cadence_uart.c (18738B)
1/* 2 * Device model for Cadence UART 3 * 4 * Reference: Xilinx Zynq 7000 reference manual 5 * - http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf 6 * - Chapter 19 UART Controller 7 * - Appendix B for Register details 8 * 9 * Copyright (c) 2010 Xilinx Inc. 10 * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) 11 * Copyright (c) 2012 PetaLogix Pty Ltd. 12 * Written by Haibing Ma 13 * M.Habib 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License 17 * as published by the Free Software Foundation; either version 18 * 2 of the License, or (at your option) any later version. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, see <http://www.gnu.org/licenses/>. 22 */ 23 24#include "qemu/osdep.h" 25#include "hw/sysbus.h" 26#include "migration/vmstate.h" 27#include "chardev/char-fe.h" 28#include "chardev/char-serial.h" 29#include "qemu/timer.h" 30#include "qemu/log.h" 31#include "qemu/module.h" 32#include "hw/char/cadence_uart.h" 33#include "hw/irq.h" 34#include "hw/qdev-clock.h" 35#include "hw/qdev-properties-system.h" 36#include "trace.h" 37 38#ifdef CADENCE_UART_ERR_DEBUG 39#define DB_PRINT(...) do { \ 40 fprintf(stderr, ": %s: ", __func__); \ 41 fprintf(stderr, ## __VA_ARGS__); \ 42 } while (0) 43#else 44 #define DB_PRINT(...) 45#endif 46 47#define UART_SR_INTR_RTRIG 0x00000001 48#define UART_SR_INTR_REMPTY 0x00000002 49#define UART_SR_INTR_RFUL 0x00000004 50#define UART_SR_INTR_TEMPTY 0x00000008 51#define UART_SR_INTR_TFUL 0x00000010 52/* somewhat awkwardly, TTRIG is misaligned between SR and ISR */ 53#define UART_SR_TTRIG 0x00002000 54#define UART_INTR_TTRIG 0x00000400 55/* bits fields in CSR that correlate to CISR. If any of these bits are set in 56 * SR, then the same bit in CISR is set high too */ 57#define UART_SR_TO_CISR_MASK 0x0000001F 58 59#define UART_INTR_ROVR 0x00000020 60#define UART_INTR_FRAME 0x00000040 61#define UART_INTR_PARE 0x00000080 62#define UART_INTR_TIMEOUT 0x00000100 63#define UART_INTR_DMSI 0x00000200 64#define UART_INTR_TOVR 0x00001000 65 66#define UART_SR_RACTIVE 0x00000400 67#define UART_SR_TACTIVE 0x00000800 68#define UART_SR_FDELT 0x00001000 69 70#define UART_CR_RXRST 0x00000001 71#define UART_CR_TXRST 0x00000002 72#define UART_CR_RX_EN 0x00000004 73#define UART_CR_RX_DIS 0x00000008 74#define UART_CR_TX_EN 0x00000010 75#define UART_CR_TX_DIS 0x00000020 76#define UART_CR_RST_TO 0x00000040 77#define UART_CR_STARTBRK 0x00000080 78#define UART_CR_STOPBRK 0x00000100 79 80#define UART_MR_CLKS 0x00000001 81#define UART_MR_CHRL 0x00000006 82#define UART_MR_CHRL_SH 1 83#define UART_MR_PAR 0x00000038 84#define UART_MR_PAR_SH 3 85#define UART_MR_NBSTOP 0x000000C0 86#define UART_MR_NBSTOP_SH 6 87#define UART_MR_CHMODE 0x00000300 88#define UART_MR_CHMODE_SH 8 89#define UART_MR_UCLKEN 0x00000400 90#define UART_MR_IRMODE 0x00000800 91 92#define UART_DATA_BITS_6 (0x3 << UART_MR_CHRL_SH) 93#define UART_DATA_BITS_7 (0x2 << UART_MR_CHRL_SH) 94#define UART_PARITY_ODD (0x1 << UART_MR_PAR_SH) 95#define UART_PARITY_EVEN (0x0 << UART_MR_PAR_SH) 96#define UART_STOP_BITS_1 (0x3 << UART_MR_NBSTOP_SH) 97#define UART_STOP_BITS_2 (0x2 << UART_MR_NBSTOP_SH) 98#define NORMAL_MODE (0x0 << UART_MR_CHMODE_SH) 99#define ECHO_MODE (0x1 << UART_MR_CHMODE_SH) 100#define LOCAL_LOOPBACK (0x2 << UART_MR_CHMODE_SH) 101#define REMOTE_LOOPBACK (0x3 << UART_MR_CHMODE_SH) 102 103#define UART_DEFAULT_REF_CLK (50 * 1000 * 1000) 104 105#define R_CR (0x00/4) 106#define R_MR (0x04/4) 107#define R_IER (0x08/4) 108#define R_IDR (0x0C/4) 109#define R_IMR (0x10/4) 110#define R_CISR (0x14/4) 111#define R_BRGR (0x18/4) 112#define R_RTOR (0x1C/4) 113#define R_RTRIG (0x20/4) 114#define R_MCR (0x24/4) 115#define R_MSR (0x28/4) 116#define R_SR (0x2C/4) 117#define R_TX_RX (0x30/4) 118#define R_BDIV (0x34/4) 119#define R_FDEL (0x38/4) 120#define R_PMIN (0x3C/4) 121#define R_PWID (0x40/4) 122#define R_TTRIG (0x44/4) 123 124 125static void uart_update_status(CadenceUARTState *s) 126{ 127 s->r[R_SR] = 0; 128 129 s->r[R_SR] |= s->rx_count == CADENCE_UART_RX_FIFO_SIZE ? UART_SR_INTR_RFUL 130 : 0; 131 s->r[R_SR] |= !s->rx_count ? UART_SR_INTR_REMPTY : 0; 132 s->r[R_SR] |= s->rx_count >= s->r[R_RTRIG] ? UART_SR_INTR_RTRIG : 0; 133 134 s->r[R_SR] |= s->tx_count == CADENCE_UART_TX_FIFO_SIZE ? UART_SR_INTR_TFUL 135 : 0; 136 s->r[R_SR] |= !s->tx_count ? UART_SR_INTR_TEMPTY : 0; 137 s->r[R_SR] |= s->tx_count >= s->r[R_TTRIG] ? UART_SR_TTRIG : 0; 138 139 s->r[R_CISR] |= s->r[R_SR] & UART_SR_TO_CISR_MASK; 140 s->r[R_CISR] |= s->r[R_SR] & UART_SR_TTRIG ? UART_INTR_TTRIG : 0; 141 qemu_set_irq(s->irq, !!(s->r[R_IMR] & s->r[R_CISR])); 142} 143 144static void fifo_trigger_update(void *opaque) 145{ 146 CadenceUARTState *s = opaque; 147 148 if (s->r[R_RTOR]) { 149 s->r[R_CISR] |= UART_INTR_TIMEOUT; 150 uart_update_status(s); 151 } 152} 153 154static void uart_rx_reset(CadenceUARTState *s) 155{ 156 s->rx_wpos = 0; 157 s->rx_count = 0; 158 qemu_chr_fe_accept_input(&s->chr); 159} 160 161static void uart_tx_reset(CadenceUARTState *s) 162{ 163 s->tx_count = 0; 164} 165 166static void uart_send_breaks(CadenceUARTState *s) 167{ 168 int break_enabled = 1; 169 170 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_BREAK, 171 &break_enabled); 172} 173 174static void uart_parameters_setup(CadenceUARTState *s) 175{ 176 QEMUSerialSetParams ssp; 177 unsigned int baud_rate, packet_size, input_clk; 178 input_clk = clock_get_hz(s->refclk); 179 180 baud_rate = (s->r[R_MR] & UART_MR_CLKS) ? input_clk / 8 : input_clk; 181 baud_rate /= (s->r[R_BRGR] * (s->r[R_BDIV] + 1)); 182 trace_cadence_uart_baudrate(baud_rate); 183 184 ssp.speed = baud_rate; 185 186 packet_size = 1; 187 188 switch (s->r[R_MR] & UART_MR_PAR) { 189 case UART_PARITY_EVEN: 190 ssp.parity = 'E'; 191 packet_size++; 192 break; 193 case UART_PARITY_ODD: 194 ssp.parity = 'O'; 195 packet_size++; 196 break; 197 default: 198 ssp.parity = 'N'; 199 break; 200 } 201 202 switch (s->r[R_MR] & UART_MR_CHRL) { 203 case UART_DATA_BITS_6: 204 ssp.data_bits = 6; 205 break; 206 case UART_DATA_BITS_7: 207 ssp.data_bits = 7; 208 break; 209 default: 210 ssp.data_bits = 8; 211 break; 212 } 213 214 switch (s->r[R_MR] & UART_MR_NBSTOP) { 215 case UART_STOP_BITS_1: 216 ssp.stop_bits = 1; 217 break; 218 default: 219 ssp.stop_bits = 2; 220 break; 221 } 222 223 packet_size += ssp.data_bits + ssp.stop_bits; 224 if (ssp.speed == 0) { 225 /* 226 * Avoid division-by-zero below. 227 * TODO: find something better 228 */ 229 ssp.speed = 1; 230 } 231 s->char_tx_time = (NANOSECONDS_PER_SECOND / ssp.speed) * packet_size; 232 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); 233} 234 235static int uart_can_receive(void *opaque) 236{ 237 CadenceUARTState *s = opaque; 238 int ret; 239 uint32_t ch_mode; 240 241 /* ignore characters when unclocked or in reset */ 242 if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { 243 qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", 244 __func__); 245 return 0; 246 } 247 248 ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE); 249 ch_mode = s->r[R_MR] & UART_MR_CHMODE; 250 251 if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) { 252 ret = MIN(ret, CADENCE_UART_RX_FIFO_SIZE - s->rx_count); 253 } 254 if (ch_mode == REMOTE_LOOPBACK || ch_mode == ECHO_MODE) { 255 ret = MIN(ret, CADENCE_UART_TX_FIFO_SIZE - s->tx_count); 256 } 257 return ret; 258} 259 260static void uart_ctrl_update(CadenceUARTState *s) 261{ 262 if (s->r[R_CR] & UART_CR_TXRST) { 263 uart_tx_reset(s); 264 } 265 266 if (s->r[R_CR] & UART_CR_RXRST) { 267 uart_rx_reset(s); 268 } 269 270 s->r[R_CR] &= ~(UART_CR_TXRST | UART_CR_RXRST); 271 272 if (s->r[R_CR] & UART_CR_STARTBRK && !(s->r[R_CR] & UART_CR_STOPBRK)) { 273 uart_send_breaks(s); 274 } 275} 276 277static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size) 278{ 279 CadenceUARTState *s = opaque; 280 uint64_t new_rx_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 281 int i; 282 283 if ((s->r[R_CR] & UART_CR_RX_DIS) || !(s->r[R_CR] & UART_CR_RX_EN)) { 284 return; 285 } 286 287 if (s->rx_count == CADENCE_UART_RX_FIFO_SIZE) { 288 s->r[R_CISR] |= UART_INTR_ROVR; 289 } else { 290 for (i = 0; i < size; i++) { 291 s->rx_fifo[s->rx_wpos] = buf[i]; 292 s->rx_wpos = (s->rx_wpos + 1) % CADENCE_UART_RX_FIFO_SIZE; 293 s->rx_count++; 294 } 295 timer_mod(s->fifo_trigger_handle, new_rx_time + 296 (s->char_tx_time * 4)); 297 } 298 uart_update_status(s); 299} 300 301static gboolean cadence_uart_xmit(void *do_not_use, GIOCondition cond, 302 void *opaque) 303{ 304 CadenceUARTState *s = opaque; 305 int ret; 306 307 /* instant drain the fifo when there's no back-end */ 308 if (!qemu_chr_fe_backend_connected(&s->chr)) { 309 s->tx_count = 0; 310 return FALSE; 311 } 312 313 if (!s->tx_count) { 314 return FALSE; 315 } 316 317 ret = qemu_chr_fe_write(&s->chr, s->tx_fifo, s->tx_count); 318 319 if (ret >= 0) { 320 s->tx_count -= ret; 321 memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_count); 322 } 323 324 if (s->tx_count) { 325 guint r = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP, 326 cadence_uart_xmit, s); 327 if (!r) { 328 s->tx_count = 0; 329 return FALSE; 330 } 331 } 332 333 uart_update_status(s); 334 return FALSE; 335} 336 337static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf, 338 int size) 339{ 340 if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) { 341 return; 342 } 343 344 if (size > CADENCE_UART_TX_FIFO_SIZE - s->tx_count) { 345 size = CADENCE_UART_TX_FIFO_SIZE - s->tx_count; 346 /* 347 * This can only be a guest error via a bad tx fifo register push, 348 * as can_receive() should stop remote loop and echo modes ever getting 349 * us to here. 350 */ 351 qemu_log_mask(LOG_GUEST_ERROR, "cadence_uart: TxFIFO overflow"); 352 s->r[R_CISR] |= UART_INTR_ROVR; 353 } 354 355 memcpy(s->tx_fifo + s->tx_count, buf, size); 356 s->tx_count += size; 357 358 cadence_uart_xmit(NULL, G_IO_OUT, s); 359} 360 361static void uart_receive(void *opaque, const uint8_t *buf, int size) 362{ 363 CadenceUARTState *s = opaque; 364 uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE; 365 366 if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) { 367 uart_write_rx_fifo(opaque, buf, size); 368 } 369 if (ch_mode == REMOTE_LOOPBACK || ch_mode == ECHO_MODE) { 370 uart_write_tx_fifo(s, buf, size); 371 } 372} 373 374static void uart_event(void *opaque, QEMUChrEvent event) 375{ 376 CadenceUARTState *s = opaque; 377 uint8_t buf = '\0'; 378 379 /* ignore characters when unclocked or in reset */ 380 if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { 381 qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", 382 __func__); 383 return; 384 } 385 386 if (event == CHR_EVENT_BREAK) { 387 uart_write_rx_fifo(opaque, &buf, 1); 388 } 389 390 uart_update_status(s); 391} 392 393static void uart_read_rx_fifo(CadenceUARTState *s, uint32_t *c) 394{ 395 if ((s->r[R_CR] & UART_CR_RX_DIS) || !(s->r[R_CR] & UART_CR_RX_EN)) { 396 return; 397 } 398 399 if (s->rx_count) { 400 uint32_t rx_rpos = (CADENCE_UART_RX_FIFO_SIZE + s->rx_wpos - 401 s->rx_count) % CADENCE_UART_RX_FIFO_SIZE; 402 *c = s->rx_fifo[rx_rpos]; 403 s->rx_count--; 404 405 qemu_chr_fe_accept_input(&s->chr); 406 } else { 407 *c = 0; 408 } 409 410 uart_update_status(s); 411} 412 413static MemTxResult uart_write(void *opaque, hwaddr offset, 414 uint64_t value, unsigned size, MemTxAttrs attrs) 415{ 416 CadenceUARTState *s = opaque; 417 418 /* ignore access when unclocked or in reset */ 419 if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { 420 qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", 421 __func__); 422 return MEMTX_ERROR; 423 } 424 425 DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value); 426 offset >>= 2; 427 if (offset >= CADENCE_UART_R_MAX) { 428 return MEMTX_DECODE_ERROR; 429 } 430 switch (offset) { 431 case R_IER: /* ier (wts imr) */ 432 s->r[R_IMR] |= value; 433 break; 434 case R_IDR: /* idr (wtc imr) */ 435 s->r[R_IMR] &= ~value; 436 break; 437 case R_IMR: /* imr (read only) */ 438 break; 439 case R_CISR: /* cisr (wtc) */ 440 s->r[R_CISR] &= ~value; 441 break; 442 case R_TX_RX: /* UARTDR */ 443 switch (s->r[R_MR] & UART_MR_CHMODE) { 444 case NORMAL_MODE: 445 uart_write_tx_fifo(s, (uint8_t *) &value, 1); 446 break; 447 case LOCAL_LOOPBACK: 448 uart_write_rx_fifo(opaque, (uint8_t *) &value, 1); 449 break; 450 } 451 break; 452 case R_BRGR: /* Baud rate generator */ 453 if (value >= 0x01) { 454 s->r[offset] = value & 0xFFFF; 455 } 456 break; 457 case R_BDIV: /* Baud rate divider */ 458 if (value >= 0x04) { 459 s->r[offset] = value & 0xFF; 460 } 461 break; 462 default: 463 s->r[offset] = value; 464 } 465 466 switch (offset) { 467 case R_CR: 468 uart_ctrl_update(s); 469 break; 470 case R_MR: 471 uart_parameters_setup(s); 472 break; 473 } 474 uart_update_status(s); 475 476 return MEMTX_OK; 477} 478 479static MemTxResult uart_read(void *opaque, hwaddr offset, 480 uint64_t *value, unsigned size, MemTxAttrs attrs) 481{ 482 CadenceUARTState *s = opaque; 483 uint32_t c = 0; 484 485 /* ignore access when unclocked or in reset */ 486 if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { 487 qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", 488 __func__); 489 return MEMTX_ERROR; 490 } 491 492 offset >>= 2; 493 if (offset >= CADENCE_UART_R_MAX) { 494 return MEMTX_DECODE_ERROR; 495 } 496 if (offset == R_TX_RX) { 497 uart_read_rx_fifo(s, &c); 498 } else { 499 c = s->r[offset]; 500 } 501 502 DB_PRINT(" offset:%x data:%08x\n", (unsigned)(offset << 2), (unsigned)c); 503 *value = c; 504 return MEMTX_OK; 505} 506 507static const MemoryRegionOps uart_ops = { 508 .read_with_attrs = uart_read, 509 .write_with_attrs = uart_write, 510 .endianness = DEVICE_NATIVE_ENDIAN, 511}; 512 513static void cadence_uart_reset_init(Object *obj, ResetType type) 514{ 515 CadenceUARTState *s = CADENCE_UART(obj); 516 517 s->r[R_CR] = 0x00000128; 518 s->r[R_IMR] = 0; 519 s->r[R_CISR] = 0; 520 s->r[R_RTRIG] = 0x00000020; 521 s->r[R_BRGR] = 0x0000028B; 522 s->r[R_BDIV] = 0x0000000F; 523 s->r[R_TTRIG] = 0x00000020; 524} 525 526static void cadence_uart_reset_hold(Object *obj) 527{ 528 CadenceUARTState *s = CADENCE_UART(obj); 529 530 uart_rx_reset(s); 531 uart_tx_reset(s); 532 533 uart_update_status(s); 534} 535 536static void cadence_uart_realize(DeviceState *dev, Error **errp) 537{ 538 CadenceUARTState *s = CADENCE_UART(dev); 539 540 s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL, 541 fifo_trigger_update, s); 542 543 qemu_chr_fe_set_handlers(&s->chr, uart_can_receive, uart_receive, 544 uart_event, NULL, s, NULL, true); 545} 546 547static void cadence_uart_refclk_update(void *opaque, ClockEvent event) 548{ 549 CadenceUARTState *s = opaque; 550 551 /* recompute uart's speed on clock change */ 552 uart_parameters_setup(s); 553} 554 555static void cadence_uart_init(Object *obj) 556{ 557 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 558 CadenceUARTState *s = CADENCE_UART(obj); 559 560 memory_region_init_io(&s->iomem, obj, &uart_ops, s, "uart", 0x1000); 561 sysbus_init_mmio(sbd, &s->iomem); 562 sysbus_init_irq(sbd, &s->irq); 563 564 s->refclk = qdev_init_clock_in(DEVICE(obj), "refclk", 565 cadence_uart_refclk_update, s, ClockUpdate); 566 /* initialize the frequency in case the clock remains unconnected */ 567 clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK); 568 569 s->char_tx_time = (NANOSECONDS_PER_SECOND / 9600) * 10; 570} 571 572static int cadence_uart_pre_load(void *opaque) 573{ 574 CadenceUARTState *s = opaque; 575 576 /* the frequency will be overriden if the refclk field is present */ 577 clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK); 578 return 0; 579} 580 581static int cadence_uart_post_load(void *opaque, int version_id) 582{ 583 CadenceUARTState *s = opaque; 584 585 /* Ensure these two aren't invalid numbers */ 586 if (s->r[R_BRGR] < 1 || s->r[R_BRGR] & ~0xFFFF || 587 s->r[R_BDIV] <= 3 || s->r[R_BDIV] & ~0xFF) { 588 /* Value is invalid, abort */ 589 return 1; 590 } 591 592 uart_parameters_setup(s); 593 uart_update_status(s); 594 return 0; 595} 596 597static const VMStateDescription vmstate_cadence_uart = { 598 .name = "cadence_uart", 599 .version_id = 3, 600 .minimum_version_id = 2, 601 .pre_load = cadence_uart_pre_load, 602 .post_load = cadence_uart_post_load, 603 .fields = (VMStateField[]) { 604 VMSTATE_UINT32_ARRAY(r, CadenceUARTState, CADENCE_UART_R_MAX), 605 VMSTATE_UINT8_ARRAY(rx_fifo, CadenceUARTState, 606 CADENCE_UART_RX_FIFO_SIZE), 607 VMSTATE_UINT8_ARRAY(tx_fifo, CadenceUARTState, 608 CADENCE_UART_TX_FIFO_SIZE), 609 VMSTATE_UINT32(rx_count, CadenceUARTState), 610 VMSTATE_UINT32(tx_count, CadenceUARTState), 611 VMSTATE_UINT32(rx_wpos, CadenceUARTState), 612 VMSTATE_TIMER_PTR(fifo_trigger_handle, CadenceUARTState), 613 VMSTATE_CLOCK_V(refclk, CadenceUARTState, 3), 614 VMSTATE_END_OF_LIST() 615 }, 616}; 617 618static Property cadence_uart_properties[] = { 619 DEFINE_PROP_CHR("chardev", CadenceUARTState, chr), 620 DEFINE_PROP_END_OF_LIST(), 621}; 622 623static void cadence_uart_class_init(ObjectClass *klass, void *data) 624{ 625 DeviceClass *dc = DEVICE_CLASS(klass); 626 ResettableClass *rc = RESETTABLE_CLASS(klass); 627 628 dc->realize = cadence_uart_realize; 629 dc->vmsd = &vmstate_cadence_uart; 630 rc->phases.enter = cadence_uart_reset_init; 631 rc->phases.hold = cadence_uart_reset_hold; 632 device_class_set_props(dc, cadence_uart_properties); 633 } 634 635static const TypeInfo cadence_uart_info = { 636 .name = TYPE_CADENCE_UART, 637 .parent = TYPE_SYS_BUS_DEVICE, 638 .instance_size = sizeof(CadenceUARTState), 639 .instance_init = cadence_uart_init, 640 .class_init = cadence_uart_class_init, 641}; 642 643static void cadence_uart_register_types(void) 644{ 645 type_register_static(&cadence_uart_info); 646} 647 648type_init(cadence_uart_register_types)