aspeed_scu.c (23657B)
1/* 2 * ASPEED System Control Unit 3 * 4 * Andrew Jeffery <andrew@aj.id.au> 5 * 6 * Copyright 2016 IBM Corp. 7 * 8 * This code is licensed under the GPL version 2 or later. See 9 * the COPYING file in the top-level directory. 10 */ 11 12#include "qemu/osdep.h" 13#include "hw/misc/aspeed_scu.h" 14#include "hw/qdev-properties.h" 15#include "migration/vmstate.h" 16#include "qapi/error.h" 17#include "qapi/visitor.h" 18#include "qemu/bitops.h" 19#include "qemu/log.h" 20#include "qemu/guest-random.h" 21#include "qemu/module.h" 22#include "trace.h" 23 24#define TO_REG(offset) ((offset) >> 2) 25 26#define PROT_KEY TO_REG(0x00) 27#define SYS_RST_CTRL TO_REG(0x04) 28#define CLK_SEL TO_REG(0x08) 29#define CLK_STOP_CTRL TO_REG(0x0C) 30#define FREQ_CNTR_CTRL TO_REG(0x10) 31#define FREQ_CNTR_EVAL TO_REG(0x14) 32#define IRQ_CTRL TO_REG(0x18) 33#define D2PLL_PARAM TO_REG(0x1C) 34#define MPLL_PARAM TO_REG(0x20) 35#define HPLL_PARAM TO_REG(0x24) 36#define FREQ_CNTR_RANGE TO_REG(0x28) 37#define MISC_CTRL1 TO_REG(0x2C) 38#define PCI_CTRL1 TO_REG(0x30) 39#define PCI_CTRL2 TO_REG(0x34) 40#define PCI_CTRL3 TO_REG(0x38) 41#define SYS_RST_STATUS TO_REG(0x3C) 42#define SOC_SCRATCH1 TO_REG(0x40) 43#define SOC_SCRATCH2 TO_REG(0x44) 44#define MAC_CLK_DELAY TO_REG(0x48) 45#define MISC_CTRL2 TO_REG(0x4C) 46#define VGA_SCRATCH1 TO_REG(0x50) 47#define VGA_SCRATCH2 TO_REG(0x54) 48#define VGA_SCRATCH3 TO_REG(0x58) 49#define VGA_SCRATCH4 TO_REG(0x5C) 50#define VGA_SCRATCH5 TO_REG(0x60) 51#define VGA_SCRATCH6 TO_REG(0x64) 52#define VGA_SCRATCH7 TO_REG(0x68) 53#define VGA_SCRATCH8 TO_REG(0x6C) 54#define HW_STRAP1 TO_REG(0x70) 55#define RNG_CTRL TO_REG(0x74) 56#define RNG_DATA TO_REG(0x78) 57#define SILICON_REV TO_REG(0x7C) 58#define PINMUX_CTRL1 TO_REG(0x80) 59#define PINMUX_CTRL2 TO_REG(0x84) 60#define PINMUX_CTRL3 TO_REG(0x88) 61#define PINMUX_CTRL4 TO_REG(0x8C) 62#define PINMUX_CTRL5 TO_REG(0x90) 63#define PINMUX_CTRL6 TO_REG(0x94) 64#define WDT_RST_CTRL TO_REG(0x9C) 65#define PINMUX_CTRL7 TO_REG(0xA0) 66#define PINMUX_CTRL8 TO_REG(0xA4) 67#define PINMUX_CTRL9 TO_REG(0xA8) 68#define WAKEUP_EN TO_REG(0xC0) 69#define WAKEUP_CTRL TO_REG(0xC4) 70#define HW_STRAP2 TO_REG(0xD0) 71#define FREE_CNTR4 TO_REG(0xE0) 72#define FREE_CNTR4_EXT TO_REG(0xE4) 73#define CPU2_CTRL TO_REG(0x100) 74#define CPU2_BASE_SEG1 TO_REG(0x104) 75#define CPU2_BASE_SEG2 TO_REG(0x108) 76#define CPU2_BASE_SEG3 TO_REG(0x10C) 77#define CPU2_BASE_SEG4 TO_REG(0x110) 78#define CPU2_BASE_SEG5 TO_REG(0x114) 79#define CPU2_CACHE_CTRL TO_REG(0x118) 80#define CHIP_ID0 TO_REG(0x150) 81#define CHIP_ID1 TO_REG(0x154) 82#define UART_HPLL_CLK TO_REG(0x160) 83#define PCIE_CTRL TO_REG(0x180) 84#define BMC_MMIO_CTRL TO_REG(0x184) 85#define RELOC_DECODE_BASE1 TO_REG(0x188) 86#define RELOC_DECODE_BASE2 TO_REG(0x18C) 87#define MAILBOX_DECODE_BASE TO_REG(0x190) 88#define SRAM_DECODE_BASE1 TO_REG(0x194) 89#define SRAM_DECODE_BASE2 TO_REG(0x198) 90#define BMC_REV TO_REG(0x19C) 91#define BMC_DEV_ID TO_REG(0x1A4) 92 93#define AST2600_PROT_KEY TO_REG(0x00) 94#define AST2600_SILICON_REV TO_REG(0x04) 95#define AST2600_SILICON_REV2 TO_REG(0x14) 96#define AST2600_SYS_RST_CTRL TO_REG(0x40) 97#define AST2600_SYS_RST_CTRL_CLR TO_REG(0x44) 98#define AST2600_SYS_RST_CTRL2 TO_REG(0x50) 99#define AST2600_SYS_RST_CTRL2_CLR TO_REG(0x54) 100#define AST2600_CLK_STOP_CTRL TO_REG(0x80) 101#define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84) 102#define AST2600_CLK_STOP_CTRL2 TO_REG(0x90) 103#define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94) 104#define AST2600_DEBUG_CTRL TO_REG(0xC8) 105#define AST2600_DEBUG_CTRL2 TO_REG(0xD8) 106#define AST2600_SDRAM_HANDSHAKE TO_REG(0x100) 107#define AST2600_HPLL_PARAM TO_REG(0x200) 108#define AST2600_HPLL_EXT TO_REG(0x204) 109#define AST2600_APLL_PARAM TO_REG(0x210) 110#define AST2600_APLL_EXT TO_REG(0x214) 111#define AST2600_MPLL_PARAM TO_REG(0x220) 112#define AST2600_MPLL_EXT TO_REG(0x224) 113#define AST2600_EPLL_PARAM TO_REG(0x240) 114#define AST2600_EPLL_EXT TO_REG(0x244) 115#define AST2600_DPLL_PARAM TO_REG(0x260) 116#define AST2600_DPLL_EXT TO_REG(0x264) 117#define AST2600_CLK_SEL TO_REG(0x300) 118#define AST2600_CLK_SEL2 TO_REG(0x304) 119#define AST2600_CLK_SEL3 TO_REG(0x308) 120#define AST2600_CLK_SEL4 TO_REG(0x310) 121#define AST2600_CLK_SEL5 TO_REG(0x314) 122#define AST2600_UARTCLK TO_REG(0x338) 123#define AST2600_HUARTCLK TO_REG(0x33C) 124#define AST2600_HW_STRAP1 TO_REG(0x500) 125#define AST2600_HW_STRAP1_CLR TO_REG(0x504) 126#define AST2600_HW_STRAP1_PROT TO_REG(0x508) 127#define AST2600_HW_STRAP2 TO_REG(0x510) 128#define AST2600_HW_STRAP2_CLR TO_REG(0x514) 129#define AST2600_HW_STRAP2_PROT TO_REG(0x518) 130#define AST2600_RNG_CTRL TO_REG(0x524) 131#define AST2600_RNG_DATA TO_REG(0x540) 132#define AST2600_CHIP_ID0 TO_REG(0x5B0) 133#define AST2600_CHIP_ID1 TO_REG(0x5B4) 134 135#define AST2600_CLK TO_REG(0x40) 136 137#define SCU_IO_REGION_SIZE 0x1000 138 139static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = { 140 [SYS_RST_CTRL] = 0xFFCFFEDCU, 141 [CLK_SEL] = 0xF3F40000U, 142 [CLK_STOP_CTRL] = 0x19FC3E8BU, 143 [D2PLL_PARAM] = 0x00026108U, 144 [MPLL_PARAM] = 0x00030291U, 145 [HPLL_PARAM] = 0x00000291U, 146 [MISC_CTRL1] = 0x00000010U, 147 [PCI_CTRL1] = 0x20001A03U, 148 [PCI_CTRL2] = 0x20001A03U, 149 [PCI_CTRL3] = 0x04000030U, 150 [SYS_RST_STATUS] = 0x00000001U, 151 [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */ 152 [MISC_CTRL2] = 0x00000023U, 153 [RNG_CTRL] = 0x0000000EU, 154 [PINMUX_CTRL2] = 0x0000F000U, 155 [PINMUX_CTRL3] = 0x01000000U, 156 [PINMUX_CTRL4] = 0x000000FFU, 157 [PINMUX_CTRL5] = 0x0000A000U, 158 [WDT_RST_CTRL] = 0x003FFFF3U, 159 [PINMUX_CTRL8] = 0xFFFF0000U, 160 [PINMUX_CTRL9] = 0x000FFFFFU, 161 [FREE_CNTR4] = 0x000000FFU, 162 [FREE_CNTR4_EXT] = 0x000000FFU, 163 [CPU2_BASE_SEG1] = 0x80000000U, 164 [CPU2_BASE_SEG4] = 0x1E600000U, 165 [CPU2_BASE_SEG5] = 0xC0000000U, 166 [UART_HPLL_CLK] = 0x00001903U, 167 [PCIE_CTRL] = 0x0000007BU, 168 [BMC_DEV_ID] = 0x00002402U 169}; 170 171/* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */ 172/* AST2500 revision A1 */ 173 174static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = { 175 [SYS_RST_CTRL] = 0xFFCFFEDCU, 176 [CLK_SEL] = 0xF3F40000U, 177 [CLK_STOP_CTRL] = 0x19FC3E8BU, 178 [D2PLL_PARAM] = 0x00026108U, 179 [MPLL_PARAM] = 0x00030291U, 180 [HPLL_PARAM] = 0x93000400U, 181 [MISC_CTRL1] = 0x00000010U, 182 [PCI_CTRL1] = 0x20001A03U, 183 [PCI_CTRL2] = 0x20001A03U, 184 [PCI_CTRL3] = 0x04000030U, 185 [SYS_RST_STATUS] = 0x00000001U, 186 [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */ 187 [MISC_CTRL2] = 0x00000023U, 188 [RNG_CTRL] = 0x0000000EU, 189 [PINMUX_CTRL2] = 0x0000F000U, 190 [PINMUX_CTRL3] = 0x03000000U, 191 [PINMUX_CTRL4] = 0x00000000U, 192 [PINMUX_CTRL5] = 0x0000A000U, 193 [WDT_RST_CTRL] = 0x023FFFF3U, 194 [PINMUX_CTRL8] = 0xFFFF0000U, 195 [PINMUX_CTRL9] = 0x000FFFFFU, 196 [FREE_CNTR4] = 0x000000FFU, 197 [FREE_CNTR4_EXT] = 0x000000FFU, 198 [CPU2_BASE_SEG1] = 0x80000000U, 199 [CPU2_BASE_SEG4] = 0x1E600000U, 200 [CPU2_BASE_SEG5] = 0xC0000000U, 201 [CHIP_ID0] = 0x1234ABCDU, 202 [CHIP_ID1] = 0x88884444U, 203 [UART_HPLL_CLK] = 0x00001903U, 204 [PCIE_CTRL] = 0x0000007BU, 205 [BMC_DEV_ID] = 0x00002402U 206}; 207 208static uint32_t aspeed_scu_get_random(void) 209{ 210 uint32_t num; 211 qemu_guest_getrandom_nofail(&num, sizeof(num)); 212 return num; 213} 214 215uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s) 216{ 217 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); 218 uint32_t hpll = asc->calc_hpll(s, s->regs[HPLL_PARAM]); 219 220 return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1) 221 / asc->apb_divider; 222} 223 224static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size) 225{ 226 AspeedSCUState *s = ASPEED_SCU(opaque); 227 int reg = TO_REG(offset); 228 229 if (reg >= ASPEED_SCU_NR_REGS) { 230 qemu_log_mask(LOG_GUEST_ERROR, 231 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 232 __func__, offset); 233 return 0; 234 } 235 236 switch (reg) { 237 case RNG_DATA: 238 /* On hardware, RNG_DATA works regardless of 239 * the state of the enable bit in RNG_CTRL 240 */ 241 s->regs[RNG_DATA] = aspeed_scu_get_random(); 242 break; 243 case WAKEUP_EN: 244 qemu_log_mask(LOG_GUEST_ERROR, 245 "%s: Read of write-only offset 0x%" HWADDR_PRIx "\n", 246 __func__, offset); 247 break; 248 } 249 250 return s->regs[reg]; 251} 252 253static void aspeed_ast2400_scu_write(void *opaque, hwaddr offset, 254 uint64_t data, unsigned size) 255{ 256 AspeedSCUState *s = ASPEED_SCU(opaque); 257 int reg = TO_REG(offset); 258 259 if (reg >= ASPEED_SCU_NR_REGS) { 260 qemu_log_mask(LOG_GUEST_ERROR, 261 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 262 __func__, offset); 263 return; 264 } 265 266 if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && 267 !s->regs[PROT_KEY]) { 268 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 269 } 270 271 trace_aspeed_scu_write(offset, size, data); 272 273 switch (reg) { 274 case PROT_KEY: 275 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 276 return; 277 case SILICON_REV: 278 case FREQ_CNTR_EVAL: 279 case VGA_SCRATCH1 ... VGA_SCRATCH8: 280 case RNG_DATA: 281 case FREE_CNTR4: 282 case FREE_CNTR4_EXT: 283 qemu_log_mask(LOG_GUEST_ERROR, 284 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 285 __func__, offset); 286 return; 287 } 288 289 s->regs[reg] = data; 290} 291 292static void aspeed_ast2500_scu_write(void *opaque, hwaddr offset, 293 uint64_t data, unsigned size) 294{ 295 AspeedSCUState *s = ASPEED_SCU(opaque); 296 int reg = TO_REG(offset); 297 298 if (reg >= ASPEED_SCU_NR_REGS) { 299 qemu_log_mask(LOG_GUEST_ERROR, 300 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 301 __func__, offset); 302 return; 303 } 304 305 if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && 306 !s->regs[PROT_KEY]) { 307 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 308 return; 309 } 310 311 trace_aspeed_scu_write(offset, size, data); 312 313 switch (reg) { 314 case PROT_KEY: 315 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 316 return; 317 case HW_STRAP1: 318 s->regs[HW_STRAP1] |= data; 319 return; 320 case SILICON_REV: 321 s->regs[HW_STRAP1] &= ~data; 322 return; 323 case FREQ_CNTR_EVAL: 324 case VGA_SCRATCH1 ... VGA_SCRATCH8: 325 case RNG_DATA: 326 case FREE_CNTR4: 327 case FREE_CNTR4_EXT: 328 case CHIP_ID0: 329 case CHIP_ID1: 330 qemu_log_mask(LOG_GUEST_ERROR, 331 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 332 __func__, offset); 333 return; 334 } 335 336 s->regs[reg] = data; 337} 338 339static const MemoryRegionOps aspeed_ast2400_scu_ops = { 340 .read = aspeed_scu_read, 341 .write = aspeed_ast2400_scu_write, 342 .endianness = DEVICE_LITTLE_ENDIAN, 343 .valid = { 344 .min_access_size = 1, 345 .max_access_size = 4, 346 }, 347}; 348 349static const MemoryRegionOps aspeed_ast2500_scu_ops = { 350 .read = aspeed_scu_read, 351 .write = aspeed_ast2500_scu_write, 352 .endianness = DEVICE_LITTLE_ENDIAN, 353 .valid.min_access_size = 4, 354 .valid.max_access_size = 4, 355 .valid.unaligned = false, 356}; 357 358static uint32_t aspeed_scu_get_clkin(AspeedSCUState *s) 359{ 360 if (s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN) { 361 return 25000000; 362 } else if (s->hw_strap1 & SCU_HW_STRAP_CLK_48M_IN) { 363 return 48000000; 364 } else { 365 return 24000000; 366 } 367} 368 369/* 370 * Strapped frequencies for the AST2400 in MHz. They depend on the 371 * clkin frequency. 372 */ 373static const uint32_t hpll_ast2400_freqs[][4] = { 374 { 384, 360, 336, 408 }, /* 24MHz or 48MHz */ 375 { 400, 375, 350, 425 }, /* 25MHz */ 376}; 377 378static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) 379{ 380 uint8_t freq_select; 381 bool clk_25m_in; 382 uint32_t clkin = aspeed_scu_get_clkin(s); 383 384 if (hpll_reg & SCU_AST2400_H_PLL_OFF) { 385 return 0; 386 } 387 388 if (hpll_reg & SCU_AST2400_H_PLL_PROGRAMMED) { 389 uint32_t multiplier = 1; 390 391 if (!(hpll_reg & SCU_AST2400_H_PLL_BYPASS_EN)) { 392 uint32_t n = (hpll_reg >> 5) & 0x3f; 393 uint32_t od = (hpll_reg >> 4) & 0x1; 394 uint32_t d = hpll_reg & 0xf; 395 396 multiplier = (2 - od) * ((n + 2) / (d + 1)); 397 } 398 399 return clkin * multiplier; 400 } 401 402 /* HW strapping */ 403 clk_25m_in = !!(s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN); 404 freq_select = SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(s->hw_strap1); 405 406 return hpll_ast2400_freqs[clk_25m_in][freq_select] * 1000000; 407} 408 409static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) 410{ 411 uint32_t multiplier = 1; 412 uint32_t clkin = aspeed_scu_get_clkin(s); 413 414 if (hpll_reg & SCU_H_PLL_OFF) { 415 return 0; 416 } 417 418 if (!(hpll_reg & SCU_H_PLL_BYPASS_EN)) { 419 uint32_t p = (hpll_reg >> 13) & 0x3f; 420 uint32_t m = (hpll_reg >> 5) & 0xff; 421 uint32_t n = hpll_reg & 0x1f; 422 423 multiplier = ((m + 1) / (n + 1)) / (p + 1); 424 } 425 426 return clkin * multiplier; 427} 428 429static void aspeed_scu_reset(DeviceState *dev) 430{ 431 AspeedSCUState *s = ASPEED_SCU(dev); 432 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 433 434 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 435 s->regs[SILICON_REV] = s->silicon_rev; 436 s->regs[HW_STRAP1] = s->hw_strap1; 437 s->regs[HW_STRAP2] = s->hw_strap2; 438 s->regs[PROT_KEY] = s->hw_prot_key; 439} 440 441static uint32_t aspeed_silicon_revs[] = { 442 AST2400_A0_SILICON_REV, 443 AST2400_A1_SILICON_REV, 444 AST2500_A0_SILICON_REV, 445 AST2500_A1_SILICON_REV, 446 AST2600_A0_SILICON_REV, 447 AST2600_A1_SILICON_REV, 448 AST2600_A2_SILICON_REV, 449 AST2600_A3_SILICON_REV, 450}; 451 452bool is_supported_silicon_rev(uint32_t silicon_rev) 453{ 454 int i; 455 456 for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) { 457 if (silicon_rev == aspeed_silicon_revs[i]) { 458 return true; 459 } 460 } 461 462 return false; 463} 464 465static void aspeed_scu_realize(DeviceState *dev, Error **errp) 466{ 467 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 468 AspeedSCUState *s = ASPEED_SCU(dev); 469 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 470 471 if (!is_supported_silicon_rev(s->silicon_rev)) { 472 error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, 473 s->silicon_rev); 474 return; 475 } 476 477 memory_region_init_io(&s->iomem, OBJECT(s), asc->ops, s, 478 TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE); 479 480 sysbus_init_mmio(sbd, &s->iomem); 481} 482 483static const VMStateDescription vmstate_aspeed_scu = { 484 .name = "aspeed.scu", 485 .version_id = 2, 486 .minimum_version_id = 2, 487 .fields = (VMStateField[]) { 488 VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_AST2600_SCU_NR_REGS), 489 VMSTATE_END_OF_LIST() 490 } 491}; 492 493static Property aspeed_scu_properties[] = { 494 DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0), 495 DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0), 496 DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0), 497 DEFINE_PROP_UINT32("hw-prot-key", AspeedSCUState, hw_prot_key, 0), 498 DEFINE_PROP_END_OF_LIST(), 499}; 500 501static void aspeed_scu_class_init(ObjectClass *klass, void *data) 502{ 503 DeviceClass *dc = DEVICE_CLASS(klass); 504 dc->realize = aspeed_scu_realize; 505 dc->reset = aspeed_scu_reset; 506 dc->desc = "ASPEED System Control Unit"; 507 dc->vmsd = &vmstate_aspeed_scu; 508 device_class_set_props(dc, aspeed_scu_properties); 509} 510 511static const TypeInfo aspeed_scu_info = { 512 .name = TYPE_ASPEED_SCU, 513 .parent = TYPE_SYS_BUS_DEVICE, 514 .instance_size = sizeof(AspeedSCUState), 515 .class_init = aspeed_scu_class_init, 516 .class_size = sizeof(AspeedSCUClass), 517 .abstract = true, 518}; 519 520static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data) 521{ 522 DeviceClass *dc = DEVICE_CLASS(klass); 523 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 524 525 dc->desc = "ASPEED 2400 System Control Unit"; 526 asc->resets = ast2400_a0_resets; 527 asc->calc_hpll = aspeed_2400_scu_calc_hpll; 528 asc->apb_divider = 2; 529 asc->nr_regs = ASPEED_SCU_NR_REGS; 530 asc->ops = &aspeed_ast2400_scu_ops; 531} 532 533static const TypeInfo aspeed_2400_scu_info = { 534 .name = TYPE_ASPEED_2400_SCU, 535 .parent = TYPE_ASPEED_SCU, 536 .instance_size = sizeof(AspeedSCUState), 537 .class_init = aspeed_2400_scu_class_init, 538}; 539 540static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data) 541{ 542 DeviceClass *dc = DEVICE_CLASS(klass); 543 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 544 545 dc->desc = "ASPEED 2500 System Control Unit"; 546 asc->resets = ast2500_a1_resets; 547 asc->calc_hpll = aspeed_2500_scu_calc_hpll; 548 asc->apb_divider = 4; 549 asc->nr_regs = ASPEED_SCU_NR_REGS; 550 asc->ops = &aspeed_ast2500_scu_ops; 551} 552 553static const TypeInfo aspeed_2500_scu_info = { 554 .name = TYPE_ASPEED_2500_SCU, 555 .parent = TYPE_ASPEED_SCU, 556 .instance_size = sizeof(AspeedSCUState), 557 .class_init = aspeed_2500_scu_class_init, 558}; 559 560static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset, 561 unsigned size) 562{ 563 AspeedSCUState *s = ASPEED_SCU(opaque); 564 int reg = TO_REG(offset); 565 566 if (reg >= ASPEED_AST2600_SCU_NR_REGS) { 567 qemu_log_mask(LOG_GUEST_ERROR, 568 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 569 __func__, offset); 570 return 0; 571 } 572 573 switch (reg) { 574 case AST2600_HPLL_EXT: 575 case AST2600_EPLL_EXT: 576 case AST2600_MPLL_EXT: 577 /* PLLs are always "locked" */ 578 return s->regs[reg] | BIT(31); 579 case AST2600_RNG_DATA: 580 /* 581 * On hardware, RNG_DATA works regardless of the state of the 582 * enable bit in RNG_CTRL 583 * 584 * TODO: Check this is true for ast2600 585 */ 586 s->regs[AST2600_RNG_DATA] = aspeed_scu_get_random(); 587 break; 588 } 589 590 return s->regs[reg]; 591} 592 593static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, 594 uint64_t data64, unsigned size) 595{ 596 AspeedSCUState *s = ASPEED_SCU(opaque); 597 int reg = TO_REG(offset); 598 /* Truncate here so bitwise operations below behave as expected */ 599 uint32_t data = data64; 600 601 if (reg >= ASPEED_AST2600_SCU_NR_REGS) { 602 qemu_log_mask(LOG_GUEST_ERROR, 603 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 604 __func__, offset); 605 return; 606 } 607 608 if (reg > PROT_KEY && !s->regs[PROT_KEY]) { 609 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 610 } 611 612 trace_aspeed_scu_write(offset, size, data); 613 614 switch (reg) { 615 case AST2600_PROT_KEY: 616 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 617 return; 618 case AST2600_HW_STRAP1: 619 case AST2600_HW_STRAP2: 620 if (s->regs[reg + 2]) { 621 return; 622 } 623 /* fall through */ 624 case AST2600_SYS_RST_CTRL: 625 case AST2600_SYS_RST_CTRL2: 626 case AST2600_CLK_STOP_CTRL: 627 case AST2600_CLK_STOP_CTRL2: 628 /* W1S (Write 1 to set) registers */ 629 s->regs[reg] |= data; 630 return; 631 case AST2600_SYS_RST_CTRL_CLR: 632 case AST2600_SYS_RST_CTRL2_CLR: 633 case AST2600_CLK_STOP_CTRL_CLR: 634 case AST2600_CLK_STOP_CTRL2_CLR: 635 case AST2600_HW_STRAP1_CLR: 636 case AST2600_HW_STRAP2_CLR: 637 /* 638 * W1C (Write 1 to clear) registers are offset by one address from 639 * the data register 640 */ 641 s->regs[reg - 1] &= ~data; 642 return; 643 644 case AST2600_RNG_DATA: 645 case AST2600_SILICON_REV: 646 case AST2600_SILICON_REV2: 647 case AST2600_CHIP_ID0: 648 case AST2600_CHIP_ID1: 649 /* Add read only registers here */ 650 qemu_log_mask(LOG_GUEST_ERROR, 651 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 652 __func__, offset); 653 return; 654 } 655 656 s->regs[reg] = data; 657} 658 659static const MemoryRegionOps aspeed_ast2600_scu_ops = { 660 .read = aspeed_ast2600_scu_read, 661 .write = aspeed_ast2600_scu_write, 662 .endianness = DEVICE_LITTLE_ENDIAN, 663 .valid.min_access_size = 4, 664 .valid.max_access_size = 4, 665 .valid.unaligned = false, 666}; 667 668static const uint32_t ast2600_a3_resets[ASPEED_AST2600_SCU_NR_REGS] = { 669 [AST2600_SYS_RST_CTRL] = 0xF7C3FED8, 670 [AST2600_SYS_RST_CTRL2] = 0x0DFFFFFC, 671 [AST2600_CLK_STOP_CTRL] = 0xFFFF7F8A, 672 [AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0, 673 [AST2600_DEBUG_CTRL] = 0x00000FFF, 674 [AST2600_DEBUG_CTRL2] = 0x000000FF, 675 [AST2600_SDRAM_HANDSHAKE] = 0x00000000, 676 [AST2600_HPLL_PARAM] = 0x1000408F, 677 [AST2600_APLL_PARAM] = 0x1000405F, 678 [AST2600_MPLL_PARAM] = 0x1008405F, 679 [AST2600_EPLL_PARAM] = 0x1004077F, 680 [AST2600_DPLL_PARAM] = 0x1078405F, 681 [AST2600_CLK_SEL] = 0xF3940000, 682 [AST2600_CLK_SEL2] = 0x00700000, 683 [AST2600_CLK_SEL3] = 0x00000000, 684 [AST2600_CLK_SEL4] = 0xF3F40000, 685 [AST2600_CLK_SEL5] = 0x30000000, 686 [AST2600_UARTCLK] = 0x00014506, 687 [AST2600_HUARTCLK] = 0x000145C0, 688 [AST2600_CHIP_ID0] = 0x1234ABCD, 689 [AST2600_CHIP_ID1] = 0x88884444, 690}; 691 692static void aspeed_ast2600_scu_reset(DeviceState *dev) 693{ 694 AspeedSCUState *s = ASPEED_SCU(dev); 695 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 696 697 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 698 699 /* 700 * A0 reports A0 in _REV, but subsequent revisions report A1 regardless 701 * of actual revision. QEMU and Linux only support A1 onwards so this is 702 * sufficient. 703 */ 704 s->regs[AST2600_SILICON_REV] = AST2600_A3_SILICON_REV; 705 s->regs[AST2600_SILICON_REV2] = s->silicon_rev; 706 s->regs[AST2600_HW_STRAP1] = s->hw_strap1; 707 s->regs[AST2600_HW_STRAP2] = s->hw_strap2; 708 s->regs[PROT_KEY] = s->hw_prot_key; 709} 710 711static void aspeed_2600_scu_class_init(ObjectClass *klass, void *data) 712{ 713 DeviceClass *dc = DEVICE_CLASS(klass); 714 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 715 716 dc->desc = "ASPEED 2600 System Control Unit"; 717 dc->reset = aspeed_ast2600_scu_reset; 718 asc->resets = ast2600_a3_resets; 719 asc->calc_hpll = aspeed_2500_scu_calc_hpll; /* No change since AST2500 */ 720 asc->apb_divider = 4; 721 asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS; 722 asc->ops = &aspeed_ast2600_scu_ops; 723} 724 725static const TypeInfo aspeed_2600_scu_info = { 726 .name = TYPE_ASPEED_2600_SCU, 727 .parent = TYPE_ASPEED_SCU, 728 .instance_size = sizeof(AspeedSCUState), 729 .class_init = aspeed_2600_scu_class_init, 730}; 731 732static void aspeed_scu_register_types(void) 733{ 734 type_register_static(&aspeed_scu_info); 735 type_register_static(&aspeed_2400_scu_info); 736 type_register_static(&aspeed_2500_scu_info); 737 type_register_static(&aspeed_2600_scu_info); 738} 739 740type_init(aspeed_scu_register_types);