ahci_internal.h (15075B)
1/* 2 * QEMU AHCI Emulation 3 * 4 * Copyright (c) 2010 qiaochong@loongson.cn 5 * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com> 6 * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de> 7 * Copyright (c) 2010 Alexander Graf <agraf@suse.de> 8 * 9 * This library is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU Lesser General Public 11 * License as published by the Free Software Foundation; either 12 * version 2.1 of the License, or (at your option) any later version. 13 * 14 * This library is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 17 * Lesser General Public License for more details. 18 * 19 * You should have received a copy of the GNU Lesser General Public 20 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 21 * 22 */ 23 24#ifndef HW_IDE_AHCI_INTERNAL_H 25#define HW_IDE_AHCI_INTERNAL_H 26 27#include "hw/ide/ahci.h" 28#include "hw/ide/internal.h" 29#include "hw/pci/pci.h" 30 31#define AHCI_MEM_BAR_SIZE 0x1000 32#define AHCI_MAX_PORTS 32 33#define AHCI_MAX_SG 168 /* hardware max is 64K */ 34#define AHCI_DMA_BOUNDARY 0xffffffff 35#define AHCI_USE_CLUSTERING 0 36#define AHCI_MAX_CMDS 32 37#define AHCI_CMD_SZ 32 38#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ) 39#define AHCI_RX_FIS_SZ 256 40#define AHCI_CMD_TBL_CDB 0x40 41#define AHCI_CMD_TBL_HDR_SZ 0x80 42#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16)) 43#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS) 44#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \ 45 AHCI_RX_FIS_SZ) 46 47#define AHCI_IRQ_ON_SG (1U << 31) 48#define AHCI_CMD_ATAPI (1 << 5) 49#define AHCI_CMD_WRITE (1 << 6) 50#define AHCI_CMD_PREFETCH (1 << 7) 51#define AHCI_CMD_RESET (1 << 8) 52#define AHCI_CMD_CLR_BUSY (1 << 10) 53 54#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ 55#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ 56#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ 57 58/* global controller registers */ 59enum AHCIHostReg { 60 AHCI_HOST_REG_CAP = 0, /* CAP: host capabilities */ 61 AHCI_HOST_REG_CTL = 1, /* GHC: global host control */ 62 AHCI_HOST_REG_IRQ_STAT = 2, /* IS: interrupt status */ 63 AHCI_HOST_REG_PORTS_IMPL = 3, /* PI: bitmap of implemented ports */ 64 AHCI_HOST_REG_VERSION = 4, /* VS: AHCI spec. version compliancy */ 65 AHCI_HOST_REG_CCC_CTL = 5, /* CCC_CTL: CCC Control */ 66 AHCI_HOST_REG_CCC_PORTS = 6, /* CCC_PORTS: CCC Ports */ 67 AHCI_HOST_REG_EM_LOC = 7, /* EM_LOC: Enclosure Mgmt Location */ 68 AHCI_HOST_REG_EM_CTL = 8, /* EM_CTL: Enclosure Mgmt Control */ 69 AHCI_HOST_REG_CAP2 = 9, /* CAP2: host capabilities, extended */ 70 AHCI_HOST_REG_BOHC = 10, /* BOHC: firmare/os handoff ctrl & status */ 71 AHCI_HOST_REG__COUNT = 11 72}; 73 74/* HOST_CTL bits */ 75#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ 76#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ 77#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */ 78 79/* HOST_CAP bits */ 80#define HOST_CAP_SSC (1 << 14) /* Slumber capable */ 81#define HOST_CAP_AHCI (1 << 18) /* AHCI only */ 82#define HOST_CAP_CLO (1 << 24) /* Command List Override support */ 83#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ 84#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ 85#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */ 86 87/* registers for each SATA port */ 88enum AHCIPortReg { 89 AHCI_PORT_REG_LST_ADDR = 0, /* PxCLB: command list DMA addr */ 90 AHCI_PORT_REG_LST_ADDR_HI = 1, /* PxCLBU: command list DMA addr hi */ 91 AHCI_PORT_REG_FIS_ADDR = 2, /* PxFB: FIS rx buf addr */ 92 AHCI_PORT_REG_FIS_ADDR_HI = 3, /* PxFBU: FIX rx buf addr hi */ 93 AHCI_PORT_REG_IRQ_STAT = 4, /* PxIS: interrupt status */ 94 AHCI_PORT_REG_IRQ_MASK = 5, /* PxIE: interrupt enable/disable mask */ 95 AHCI_PORT_REG_CMD = 6, /* PxCMD: port command */ 96 /* RESERVED */ 97 AHCI_PORT_REG_TFDATA = 8, /* PxTFD: taskfile data */ 98 AHCI_PORT_REG_SIG = 9, /* PxSIG: device TF signature */ 99 AHCI_PORT_REG_SCR_STAT = 10, /* PxSSTS: SATA phy register: SStatus */ 100 AHCI_PORT_REG_SCR_CTL = 11, /* PxSCTL: SATA phy register: SControl */ 101 AHCI_PORT_REG_SCR_ERR = 12, /* PxSERR: SATA phy register: SError */ 102 AHCI_PORT_REG_SCR_ACT = 13, /* PxSACT: SATA phy register: SActive */ 103 AHCI_PORT_REG_CMD_ISSUE = 14, /* PxCI: command issue */ 104 AHCI_PORT_REG_SCR_NOTIF = 15, /* PxSNTF: SATA phy register: SNotification */ 105 AHCI_PORT_REG_FIS_CTL = 16, /* PxFBS: Port multiplier switching ctl */ 106 AHCI_PORT_REG_DEV_SLEEP = 17, /* PxDEVSLP: device sleep control */ 107 /* RESERVED */ 108 AHCI_PORT_REG_VENDOR_1 = 28, /* PxVS: Vendor Specific */ 109 AHCI_PORT_REG_VENDOR_2 = 29, 110 AHCI_PORT_REG_VENDOR_3 = 30, 111 AHCI_PORT_REG_VENDOR_4 = 31, 112 AHCI_PORT_REG__COUNT = 32 113}; 114 115/* Port interrupt bit descriptors */ 116enum AHCIPortIRQ { 117 AHCI_PORT_IRQ_BIT_DHRS = 0, 118 AHCI_PORT_IRQ_BIT_PSS = 1, 119 AHCI_PORT_IRQ_BIT_DSS = 2, 120 AHCI_PORT_IRQ_BIT_SDBS = 3, 121 AHCI_PORT_IRQ_BIT_UFS = 4, 122 AHCI_PORT_IRQ_BIT_DPS = 5, 123 AHCI_PORT_IRQ_BIT_PCS = 6, 124 AHCI_PORT_IRQ_BIT_DMPS = 7, 125 /* RESERVED */ 126 AHCI_PORT_IRQ_BIT_PRCS = 22, 127 AHCI_PORT_IRQ_BIT_IPMS = 23, 128 AHCI_PORT_IRQ_BIT_OFS = 24, 129 /* RESERVED */ 130 AHCI_PORT_IRQ_BIT_INFS = 26, 131 AHCI_PORT_IRQ_BIT_IFS = 27, 132 AHCI_PORT_IRQ_BIT_HBDS = 28, 133 AHCI_PORT_IRQ_BIT_HBFS = 29, 134 AHCI_PORT_IRQ_BIT_TFES = 30, 135 AHCI_PORT_IRQ_BIT_CPDS = 31, 136 AHCI_PORT_IRQ__COUNT = 32 137}; 138 139 140/* PORT_IRQ_{STAT,MASK} bits */ 141#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */ 142#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ 143#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ 144#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ 145#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ 146#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ 147 /* reserved */ 148#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ 149#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ 150#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ 151 /* reserved */ 152#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ 153#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ 154#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ 155#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ 156#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ 157#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ 158#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ 159#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ 160 161#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ 162 PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ 163 PORT_IRQ_UNK_FIS) 164#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ 165 PORT_IRQ_HBUS_DATA_ERR) 166#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ 167 PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ 168 PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) 169 170/* PORT_CMD bits */ 171#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ 172#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ 173#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ 174#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ 175#define PORT_CMD_CLO (1 << 3) /* Command list override */ 176#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ 177#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ 178#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ 179 180#define PORT_CMD_ICC_MASK (0xfU << 28) /* i/f ICC state mask */ 181#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ 182#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ 183#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ 184 185#define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */ 186 187/* ap->flags bits */ 188#define AHCI_FLAG_NO_NCQ (1 << 24) 189#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */ 190#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */ 191#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */ 192#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */ 193 194#define ATA_SRST (1 << 2) /* software reset */ 195 196#define STATE_RUN 0 197#define STATE_RESET 1 198 199#define SATA_SCR_SSTATUS_DET_NODEV 0x0 200#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3 201 202#define SATA_SCR_SSTATUS_SPD_NODEV 0x00 203#define SATA_SCR_SSTATUS_SPD_GEN1 0x10 204 205#define SATA_SCR_SSTATUS_IPM_NODEV 0x000 206#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100 207 208#define AHCI_SCR_SCTL_DET 0xf 209 210#define SATA_FIS_TYPE_REGISTER_H2D 0x27 211#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80 212#define SATA_FIS_TYPE_REGISTER_D2H 0x34 213#define SATA_FIS_TYPE_PIO_SETUP 0x5f 214#define SATA_FIS_TYPE_SDB 0xA1 215 216#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f 217#define AHCI_CMD_HDR_PRDT_LEN 16 218 219#define SATA_SIGNATURE_CDROM 0xeb140101 220#define SATA_SIGNATURE_DISK 0x00000101 221 222#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x2c 223 224#define AHCI_PORT_REGS_START_ADDR 0x100 225#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f 226#define AHCI_PORT_ADDR_OFFSET_LEN 0x80 227 228#define AHCI_NUM_COMMAND_SLOTS 31 229#define AHCI_SUPPORTED_SPEED 20 230#define AHCI_SUPPORTED_SPEED_GEN1 1 231#define AHCI_VERSION_1_0 0x10000 232 233#define AHCI_PROGMODE_MAJOR_REV_1 1 234 235#define AHCI_COMMAND_TABLE_ACMD 0x40 236 237#define AHCI_PRDT_SIZE_MASK 0x3fffff 238 239#define IDE_FEATURE_DMA 1 240 241#define READ_FPDMA_QUEUED 0x60 242#define WRITE_FPDMA_QUEUED 0x61 243#define NCQ_NON_DATA 0x63 244#define RECEIVE_FPDMA_QUEUED 0x65 245#define SEND_FPDMA_QUEUED 0x64 246 247#define NCQ_FIS_FUA_MASK 0x80 248#define NCQ_FIS_RARC_MASK 0x01 249 250#define RES_FIS_DSFIS 0x00 251#define RES_FIS_PSFIS 0x20 252#define RES_FIS_RFIS 0x40 253#define RES_FIS_SDBFIS 0x58 254#define RES_FIS_UFIS 0x60 255 256#define SATA_CAP_SIZE 0x8 257#define SATA_CAP_REV 0x2 258#define SATA_CAP_BAR 0x4 259 260typedef struct AHCIPortRegs { 261 uint32_t lst_addr; 262 uint32_t lst_addr_hi; 263 uint32_t fis_addr; 264 uint32_t fis_addr_hi; 265 uint32_t irq_stat; 266 uint32_t irq_mask; 267 uint32_t cmd; 268 uint32_t unused0; 269 uint32_t tfdata; 270 uint32_t sig; 271 uint32_t scr_stat; 272 uint32_t scr_ctl; 273 uint32_t scr_err; 274 uint32_t scr_act; 275 uint32_t cmd_issue; 276 uint32_t reserved; 277} AHCIPortRegs; 278 279typedef struct AHCICmdHdr { 280 uint16_t opts; 281 uint16_t prdtl; 282 uint32_t status; 283 uint64_t tbl_addr; 284 uint32_t reserved[4]; 285} QEMU_PACKED AHCICmdHdr; 286 287typedef struct AHCI_SG { 288 uint64_t addr; 289 uint32_t reserved; 290 uint32_t flags_size; 291} QEMU_PACKED AHCI_SG; 292 293typedef struct NCQTransferState { 294 AHCIDevice *drive; 295 BlockAIOCB *aiocb; 296 AHCICmdHdr *cmdh; 297 QEMUSGList sglist; 298 BlockAcctCookie acct; 299 uint32_t sector_count; 300 uint64_t lba; 301 uint8_t tag; 302 uint8_t cmd; 303 uint8_t slot; 304 bool used; 305 bool halt; 306} NCQTransferState; 307 308struct AHCIDevice { 309 IDEDMA dma; 310 IDEBus port; 311 int port_no; 312 uint32_t port_state; 313 uint32_t finished; 314 AHCIPortRegs port_regs; 315 struct AHCIState *hba; 316 QEMUBH *check_bh; 317 uint8_t *lst; 318 uint8_t *res_fis; 319 bool done_first_drq; 320 int32_t busy_slot; 321 bool init_d2h_sent; 322 AHCICmdHdr *cur_cmd; 323 NCQTransferState ncq_tfs[AHCI_MAX_CMDS]; 324}; 325 326struct AHCIPCIState { 327 /*< private >*/ 328 PCIDevice parent_obj; 329 /*< public >*/ 330 331 AHCIState ahci; 332}; 333 334extern const VMStateDescription vmstate_ahci; 335 336#define VMSTATE_AHCI(_field, _state) { \ 337 .name = (stringify(_field)), \ 338 .size = sizeof(AHCIState), \ 339 .vmsd = &vmstate_ahci, \ 340 .flags = VMS_STRUCT, \ 341 .offset = vmstate_offset_value(_state, _field, AHCIState), \ 342} 343 344/** 345 * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2), 346 * but some fields have been re-mapped and re-purposed, as seen in 347 * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED") 348 * 349 * cmd_fis[3], feature 7:0, becomes sector count 7:0. 350 * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit. 351 * cmd_fis[11], feature 15:8, becomes sector count 15:8. 352 * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0) 353 * cmd_fis[13], count 15:8, becomes the priority value (7:6) 354 * bytes 16-19 become an le32 "auxiliary" field. 355 */ 356typedef struct NCQFrame { 357 uint8_t fis_type; 358 uint8_t c; 359 uint8_t command; 360 uint8_t sector_count_low; /* (feature 7:0) */ 361 uint8_t lba0; 362 uint8_t lba1; 363 uint8_t lba2; 364 uint8_t fua; /* (device 7:0) */ 365 uint8_t lba3; 366 uint8_t lba4; 367 uint8_t lba5; 368 uint8_t sector_count_high; /* (feature 15:8) */ 369 uint8_t tag; /* (count 0:7) */ 370 uint8_t prio; /* (count 15:8) */ 371 uint8_t icc; 372 uint8_t control; 373 uint8_t aux0; 374 uint8_t aux1; 375 uint8_t aux2; 376 uint8_t aux3; 377} QEMU_PACKED NCQFrame; 378 379typedef struct SDBFIS { 380 uint8_t type; 381 uint8_t flags; 382 uint8_t status; 383 uint8_t error; 384 uint32_t payload; 385} QEMU_PACKED SDBFIS; 386 387void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports); 388void ahci_init(AHCIState *s, DeviceState *qdev); 389void ahci_uninit(AHCIState *s); 390 391void ahci_reset(AHCIState *s); 392 393#endif /* HW_IDE_AHCI_INTERNAL_H */