summaryrefslogtreecommitdiffstats
path: root/include/exec/exec-all.h
Commit message (Collapse)AuthorAgeFilesLines
* include/exec: Move cpu_signal_handler declarationRichard Henderson2021-09-211-0/+13
| | | | | | | | | | There is nothing target specific about this. The implementation is host specific, but the declaration is 100% common. Reviewed-By: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Record singlestep_enabled in tb->cflagsRichard Henderson2021-07-211-0/+1
| | | | | | | | | | | Set CF_SINGLE_STEP when single-stepping is enabled. This avoids the need to flush all tb's when turning single-stepping on or off. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Add CF_NO_GOTO_TB and CF_NO_GOTO_PTRRichard Henderson2021-07-211-7/+9
| | | | | | | | | | | | | | | Move the -d nochain check to bits on tb->cflags. These will be used for more than -d nochain shortly. Set bits during curr_cflags, test them in translator_use_goto_tb, assert we're not doing anything odd in tcg_gen_goto_tb. The test in tcg_gen_exit_tb is redundant with the assert for goto_tb_issue_mask. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-4-richard.henderson@linaro.org>
* accel/tcg: Move curr_cflags into cpu-exec.cRichard Henderson2021-07-211-4/+1
| | | | | | | | | | | | We will shortly have more than a simple member read here, with stuff not necessarily exposed to exec/exec-all.h. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210717221851.2124573-3-richard.henderson@linaro.org>
* accel/tcg: Reduce CF_COUNT_MASK to match TCG_MAX_INSNSRichard Henderson2021-07-211-1/+3
| | | | | | | | | | | The space reserved for CF_COUNT_MASK was overly large. Reduce to free up cflags bits and eliminate an extra test. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210717221851.2124573-2-richard.henderson@linaro.org>
* accel/tcg: Reduce 'exec/tb-context.h' inclusionPhilippe Mathieu-Daudé2021-05-261-1/+0
| | | | | | | | | | | | | | | | | Only 2 headers require "exec/tb-context.h". Instead of having all files including "exec/exec-all.h" also including it, directly include it where it is required: - accel/tcg/cpu-exec.c - accel/tcg/translate-all.c For plugins/plugin.h, we were implicitly relying on exec/exec-all.h -> exec/tb-context.h -> qemu/qht.h which is now included directly. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210524170453.3791436-2-f4bug@amsat.org> [rth: Fix plugins/plugin.h compilation] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tlb: Add tlb_flush_range_by_mmuidx_all_cpus_synced()Richard Henderson2021-05-251-0/+12
| | | | | | | | | | | | | | Forward tlb_flush_page_bits_by_mmuidx_all_cpus_synced to tlb_flush_range_by_mmuidx_all_cpus_synced passing TARGET_PAGE_SIZE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210509151618.2331764-7-f4bug@amsat.org Message-Id: <20210508201640.1045808-1-richard.henderson@linaro.org> [PMD: Split from bigger patch] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* accel/tcg: Add tlb_flush_range_by_mmuidx_all_cpus()Richard Henderson2021-05-251-0/+13
| | | | | | | | | | | | | | Forward tlb_flush_page_bits_by_mmuidx_all_cpus to tlb_flush_range_by_mmuidx_all_cpus passing TARGET_PAGE_SIZE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210509151618.2331764-6-f4bug@amsat.org Message-Id: <20210508201640.1045808-1-richard.henderson@linaro.org> [PMD: Split from bigger patch] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* accel/tcg: Add tlb_flush_range_by_mmuidx()Richard Henderson2021-05-251-0/+19
| | | | | | | | | | | | | | Forward tlb_flush_page_bits_by_mmuidx to tlb_flush_range_by_mmuidx passing TARGET_PAGE_SIZE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210509151618.2331764-5-f4bug@amsat.org Message-Id: <20210508201640.1045808-1-richard.henderson@linaro.org> [PMD: Split from bigger patch] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* accel/tcg: Precompute curr_cflags into cpu->tcg_cflagsRichard Henderson2021-03-061-6/+1
| | | | | | | | | The primary motivation is to remove a dozen insns along the fast-path in tb_lookup. As a byproduct, this allows us to completely remove parallel_cpus. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* include/exec: lightly re-arrange TranslationBlockAlex Bennée2021-03-061-3/+8
| | | | | | | | | Lets make sure all the flags we compare when looking up blocks are together in the same place. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210224165811.11567-5-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: drop the use of CF_HASH_MASK and rename paramsAlex Bennée2021-03-061-3/+1
| | | | | | | | | | | We don't really deal in cf_mask most of the time. The one time it's relevant is when we want to remove an invalidated TB from the QHT lookup. Everywhere else we should be looking up things without CF_INVALID set. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210224165811.11567-4-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: move CF_CLUSTER calculation to curr_cflagsAlex Bennée2021-03-061-3/+5
| | | | | | | | | | There is nothing special about this compile flag that doesn't mean we can't just compute it with curr_cflags() which we should be using when building a new set. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210224165811.11567-3-alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: allow plugin instrumentation to be disable via cflagsAlex Bennée2021-02-181-3/+3
| | | | | | | | | | | | | | | | | | | When icount is enabled and we recompile an MMIO access we end up double counting the instruction execution. To avoid this we introduce the CF_MEMI cflag which only allows memory instrumentation for the next TB (which won't yet have been counted). As this is part of the hashed compile flags we will only execute the generated TB while coming out of a cpu_io_recompile. While we are at it delete the old TODO. We might as well keep the translation handy as it's likely you will repeatedly hit it on each MMIO access. Reported-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210213130325.14781-21-alex.bennee@linaro.org>
* accel/tcg: remove CF_NOCACHE and special casesAlex Bennée2021-02-181-3/+0
| | | | | | | | | | Now we no longer generate CF_NOCACHE blocks we can remove a bunch of the special case handling for them. While we are at it we can remove the unused tb->orig_tb field and save a few bytes on the TB structure. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210213130325.14781-20-alex.bennee@linaro.org>
* exec: Use cpu_untagged_addr in g2h; split out g2h_untaggedRichard Henderson2021-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Use g2h_untagged in contexts that have no cpu, e.g. the binary loaders that operate before the primary cpu is created. As a colollary, target_mmap and friends must use untagged addresses, since they are used by the loaders. Use g2h_untagged on values returned from target_mmap, as the kernel never applies a tag itself. Use g2h_untagged on all pc values. The only current user of tags, aarch64, removes tags from code addresses upon branch, so "pc" is always untagged. Use g2h with the cpu context on hand wherever possible. Use g2h_untagged in lock_user, which will be updated soon. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* tcg/tci: Make tci_tb_ptr thread-localRichard Henderson2021-02-051-1/+1
| | | | | | | | | | | | | Each thread must have its own pc, even under TCI. Remove the GETPC ifdef, because GETPC is always available for helpers, and thus is always required. Move the assignment under INDEX_op_call, because the value is only visible when we make a call to a helper function. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210204014509.882821-6-richard.henderson@linaro.org>
* accel/tcg: Restrict cpu_io_recompile() from other acceleratorsPhilippe Mathieu-Daudé2021-01-231-1/+0
| | | | | | | | | | As cpu_io_recompile() is only called within TCG accelerator in cputlb.c, declare it locally. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210117164813.4101761-6-f4bug@amsat.org> [rth: Adjust vs changed tb_flush_jmp_cache patch.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Restrict tb_gen_code() from other acceleratorsPhilippe Mathieu-Daudé2021-01-231-5/+0
| | | | | | | | | tb_gen_code() is only called within TCG accelerator, declare it locally. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210117164813.4101761-4-f4bug@amsat.org> [rth: Adjust vs changed tb_flush_jmp_cache patch.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Move tb_flush_jmp_cache() to cputlb.cRichard Henderson2021-01-231-3/+0
| | | | | | | | Move and make the function static, as the only users are here in cputlb.c. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Make cpu_gen_init() staticPhilippe Mathieu-Daudé2021-01-231-2/+0
| | | | | | | | | | cpu_gen_init() is TCG specific, only used in tcg/translate-all.c. No need to export it to other accelerators, declare it statically. Reviewed-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210117164813.4101761-2-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tcg: Introduce tcg_splitwx_to_{rx,rw}Richard Henderson2021-01-071-1/+1
| | | | | | | | | | | Add two helper functions, using a global variable to hold the displacement. The displacement is currently always 0, so no change in behaviour. Begin using the functions in tcg common code only. Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* vl: extract softmmu/globals.cPaolo Bonzini2020-12-151-3/+0
| | | | | Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* overall/alpha tcg cpus|hppa: Fix Lesser GPL version numberChetan Pant2020-11-151-1/+1
| | | | | | | | | | | | There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023123353.19796-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* accel/tcg: Add tlb_flush_page_bits_by_mmuidx*Richard Henderson2020-10-201-0/+36
| | | | | | | | | | | | | | | | On ARM, the Top Byte Ignore feature means that only 56 bits of the address are significant in the virtual address. We are required to give the entire 64-bit address to FAR_ELx on fault, which means that we do not "clean" the top byte early in TCG. This new interface allows us to flush all 256 possible aliases for a given page, currently missed by tlb_flush_page*. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201016210754.818257-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cpu-timers, icount: new modulesClaudio Fontana2020-10-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | refactoring of cpus.c continues with cpu timer state extraction. cpu-timers: responsible for the softmmu cpu timers state, including cpu clocks and ticks. icount: counts the TCG instructions executed. As such it is specific to the TCG accelerator. Therefore, it is built only under CONFIG_TCG. One complication is due to qtest, which uses an icount field to warp time as part of qtest (qtest_clock_warp). In order to solve this problem, provide a separate counter for qtest. This requires fixing assumptions scattered in the code that qtest_enabled() implies icount_enabled(), checking each specific case. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [remove redundant initialization with qemu_spice_init] Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [fix lingering calls to icount_get] Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi2020-09-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
* cputlb: destroy CPUTLB with tlb_destroyEmilio G. Cota2020-06-161-0/+8
| | | | | | | | | | | | I was after adding qemu_spin_destroy calls, but while at it I noticed that we are leaking some memory. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200609200738.445-5-robert.foley@linaro.org> Message-Id: <20200612190237.30436-8-alex.bennee@linaro.org>
* accel/tcg: Add probe_access_flagsRichard Henderson2020-05-111-0/+22
| | | | | | | | | | | | | This new interface will allow targets to probe for a page and then handle watchpoints themselves. This will be most useful for vector predicated memory operations, where one page lookup can be used for many operations, and one test can avoid many watchpoint checks. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* accel/tcg: Add block comment for probe_accessRichard Henderson2020-05-111-0/+17
| | | | | | | Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* tcg: cputlb: Add probe_readBeata Michalska2019-12-161-0/+6
| | | | | | | | | | Add probe_read alongside the write probing equivalent. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191121000843.24844-2-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* include/exec: wrap cpu_ldst.h in CONFIG_TCGAlex Bennée2019-10-281-0/+2
| | | | | | | This gets around a build problem with --disable-tcg. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* cputlb: introduce get_page_addr_code_hostpEmilio G. Cota2019-10-281-0/+38
| | | | | | | | | This will be used by plugins to get the host address of instructions. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* cputlb: document get_page_addr_codeEmilio G. Cota2019-10-281-3/+21
| | | | | | | Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* s390x/tcg: MVCL: Exit to main loop if requestedDavid Hildenbrand2019-10-101-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MVCL is interruptible and we should check for interrupts and process them after writing back the variables to the registers. Let's check for any exit requests and exit to the main loop. Introduce a new helper function for that: cpu_loop_exit_requested(). When booting Fedora 30, I can see a handful of these exits and it seems to work reliable. Also, Richard explained why this works correctly even when MVCL is called via EXECUTE: (1) TB with EXECUTE runs, at address Ae - env->psw_addr stored with Ae. - helper_ex() runs, memory address Am computed from D2a(X2a,B2a) or from psw.addr+RI2. - env->ex_value stored with memory value modified by R1a (2) TB of executee runs, - env->ex_value stored with 0. - helper_mvcl() runs, using and updating R1b, R1b+1, R2b, R2b+1. (3a) helper_mvcl() completes, - TB of executee continues, psw.addr += ilen. - Next instruction is the one following EXECUTE. (3b) helper_mvcl() exits to main loop, - cpu_loop_exit_restore() unwinds psw.addr = Ae. - Next instruction is the EXECUTE itself... - goto 1. As the PoP mentiones that an interruptible instruction called via EXECUTE should avoid modifying storage/registers that are used by EXECUTE itself, it is fine to retrigger EXECUTE. Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
* cputlb: Partially inline memory_region_section_get_iotlbRichard Henderson2019-09-251-5/+1
| | | | | | | | | | | | | | There is only one caller, tlb_set_page_with_attrs. We cannot inline the entire function because the AddressSpaceDispatch structure is private to exec.c, and cannot easily be moved to include/exec/memory-internal.h. Compute is_ram and is_romd once within tlb_set_page_with_attrs. Fold the number of tests against these predicates. Compute cpu_physical_memory_is_clean outside of the tlb lock region. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tcg: Factor out probe_write() logic into probe_access()David Hildenbrand2019-09-031-2/+8
| | | | | | | | | Let's also allow to probe other access types. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190830100959.26615-3-david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tcg: Make probe_write() return a pointer to the host pageDavid Hildenbrand2019-09-031-2/+2
| | | | | | | | | | ... similar to tlb_vaddr_to_host(); however, allow access to the host page except when TLB_NOTDIRTY or TLB_MMIO is set. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190830100959.26615-2-david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x codeDavid Hildenbrand2019-09-031-2/+2
| | | | | | | | | | | Factor it out into common code. Similar to the !CONFIG_USER_ONLY variant, let's not allow to cross page boundaries. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190826075112.25637-4-david@redhat.com> [rth: Move cpu & cc variables inside if block.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* include: Make headers more self-containedMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include qemu-common.h exactly where neededMarkus Armbruster2019-06-121-1/+0
| | | | | | | | | | | | | | | | No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
* tcg: Use CPUClass::tlb_fill in cputlb.cRichard Henderson2019-05-101-9/+0
| | | | | | | | | | | | We can now use the CPUClass hook instead of a named function. Create a static tlb_fill function to avoid other changes within cputlb.c. This also isolates the asserts within. Remove the named tlb_fill function from all of the targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tcg: Hoist max_insns computation to tb_gen_codeRichard Henderson2019-04-241-2/+2
| | | | | | | | | | In order to handle TB's that translate to too much code, we need to place the control of the length of the translation in the hands of the code gen master loop. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* exec-all: document that tlb_fill can trigger a TLB resizeEmilio G. Cota2019-02-111-0/+5
| | | | | | Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20190209162745.12668-2-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Add cluster number to TCG TB hashPeter Maydell2019-01-291-1/+3
| | | | | | | | | | | | | | | | | | | | | | | Include the cluster number in the hash we use to look up TBs. This is important because a TB that is valid for one cluster at a given physical address and set of CPU flags is not necessarily valid for another: the two clusters may have different views of physical memory, or may have different CPU features (eg FPU present or absent). We put the cluster number in the high 8 bits of the TB cflags. This gives us up to 256 clusters, which should be enough for anybody. If we ever need more, or need more bits in cflags for other purposes, we could make tb_hash_func() take more data (and expand qemu_xxhash7() to qemu_xxhash8()). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20190121152218.9592-4-peter.maydell@linaro.org
* exec: introduce tlb_initEmilio G. Cota2018-10-181-0/+8
| | | | | | | | | | Paves the way for the addition of a per-TLB lock. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-4-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* accel/tcg: Check whether TLB entry is RAM consistently with how we set it upPeter Maydell2018-08-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | We set up TLB entries in tlb_set_page_with_attrs(), where we have some logic for determining whether the TLB entry is considered to be RAM-backed, and thus has a valid addend field. When we look at the TLB entry in get_page_addr_code(), we use different logic for determining whether to treat the page as RAM-backed and use the addend field. This is confusing, and in fact buggy, because the code in tlb_set_page_with_attrs() correctly decides that rom_device memory regions not in romd mode are not RAM-backed, but the code in get_page_addr_code() thinks they are RAM-backed. This typically results in "Bad ram pointer" assertion if the guest tries to execute from such a memory region. Fix this by making get_page_addr_code() just look at the TLB_MMIO bit in the code_address field of the TLB, which tlb_set_page_with_attrs() sets if and only if the addend field is not valid for code execution. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180713150945.12348-1-peter.maydell@linaro.org
* tcg: simplify !CONFIG_TCG handling of tb_invalidate_*Paolo Bonzini2018-07-021-5/+3
| | | | | | | | | There is no need for a stub, since tb_invalidate_phys_addr can be excised altogether when TCG is disabled. This is a bit cleaner since it avoids using code that is clearly specific to user-mode emulation (it calls mmap_lock/unlock) for the !CONFIG_TCG case. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* tcg: Fix --disable-tcg build breakagePhilippe Mathieu-Daudé2018-07-021-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the --disable-tcg breakage introduced by 8bca9a03ec60d: $ configure --disable-tcg [...] $ make -C i386-softmmu exec.o make: Entering directory 'i386-softmmu' CC exec.o In file included from source/qemu/exec.c:62:0: source/qemu/include/exec/ram_addr.h:96:6: error: conflicting types for ‘tb_invalidate_phys_range’ void tb_invalidate_phys_range(ram_addr_t start, ram_addr_t end); ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from source/qemu/exec.c:24:0: source/qemu/include/exec/exec-all.h:309:6: note: previous declaration of ‘tb_invalidate_phys_range’ was here void tb_invalidate_phys_range(target_ulong start, target_ulong end); ^~~~~~~~~~~~~~~~~~~~~~~~ source/qemu/exec.c:1043:6: error: conflicting types for ‘tb_invalidate_phys_addr’ void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) ^~~~~~~~~~~~~~~~~~~~~~~ In file included from source/qemu/exec.c:24:0: source/qemu/include/exec/exec-all.h:308:6: note: previous declaration of ‘tb_invalidate_phys_addr’ was here void tb_invalidate_phys_addr(target_ulong addr); ^~~~~~~~~~~~~~~~~~~~~~~ make: *** [source/qemu/rules.mak:69: exec.o] Error 1 make: Leaving directory 'i386-softmmu' Tested to build x86_64-softmmu and i386-softmmu targets. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180629200710.27626-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* move public invalidate APIs out of translate-all.{c,h}, clean upPaolo Bonzini2018-06-281-4/+4
| | | | | | | | | Place them in exec.c, exec-all.h and ram_addr.h. This removes knowledge of translate-all.h (which is an internal header) from several files outside accel/tcg and removes knowledge of AddressSpace from translate-all.c (as it only operates on ram_addr_t). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3-71-gd317 (git 2.46.0) at 2026-02-11 14:27:09 +0000