1 files changed, 0 insertions, 58 deletions
diff --git a/src/ws2812.pio.h b/src/ws2812.pio.h
deleted file mode 100644
index e95f7ea..0000000
--- a/src/ws2812.pio.h
+++ /dev/null
@@ -1,58 +0,0 @@
-// -------------------------------------------------- //
-// This file is autogenerated by pioasm; do not edit! //
-// -------------------------------------------------- //
-
-#if !PICO_NO_HARDWARE
-#include "hardware/pio.h"
-#endif
-
-// ------ //
-// ws2812 //
-// ------ //
-
-#define ws2812_wrap_target 0
-#define ws2812_wrap 3
-
-#define ws2812_T1 2
-#define ws2812_T2 5
-#define ws2812_T3 3
-
-static const uint16_t ws2812_program_instructions[] = {
-            //     .wrap_target
-    0x6221, //  0: out    x, 1            side 0 [2] 
-    0x1123, //  1: jmp    !x, 3           side 1 [1] 
-    0x1400, //  2: jmp    0               side 1 [4] 
-    0xa442, //  3: nop                    side 0 [4] 
-            //     .wrap
-};
-
-#if !PICO_NO_HARDWARE
-static const struct pio_program ws2812_program = {
-    .instructions = ws2812_program_instructions,
-    .length = 4,
-    .origin = -1,
-};
-
-static inline pio_sm_config ws2812_program_get_default_config(uint offset) {
-    pio_sm_config c = pio_get_default_sm_config();
-    sm_config_set_wrap(&c, offset + ws2812_wrap_target, offset + ws2812_wrap);
-    sm_config_set_sideset(&c, 1, false, false);
-    return c;
-}
-
-#include "hardware/clocks.h"
-static inline void ws2812_program_init(PIO pio, uint sm, uint offset, uint pin, float freq, bool rgbw) {
-    pio_gpio_init(pio, pin);
-    pio_sm_set_consecutive_pindirs(pio, sm, pin, 1, true);
-    pio_sm_config c = ws2812_program_get_default_config(offset);
-    sm_config_set_sideset_pins(&c, pin);
-    sm_config_set_out_shift(&c, false, true, rgbw ? 32 : 24);
-    sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);
-    int cycles_per_bit = ws2812_T1 + ws2812_T2 + ws2812_T3;
-    float div = ((float) clock_get_hz(clk_sys)) / (freq * (float) cycles_per_bit);
-    sm_config_set_clkdiv(&c, div);
-    pio_sm_init(pio, sm, offset, &c);
-    pio_sm_set_enabled(pio, sm, true);
-}
-
-#endif