| 2024-11-10 14:38 | Properly clear line when ip gets assigned | Louis Burda | 1 | +3 | -1 |
| 2024-11-09 03:58 | Remove test | Louis Burda | 1 | +1 | -1 |
| 2024-11-08 23:56 | Add test mode | Louis Burda | 4 | +27 | -9 |
| 2024-11-08 19:12 | Use 5.1K resistor instead of 4.7K for vreg | Louis Burda | 3 | +3 | -3 |
| 2024-11-05 01:34 | Add http server to control lights | Louis Burda | 2 | +109 | -30 |
| 2024-11-05 00:15 | Implement wifi connection | Louis Burda | 8 | +282 | -25 |
| 2024-10-27 15:53 | Fix usbc port tolerances and silk screen | Louis Burda | 6 | +6688 | -9657 |
| 2024-09-21 14:16 | Add v-cut separated dual usb board | Louis Burda | 54 | +25250 | -56720 |
| 2024-08-29 23:18 | Rev 0 | Louis Burda | 44 | +35107 | -10605 |
| 2024-08-19 02:48 | Switch to open drain driving (still has ESD issue) | Louis Burda | 32 | +42292 | -6452 |
| 2024-08-17 14:26 | Assign footprints and add solder jumper | Louis Burda | 5 | +10480 | -597 |
| 2024-08-17 14:25 | Adjust tolerances | Louis Burda | 1 | +78 | -53 |
| 2024-08-15 00:06 | Adjust usbc board dimensions and move into wall for access | Louis Burda | 1 | +19 | -11 |
| 2024-08-13 23:33 | Revise design with usbc board, oled and antenna | Louis Burda | 1 | +126 | -23 |
| 2024-08-13 19:35 | Add blink test firmware, docs and new schematic iterations | Louis Burda | 29 | +15632 | -64 |
| 2024-07-14 20:34 | Initial model design | Louis Burda | 8 | +97426 | -0 |
