to 32 devices. Since each 82PCI Express Root Port is a function and a multi-function 83device may support up to 8 functions, the maximum possible 84number of PCI Express Root Ports per PCI Express Root Bus is 256. 85 86Prefer grouping PCI Express Root Ports into multi-function devices 87to keep a simple flat hierarchy that is enough for most scenarios. 88Only use PCI Express Switches (x3130-upstream, xio3130-downstream) 89if there is no more room for PCI Express Root Ports. 90Please see section 4. for further justifications. 91 92Plug only PCI Express devices into PCI Express Ports. 93 94 95 pcie.0 bus 96 ---------------------------------------------------------------------------------- 97 | | | 98 ------------- ------------- ------------- 99 | Root Port | | Root Port | | Root Port | 100 ------------ ------------- ------------- 101 | -------------------------|------------------------ 102 ------------ | ----------------- | 103 | PCIe Dev | | PCI Express | Upstream Port | | 104 ------------ | Switch ----------------- | 105 | | | | 106 | ------------------- ------------------- | 107 | | Downstream Port | | Downstream Port | | 108 | ------------------- ------------------- | 109 -------------|-----------------------|------------ 110 ------------ 111 | PCIe Dev | 112 ------------ 113 1142.2.1 Plugging a PCI Express device into a PCI Express Root Port: 115 -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ 116 -device <dev>,bus=root_port1 1172.2.2 Using multi-function PCI Express Root Ports: 118 -device ioh3420,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0] \ 119 -device ioh3420,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \ 120 -device ioh3420,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \ 1212.2.3 Plugging a PCI Express device into a Switch: 122 -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ 123 -device x3130-upstream,id=upstream_port1,bus=root_port1[,addr=x] \ 124 -device xio3130-downstream,id=downstream_port1,bus=upstream_port1,chassis=x1,slot=y1[,addr=z1]] \ 125 -device <dev>,bus=downstream_port1 126 127Notes: 128 - (slot, chassis) pair is mandatory and must be unique for each 129 PCI Express Root Port. slot defaults to 0 when not specified. 130 - 'addr' parameter can be 0 for all the examples above. 131 132 1332.3 PCI only hierarchy 134====================== 135Legacy PCI devices can be plugged into pcie.0 as Integrated Endpoints, 136but, as mentioned in section 5, doing so means the legacy PCI 137device in question will be incapable of hot-unplugging. 138Besides that use PCI Express to PCI Bridges (pcie-pci-bridge) in 139combination with PCI-PCI Bridges (pci-bridge) to start PCI hierarchies. 140 141Prefer flat hierarchies. For most scenarios a single PCI Express to PCI Bridge 142(having 32 slots) and several PCI-PCI Bridges attached to it 143(each supporting also 32 slots) will support hundreds of legacy devices. 144The recommendation is to populate one PCI-PCI Bridge under the 145PCI Express to PCI Bridge until is full and then plug a new PCI-PCI Bridge... 146 147 pcie.0 bus 148 ---------------------------------------------- 149 | | 150 ----------- ------------------- 151 | PCI Dev | | PCIe-PCI Bridge | 152 ----------- ------------------- 153 | | 154 ------------------ ------------------ 155 | PCI-PCI Bridge | | PCI-PCI Bridge | 156 ------------------ ------------------ 157 | | 158 ----------- ----------- 159 | PCI Dev | | PCI Dev | 160 ----------- ----------- 161 1622.3.1 To plug a PCI device into pcie.0 as an Integrated Endpoint use: 163 -device <dev>[,bus=pcie.0] 1642.3.2 Plugging a PCI device into a PCI-PCI Bridge: 165 -device pcie-pci-bridge,id=pcie_pci_bridge1[,bus=pcie.0] \ 166 -device pci-bridge,id=pci_bridge1,bus=pcie_pci_bridge1[,chassis_nr=x][,addr=y] \ 167 -device <dev>,bus=pci_bridge1[,addr=x] 168 Note that 'addr' cannot be 0 unless shpc=off parameter is passed to 169 the PCI Bridge/PCI Express to PCI Bridge. 170 1713. IO space issues 172=================== 173The PCI Express Root Ports and PCI Express Downstream ports are seen by 174Firmware/Guest OS as PCI-PCI Bridges. As required by the PCI spec, each 175such Port should be reserved a 4K IO range for, even though only one 176(multifunction) device can be plugged into each Port. This results in 177poor IO space utilization. 178 179The firmware used by QEMU (SeaBIOS/OVMF) may try further optimizations 180by not allocating IO space for each PCI Express Root / PCI Express 181Downstream port if: 182 (1) the port is empty, or 183 (2) the device behind the port has no IO BARs. 184 185The IO space is very limited, to 65536 byte-wide IO ports, and may even be 186fragmented by fixed IO ports owned by platform devices resulting in at most 18710 PCI Express Root Ports or PCI Express Downstream Ports per system 188if devices with IO BARs are used in the PCI Express hierarchy. Using the 189proposed device placing strategy solves this issue by using only 190PCI Express devices within PCI Express hierarchy. 191 192The PCI Express spec requires that PCI Express devices work properly 193without using IO ports. The PCI hierarchy has no such limitations. 194 195 1964. Bus numbers issues 197====================== 198Each PCI domain can have up to only 256 buses and the QEMU PCI Express 199machines do not support multiple PCI domains even if extra Root 200Complexes (pxb-pcie) are used. 201 202Each element of the PCI Express hierarchy (Root Complexes, 203PCI Express Root Ports, PCI Express Downstream/Upstream ports) 204uses one bus number. Since only one (multifunction) device 205can be attached to a PCI Express Root Port or PCI Express Downstream 206Port it is advised to plan in advance for the expected number of 207devices to prevent bus number starvation. 208 209Avoiding PCI Express Switches (and thereby striving for a 'flatter' PCI 210Express hierarchy) enables the hierarchy to not spend bus numbers on 211Upstream Ports. 212 213The bus_nr properties of the pxb-pcie devices partition the 0..255 bus 214number space. All bus numbers assigned to the buses recursively behind a 215given pxb-pcie device's root bus must fit between the bus_nr property of 216that pxb-pcie device, and the lowest of the higher bus_nr properties 217that the command line sets for other pxb-pcie devices. 218 219 2205. Hot-plug 221============ 222The PCI Express root buses (pcie.0 and the buses exposed by pxb-pcie devices) 223do not support hot-plug, so any devices plugged into Root Complexes 224cannot be hot-plugged/hot-unplugged: 225 (1) PCI Express Integrated Endpoints 226 (2) PCI Express Root Ports 227 (3) PCI Express to PCI Bridges 228 (4) pxb-pcie 229 230Be aware that PCI Express Downstream Ports can't be hot-plugged into 231an existing PCI Express Upstream Port. 232 233PCI devices can be hot-plugged into PCI Express to PCI and PCI-PCI Bridges. 234The PCI hot-plug into PCI-PCI bridge is ACPI based, whereas hot-plug into 235PCI Express to PCI bridges is SHPC-based. They both can work side by side with 236the PCI Express native hot-plug. 237 238PCI Express devices can be natively hot-plugged/hot-unplugged into/from 239PCI Express Root Ports (and PCI Express Downstream Ports). 240 2415.1 Planning for hot-plug: 242 (1) PCI hierarchy 243 Leave enough PCI-PCI Bridge slots empty or add one 244 or more empty PCI-PCI Bridges to the PCI Express to PCI Bridge. 245 246 For each such PCI-PCI Bridge the Guest Firmware is expected to reserve 247 4K IO space and 2M MMIO range to be used for all devices behind it. 248 Appropriate PCI capability is designed, see pcie_pci_bridge.txt. 249 250 Because of the hard IO limit of around 10 PCI Bridges (~ 40K space) 251 per system don't use more than 9 PCI-PCI Bridges, leaving 4K for the 252 Integrated Endpoints. (The PCI Express Hierarchy needs no IO space). 253 254 (2) PCI Express hierarchy: 255 Leave enough PCI Express Root Ports empty. Use multifunction 256 PCI Express Root Ports (up to 8 ports per pcie.0 slot) 257 on the Root Complex(es), for keeping the 258 hierarchy as flat as possible, thereby saving PCI bus numbers. 259 Don't use PCI Express Switches if you don't have 260 to, each one of those uses an extra PCI bus (for its Upstream Port) 261 that could be put to better use with another Root Port or Downstream 262 Port, which may come handy for hot-plugging another device. 263 264 2655.3 Hot-plug example: 266Using HMP: (add -monitor stdio to QEMU command line) 267 device_add <dev>,id=<id>,bus=<PCI Express Root Port Id/PCI Express Downstream Port Id/PCI-PCI Bridge Id/> 268 269 2706. Device assignment 271==================== 272Host devices are mostly PCI Express and should be plugged only into 273PCI Express Root Ports or PCI Express Downstream Ports. 274PCI-PCI Bridge slots can be used for legacy PCI host devices. 275 2766.1 How to detect if a device is PCI Express: 277 > lspci -s 03:00.0 -v (as root) 278 279 03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83) 280 Subsystem: Intel Corporation Dual Band Wireless-AC 7260 281 Flags: bus master, fast devsel, latency 0, IRQ 50 282 Memory at f0400000 (64-bit, non-prefetchable) [size=8K] 283 Capabilities: [c8] Power Management version 3 284 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ 285 Capabilities: [40] Express Endpoint, MSI 00 286 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 287 Capabilities: [100] Advanced Error Reporting 288 Capabilities: [140] Device Serial Number 7c-7a-91-ff-ff-90-db-20 289 Capabilities: [14c] Latency Tolerance Reporting 290 Capabilities: [154] Vendor Specific Information: ID=cafe Rev=1 Len=014 291 292If you can see the "Express Endpoint" capability in the 293output, then the device is indeed PCI Express. 294 295 2967. Virtio devices 297================= 298Virtio devices plugged into the PCI hierarchy or as Integrated Endpoints 299will remain PCI and have transitional behaviour as default. 300Transitional virtio devices work in both IO and MMIO modes depending on 301the guest support. The Guest firmware will assign both IO and MMIO resources 302to transitional virtio devices. 303 304Virtio devices plugged into PCI Express ports are PCI Express devices and 305have "1.0" behavior by default without IO support. 306In both cases disable-legacy and disable-modern properties can be used 307to override the behaviour. 308 309Note that setting disable-legacy=off will enable legacy mode (enabling 310legacy behavior) for PCI Express virtio devices causing them to 311require IO space, which, given the limited available IO space, may quickly 312lead to resource exhaustion, and is therefore strongly discouraged. 313 314 3158. Conclusion 316============== 317The proposal offers a usage model that is easy to understand and follow 318and at the same time overcomes the PCI Express architecture limitations.